Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.38.2-25.bbel6.i686 (builder@bbel6.builds.kernelpanic.ru) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Tue Apr 5 18:29:26 MSD 2011 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) BIOS-e820: 000000007f6e0000 - 000000007f6e9000 (ACPI data) BIOS-e820: 000000007f6e9000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: FUJITSU SIEMENS LIFEBOOK S7110/FJNB1B5, BIOS Version 1.34 02/07/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7f6e0 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DBFFF uncachable DC000-DFFFF write-back E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01a00000 init_memory_mapping: 0000000000000000-0000000037bfe000 0000000000 - 0000200000 page 4k 0000200000 - 0037a00000 page 2M 0037a00000 - 0037bfe000 page 4k kernel direct mapping tables up to 37bfe000 @ 19fb000-1a00000 RAMDISK: 3721a000 - 37ff0000 Allocated new RAMDISK: 36444000 - 372190fe Move RAMDISK from 000000003721a000 - 0000000037fef0fd to 36444000 - 372190fd ACPI: RSDP 000f5760 00014 (v00 FUJ ) ACPI: RSDT 7f6e10ed 00044 (v01 FUJ FJNB1B5 01340000 FUJ 00000100) ACPI: FACP 7f6e8f8c 00074 (v01 FUJ FJNB1B5 01340000 FUJ 00000100) ACPI: DSDT 7f6e1141 06D68 (v01 FUJ FJNB1B5 01340000 MSFT 0100000E) ACPI: FACS 7f6e9fc0 00040 ACPI: SSDT 7f6e7ea9 00265 (v01 FUJ FJNB1B5 01340000 MSFT 0100000E) ACPI: MCFG 7f6e810e 0003C (v01 FUJ FJNB1B5 01340000 FUJ 00000100) ACPI: SSDT 7f6e814a 004DC (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: SSDT 7f6e8cfa 001CA (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: APIC 7f6e8ec4 00068 (v01 FUJ FJNB1B5 01340000 LTP 00000000) ACPI: HPET 7f6e8f2c 00038 (v01 FUJ FJNB1B5 01340000 FUJ 00000100) ACPI: BOOT 7f6e8f64 00028 (v01 FUJ FJNB1B5 01340000 FUJ 00000100) ACPI: Local APIC address 0xfee00000 1146MB HIGHMEM available. 891MB LOWMEM available. mapped low ram: 0 - 37bfe000 low ram: 0 - 37bfe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x00037bfe HighMem 0x00037bfe -> 0x0007f6e0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f6e0 On node 0 totalpages: 521839 free_area_init_node: node 0, pgdat c148f900, node_mem_map f5454200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1752 pages used for memmap Normal zone: 222502 pages, LIFO batch:31 HighMem zone: 2294 pages used for memmap HighMem zone: 291308 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:78000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @f7800000 s27072 r0 d22080 u1048576 pcpu-alloc: s27072 r0 d22080 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761 Kernel command line: ro root=UUID=790eb882-7b2e-44d5-83d7-5f45007fb1f9 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet LANG=en_US.UTF-8 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (00037bfe:0007f6e0) Memory: 2050368k/2087808k available (3424k kernel code, 36988k reserved, 1271k data, 436k init, 1174408k highmem) virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1496000 - 0xc1503000 ( 436 kB) .data : 0xc1358074 - 0xc1495dc0 (1271 kB) .text : 0xc1000000 - 0xc1358074 (3424 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:512 CPU 0 irqstacks, hard=f740c000 soft=f740e000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1994.597 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.41 BogoMIPS (lpj=6648656) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20110112 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 Performance Events: Core events, core PMU driver. ... version: 1 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 CPU 1 irqstacks, hard=f7498000 soft=f749a000 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (7982.69 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: SSDT 7f6e95c3 00893 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00893 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: SSDT 7f6e8626 001E8 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001E8 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: SSDT 7f6e8aa5 001D0 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001D0 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: SSDT 7f6e8a1e 00087 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00087 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: SSDT 7f6e8c75 00085 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 FUJ FJNB1B5 01340000 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: ACPI Dock Station Driver: 2 docks/bays found PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600 pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xf0400000-0xf043ffff] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xf0640000-0xf0643fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xf0644000-0xf06443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 06e8 (mask 0007) pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] pci 0000:00:1f.2: reg 24: [mem 0xf0644400-0xf06447ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] pci 0000:02:00.0: [11ab:4363] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.1: PCI bridge to [bus 03-04] pci 0000:00:1c.1: bridge window [io 0x0000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff] (disabled) pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff pref] (disabled) pci 0000:05:00.0: [8086:4222] type 0 class 0x000280 pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf0100fff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.2: PCI bridge to [bus 05-05] pci 0000:00:1c.2: bridge window [io 0x0000-0x0000] (disabled) pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff] (disabled) pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff pref] (disabled) pci 0000:08:03.0: [1217:7134] type 2 class 0x000607 pci 0000:08:03.0: reg 10: [mem 0x00000000-0x00000fff] pci 0000:08:03.0: supports D1 D2 pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:03.0: PME# disabled pci 0000:08:03.4: [1217:00f7] type 0 class 0x000c00 pci 0000:08:03.4: reg 10: [mem 0xf0200000-0xf0200fff] pci 0000:08:03.4: reg 14: [mem 0xf0201000-0xf02017ff] pci 0000:08:03.4: supports D1 D2 pci 0000:08:03.4: PME# supported from D0 D1 D2 D3hot pci 0000:08:03.4: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 08-09] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:08 [bus 08-09] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:05:00.0: no compatible bridge window for [mem 0xf0100000-0xf0100fff] reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000007f6e0000 - 000000007fffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0xf8000000-0xfbffffff] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0x000c0000-0x000c3fff window] pnp 00:01: [mem 0x000c4000-0x000c7fff window] pnp 00:01: [mem 0x000c8000-0x000cbfff window] pnp 00:01: [mem 0x000cc000-0x000cffff window] pnp 00:01: [mem 0x000d0000-0x000d3fff window] pnp 00:01: [mem 0x000d4000-0x000d7fff window] pnp 00:01: [mem 0x000d8000-0x000dbfff window] pnp 00:01: [mem 0x000dc000-0x000dffff window] pnp 00:01: [mem 0x000e0000-0x000e3fff window] pnp 00:01: [mem 0x000e4000-0x000e7fff window] pnp 00:01: [mem 0x000e8000-0x000ebfff window] pnp 00:01: [mem 0x000ec000-0x000effff window] pnp 00:01: [mem 0x000f0000-0x000fffff window] pnp 00:01: [mem 0x80000000-0xfebfffff window] pnp 00:01: [mem 0x00000000 window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: [io 0x0010-0x001f] pnp 00:02: [io 0x0024-0x0025] pnp 00:02: [io 0x0028-0x0029] pnp 00:02: [io 0x002c-0x002d] pnp 00:02: [io 0x002e-0x002f] pnp 00:02: [io 0x0030-0x0031] pnp 00:02: [io 0x0034-0x0035] pnp 00:02: [io 0x0038-0x0039] pnp 00:02: [io 0x003c-0x003d] pnp 00:02: [io 0x0050-0x0053] pnp 00:02: [io 0x0072-0x0077] pnp 00:02: [io 0x0080] pnp 00:02: [io 0x0090-0x009f] pnp 00:02: [io 0x00a4-0x00a5] pnp 00:02: [io 0x00a8-0x00a9] pnp 00:02: [io 0x00ac-0x00ad] pnp 00:02: [io 0x00b0-0x00b1] pnp 00:02: [io 0x00b2-0x00b3] pnp 00:02: [io 0x00b4-0x00b5] pnp 00:02: [io 0x00b8-0x00b9] pnp 00:02: [io 0x00bc-0x00bd] pnp 00:02: [io 0x04d0-0x04d1] pnp 00:02: [io 0x0800-0x080f] pnp 00:02: [io 0x1000-0x107f] pnp 00:02: [io 0x1080-0x10ff] pnp 00:02: [io 0x1100-0x111f] pnp 00:02: [io 0x1180-0x11bf] pnp 00:02: [io 0xf800-0xf87f] pnp 00:02: [io 0xf880-0xf8ff] pnp 00:02: [io 0xfc00-0xfc7f] pnp 00:02: [io 0xfc80-0xfcff] pnp 00:02: [io 0xfd0c-0xfd7f] pnp 00:02: [io 0xfe00-0xfe01] pnp 00:02: [mem 0xf8000000-0xfbffffff] pnp 00:02: [mem 0xfed14000-0xfed17fff] pnp 00:02: [mem 0xfed18000-0xfed18fff] pnp 00:02: [mem 0xfed19000-0xfed19fff] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] pnp 00:02: [mem 0xfed20000-0xfed3ffff] pnp 00:02: [mem 0xfed45000-0xfed8ffff] pnp 00:02: [mem 0xfec00000-0xfec00fff] pnp 00:02: [mem 0xfee00000-0xfee00fff] pnp 00:02: [mem 0xfef00000-0xfeffffff] pnp 00:02: [mem 0x000cec00-0x000cefff] pnp 00:02: [mem 0xffb00000-0xffbfffff] pnp 00:02: [mem 0xfed40000-0xfed44fff] system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x0800-0x080f] has been reserved system 00:02: [io 0x1000-0x107f] has been reserved system 00:02: [io 0x1080-0x10ff] has been reserved system 00:02: [io 0x1100-0x111f] has been reserved system 00:02: [io 0x1180-0x11bf] has been reserved system 00:02: [io 0xf800-0xf87f] has been reserved system 00:02: [io 0xf880-0xf8ff] has been reserved system 00:02: [io 0xfc00-0xfc7f] has been reserved system 00:02: [io 0xfc80-0xfcff] has been reserved system 00:02: [io 0xfd0c-0xfd7f] has been reserved system 00:02: [io 0xfe00-0xfe01] has been reserved system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved system 00:02: [mem 0xfef00000-0xfeffffff] has been reserved system 00:02: [mem 0x000cec00-0x000cefff] has been reserved system 00:02: [mem 0xffb00000-0xffbfffff] has been reserved system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0081-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0070-0x0071] pnp 00:04: [irq 8] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00fe] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:09: [mem 0xfed00000-0xfed003ff] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:0a: [io 0x02e8-0x02ef] pnp 00:0a: [io 0x06e8-0x06ef] pnp 00:0a: [irq 3] pnp 00:0a: [dma 3] pnp 00:0a: Plug and Play ACPI device, IDs SMCf010 (active) pnp 00:0b: [io 0x0378-0x037f] pnp 00:0b: [io 0x0778-0x077b] pnp 00:0b: [irq 7] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:00:1c.0: BAR 15: assigned [mem 0x84000000-0x841fffff pref] pci 0000:00:1c.1: BAR 14: assigned [mem 0x84200000-0x843fffff] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref] pci 0000:00:1c.2: BAR 14: assigned [mem 0x84600000-0x847fffff] pci 0000:00:1c.2: BAR 15: assigned [mem 0x84800000-0x849fffff 64bit pref] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:02:00.0: BAR 6: assigned [mem 0x84000000-0x8401ffff pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:00:1c.0: bridge window [mem 0x84000000-0x841fffff pref] pci 0000:00:1c.1: PCI bridge to [bus 03-04] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0x84200000-0x843fffff] pci 0000:00:1c.1: bridge window [mem 0x84400000-0x845fffff 64bit pref] pci 0000:05:00.0: BAR 0: assigned [mem 0x84600000-0x84600fff] pci 0000:05:00.0: BAR 0: set to [mem 0x84600000-0x84600fff] (PCI address [0x84600000-0x84600fff]) pci 0000:00:1c.2: PCI bridge to [bus 05-05] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.2: bridge window [mem 0x84600000-0x847fffff] pci 0000:00:1c.2: bridge window [mem 0x84800000-0x849fffff 64bit pref] pci 0000:08:03.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:08:03.0: BAR 16: assigned [mem 0x88000000-0x8bffffff] pci 0000:08:03.0: BAR 0: assigned [mem 0xf0202000-0xf0202fff] pci 0000:08:03.0: BAR 0: set to [mem 0xf0202000-0xf0202fff] (PCI address [0xf0202000-0xf0202fff]) pci 0000:08:03.0: BAR 13: assigned [io 0x5000-0x50ff] pci 0000:08:03.0: BAR 14: assigned [io 0x5400-0x54ff] pci 0000:08:03.0: CardBus bridge to [bus 09-0c] pci 0000:08:03.0: bridge window [io 0x5000-0x50ff] pci 0000:08:03.0: bridge window [io 0x5400-0x54ff] pci 0000:08:03.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:08:03.0: bridge window [mem 0x88000000-0x8bffffff] pci 0000:00:1e.0: PCI bridge to [bus 08-09] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0000 -> 0003) pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0000 -> 0003) pci 0000:00:1c.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf00fffff] pci_bus 0000:02: resource 2 [mem 0x84000000-0x841fffff pref] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0x84200000-0x843fffff] pci_bus 0000:03: resource 2 [mem 0x84400000-0x845fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0x84600000-0x847fffff] pci_bus 0000:05: resource 2 [mem 0x84800000-0x849fffff 64bit pref] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff] pci_bus 0000:08: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:08: resource 9 [mem 0x80000000-0xfebfffff] pci_bus 0000:09: resource 0 [io 0x5000-0x50ff] pci_bus 0000:09: resource 1 [io 0x5400-0x54ff] pci_bus 0000:09: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:09: resource 3 [mem 0x88000000-0x8bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 14168k freed Simple Boot Flag at 0x37 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1302216988.619:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 434 alg: No test for stdrng (krng) NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 brd: module loaded loop: module loaded Fixed MDIO Bus: probed i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 NET: Registered protocol family 17 Registering the dns_resolver key type Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:04: setting system clock to 2011-04-07 22:56:29 UTC (1302216989) Freeing unused kernel memory: 436k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 dracut: dracut-004-33.2.bbel6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com udev: starting version 147 udevd (66): /proc/66/oom_adj is deprecated, please use /proc/66/oom_score_adj instead. acpi device:02: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button [PWRF] [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support Refined TSC clocksource calibration: 1994.999 MHz. Switching to clocksource tsc Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04793/0x302000/0x0 serio: Synaptics pass-through port at isa0060/serio4/input0 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 175x65 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0644000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.38.2-25.bbel6.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata2: port disabled. ignoring. ata1.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.30, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.30 PQ: 0 ANSI: 5 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 43 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata3: SATA max UDMA/133 abar m1024@0xf0644400 port 0xf0644500 irq 43 ata4: DUMMY ata5: SATA max UDMA/133 abar m1024@0xf0644400 port 0xf0644600 irq 43 ata6: DUMMY ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133 ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.38.2-25.bbel6.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.38.2-25.bbel6.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.38.2-25.bbel6.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.38.2-25.bbel6.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk firewire_ohci 0000:08:03.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 firewire_ohci: Added fw-ohci device 0000:08:03.4, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0 yenta_cardbus 0000:08:03.0: CardBus bridge found [10cf:131e] yenta_cardbus 0000:08:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off' usb 2-2: new full speed USB device using uhci_hcd and address 2 yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:08:03.0: Socket status: 30000006 pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0xf0200000-0xf02fffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0200000-0xf02fffff: excluding 0xf0200000-0xf020ffff yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff usb 2-2: New USB device found, idVendor=046d, idProduct=c52b usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB Receiver usb 2-2: Manufacturer: Logitech input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input7 generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8 generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 5-2: new full speed USB device using uhci_hcd and address 2 firewire_core: created device fw0: GUID 00000e100365b032, S400 usb 5-2: New USB device found, idVendor=0c24, idProduct=000f usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 ehci_hcd 0000:00:1d.7: PCI INT A disabled ehci_hcd 0000:00:1d.7: PME# enabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled EXT4-fs (sda1): INFO: recovery required on readonly filesystem EXT4-fs (sda1): write access will be enabled during recovery input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input9 EXT4-fs (sda1): orphan cleanup on readonly fs EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 789801 EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 789799 EXT4-fs (sda1): 2 orphan inodes deleted EXT4-fs (sda1): recovery complete EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dracut: Mounted root filesystem /dev/sda1 dracut: Switching root udev: starting version 147 WARNING! power/level is deprecated; use power/control instead HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 sky2: driver version 1.28 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 sky2 0000:02:00.0: irq 45 for MSI/MSI-X sky2 0000:02:00.0: eth0: addr 00:17:42:13:b2:77 cfg80211: Calling CRDA to update world regulatory domain iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s iwl3945: Copyright(c) 2003-2010 Intel Corporation iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwl3945 0000:05:00.0: setting latency timer to 64 iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:05:00.0: irq 46 for MSI/MSI-X ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 input: PC Speaker as /devices/platform/pcspkr/input/input10 ACPI: acpi_idle registered with cpuidle Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [AC] (on-line) input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/FUJ02B1:00/input/input11 ACPI: Fujitsu FUJ02B1 [FJEX] (on) input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input12 ACPI: Fujitsu FUJ02E3 [FEXT] (on) fujitsu-laptop: BTNI: [0xff0101] fujitsu-laptop: driver 0.6.0 successfully loaded. ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [CMB1] (battery present) ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [CMB2] (battery absent) thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (27 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (27 C) parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 ppdev: user-space parallel port driver pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: RU cfg80211: Regulatory domain changed to country: RU cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) EXT4-fs (sda1): re-mounted. Opts: (null) Adding 2096124k swap on /dev/sda2. Priority:-1 extents:1 across:2096124k microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39 microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39 microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: Microcode Update Driver: v2.00 removed. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) sky2 0000:02:00.0: eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9 ADDRCONF(NETDEV_UP): wlan0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bluetooth: L2CAP ver 2.15 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Ebtables v2.0 registered ip6_tables: (C) 2000-2006 Netfilter Core Team uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xf0644000-0xf06443ff] (PCI address [0xf0644000-0xf06443ff]) ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled ehci_hcd 0000:00:1d.7: PME# enabled fuse init (API version 7.16) wlan0: deauthenticating from 00:60:b3:d7:f1:a5 by local choice (reason=3) wlan0: authenticate with 00:60:b3:d7:f1:a5 (try 1) wlan0: authenticated wlan0: associate with 00:60:b3:d7:f1:a5 (try 1) wlan0: RX AssocResp from 00:60:b3:d7:f1:a5 (capab=0x471 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A wlan0: no IPv6 routers present ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xf0644000-0xf06443ff] (PCI address [0xf0644000-0xf06443ff]) ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb 1-3: new high speed USB device using ehci_hcd and address 4 usb 1-3: New USB device found, idVendor=04a9, idProduct=31ea usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3: Product: Canon Digital Camera usb 1-3: Manufacturer: Canon Inc. uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled CE: hpet increased min_delta_ns to 20113 nsec process `skype' is using obsolete setsockopt SO_BSDCOMPAT uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled