From: Jan Kiszka <jan.kiszka@siemens.com>
To: Avi Kivity <avi@redhat.com>, Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm <kvm@vger.kernel.org>
Subject: [PATCH] KVM: Clean up and extend rate-limited output
Date: Mon, 12 Sep 2011 11:26:22 +0200 [thread overview]
Message-ID: <4E6DD03E.5010503@siemens.com> (raw)
The use of printk_ratelimit is discouraged, replace it with
pr*_ratelimited or __ratelimit. While at it, convert remaining
guest-triggerable printks to rate-limited variants.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
arch/x86/kvm/i8259.c | 15 ++++++++-------
arch/x86/kvm/mmu_audit.c | 6 +++---
arch/x86/kvm/vmx.c | 13 ++++++-------
include/linux/kvm_host.h | 8 +++-----
4 files changed, 20 insertions(+), 22 deletions(-)
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 6b869ce..cac4746 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -34,6 +34,9 @@
#include <linux/kvm_host.h>
#include "trace.h"
+#define pr_pic_unimpl(fmt, ...) \
+ pr_err_ratelimited("kvm: pic: " fmt, ## __VA_ARGS__)
+
static void pic_irq_request(struct kvm *kvm, int level);
static void pic_lock(struct kvm_pic *s)
@@ -306,10 +309,10 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
}
s->init_state = 1;
if (val & 0x02)
- printk(KERN_ERR "single mode not supported");
+ pr_pic_unimpl("single mode not supported");
if (val & 0x08)
- printk(KERN_ERR
- "level sensitive irq not supported");
+ pr_pic_unimpl(
+ "level sensitive irq not supported");
} else if (val & 0x08) {
if (val & 0x04)
s->poll = 1;
@@ -467,8 +470,7 @@ static int picdev_write(struct kvm_pic *s,
return -EOPNOTSUPP;
if (len != 1) {
- if (printk_ratelimit())
- printk(KERN_ERR "PIC: non byte write\n");
+ pr_pic_unimpl("non byte write\n");
return 0;
}
pic_lock(s);
@@ -496,8 +498,7 @@ static int picdev_read(struct kvm_pic *s,
return -EOPNOTSUPP;
if (len != 1) {
- if (printk_ratelimit())
- printk(KERN_ERR "PIC: non byte read\n");
+ pr_pic_unimpl("non byte read\n");
return 0;
}
pic_lock(s);
diff --git a/arch/x86/kvm/mmu_audit.c b/arch/x86/kvm/mmu_audit.c
index 2460a26..746ec25 100644
--- a/arch/x86/kvm/mmu_audit.c
+++ b/arch/x86/kvm/mmu_audit.c
@@ -121,16 +121,16 @@ static void audit_mappings(struct kvm_vcpu *vcpu, u64 *sptep, int level)
static void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
{
+ static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10);
unsigned long *rmapp;
struct kvm_mmu_page *rev_sp;
gfn_t gfn;
-
rev_sp = page_header(__pa(sptep));
gfn = kvm_mmu_page_get_gfn(rev_sp, sptep - rev_sp->spt);
if (!gfn_to_memslot(kvm, gfn)) {
- if (!printk_ratelimit())
+ if (!__ratelimit(&ratelimit_state))
return;
audit_printk(kvm, "no memslot for gfn %llx\n", gfn);
audit_printk(kvm, "index %ld of sp (gfn=%llx)\n",
@@ -141,7 +141,7 @@ static void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
rmapp = gfn_to_rmap(kvm, gfn, rev_sp->role.level);
if (!*rmapp) {
- if (!printk_ratelimit())
+ if (!__ratelimit(&ratelimit_state))
return;
audit_printk(kvm, "no rmap for writable spte %llx\n",
*sptep);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 21217b6..a0d6bd9 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2762,8 +2762,8 @@ static void enter_lmode(struct kvm_vcpu *vcpu)
guest_tr_ar = vmcs_read32(GUEST_TR_AR_BYTES);
if ((guest_tr_ar & AR_TYPE_MASK) != AR_TYPE_BUSY_64_TSS) {
- printk(KERN_DEBUG "%s: tss fixup for long mode. \n",
- __func__);
+ pr_debug_ratelimited("%s: tss fixup for long mode. \n",
+ __func__);
vmcs_write32(GUEST_TR_AR_BYTES,
(guest_tr_ar & ~AR_TYPE_MASK)
| AR_TYPE_BUSY_64_TSS);
@@ -5634,8 +5634,8 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
return 0;
if (unlikely(vmx->fail)) {
- printk(KERN_INFO "%s failed vm entry %x\n",
- __func__, vmcs_read32(VM_INSTRUCTION_ERROR));
+ pr_info_ratelimited("%s failed vm entry %x\n", __func__,
+ vmcs_read32(VM_INSTRUCTION_ERROR));
return 1;
}
@@ -6612,9 +6612,8 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
if (vmcs12->vm_entry_msr_load_count > 0 ||
vmcs12->vm_exit_msr_load_count > 0 ||
vmcs12->vm_exit_msr_store_count > 0) {
- if (printk_ratelimit())
- printk(KERN_WARNING
- "%s: VMCS MSR_{LOAD,STORE} unsupported\n", __func__);
+ pr_warn_ratelimited("%s: VMCS MSR_{LOAD,STORE} unsupported\n",
+ __func__);
nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
return 1;
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index d0e42f3..2a414f6 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -18,6 +18,7 @@
#include <linux/msi.h>
#include <linux/slab.h>
#include <linux/rcupdate.h>
+#include <linux/ratelimit.h>
#include <asm/signal.h>
#include <linux/kvm.h>
@@ -282,11 +283,8 @@ struct kvm {
/* The guest did something we don't support. */
#define pr_unimpl(vcpu, fmt, ...) \
- do { \
- if (printk_ratelimit()) \
- printk(KERN_ERR "kvm: %i: cpu%i " fmt, \
- current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__); \
- } while (0)
+ pr_err_ratelimited("kvm: %i: cpu%i " fmt, \
+ current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__)
#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
--
1.7.3.4
next reply other threads:[~2011-09-12 9:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 9:26 Jan Kiszka [this message]
2011-09-12 12:42 ` [PATCH] KVM: Clean up and extend rate-limited output Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E6DD03E.5010503@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox