kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matt Evans <matt@ozlabs.org>
To: kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Cc: penberg@kernel.org, asias.hejun@gmail.com,
	levinsasha928@gmail.com, gorcunov@gmail.com
Subject: [PATCH V2 13/23] kvm tools: Allow load_flat_binary() to load an initrd alongside
Date: Fri, 09 Dec 2011 17:54:43 +1100	[thread overview]
Message-ID: <4EE1B0B3.6090909@ozlabs.org> (raw)
In-Reply-To: <cover.1323413420.git.matt@ozlabs.org>

This patch passes the initrd fd and commandline to load_flat_binary(), which may
be used to load both the kernel & an initrd (stashing or inserting the
commandline as appropriate) in the same way that load_bzimage() does.  This is
especially useful when load_bzimage() is unused for a particular
architecture. :-)

Signed-off-by: Matt Evans <matt@ozlabs.org>
---
 tools/kvm/include/kvm/kvm.h |    2 +-
 tools/kvm/kvm.c             |   10 ++++++----
 tools/kvm/x86/kvm.c         |   13 ++++++++++---
 3 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/tools/kvm/include/kvm/kvm.h b/tools/kvm/include/kvm/kvm.h
index fae2ba9..5fe6e75 100644
--- a/tools/kvm/include/kvm/kvm.h
+++ b/tools/kvm/include/kvm/kvm.h
@@ -59,7 +59,7 @@ void kvm__arch_setup_firmware(struct kvm *kvm);
 bool kvm__arch_cpu_supports_vm(void);
 void kvm__arch_periodic_poll(struct kvm *kvm);
 
-int load_flat_binary(struct kvm *kvm, int fd);
+int load_flat_binary(struct kvm *kvm, int fd_kernel, int fd_initrd, const char *kernel_cmdline);
 bool load_bzimage(struct kvm *kvm, int fd_kernel, int fd_initrd, const char *kernel_cmdline, u16 vidmode);
 
 /*
diff --git a/tools/kvm/kvm.c b/tools/kvm/kvm.c
index d26e3d7..c54f886 100644
--- a/tools/kvm/kvm.c
+++ b/tools/kvm/kvm.c
@@ -388,23 +388,25 @@ bool kvm__load_kernel(struct kvm *kvm, const char *kernel_filename,
 
 	ret = load_bzimage(kvm, fd_kernel, fd_initrd, kernel_cmdline, vidmode);
 
-	if (initrd_filename)
-		close(fd_initrd);
-
 	if (ret)
 		goto found_kernel;
 
 	pr_warning("%s is not a bzImage. Trying to load it as a flat binary...", kernel_filename);
 
-	ret = load_flat_binary(kvm, fd_kernel);
+	ret = load_flat_binary(kvm, fd_kernel, fd_initrd, kernel_cmdline);
+
 	if (ret)
 		goto found_kernel;
 
+	if (initrd_filename)
+		close(fd_initrd);
 	close(fd_kernel);
 
 	die("%s is not a valid bzImage or flat binary", kernel_filename);
 
 found_kernel:
+	if (initrd_filename)
+		close(fd_initrd);
 	close(fd_kernel);
 
 	return ret;
diff --git a/tools/kvm/x86/kvm.c b/tools/kvm/x86/kvm.c
index b49b372..a116f4b 100644
--- a/tools/kvm/x86/kvm.c
+++ b/tools/kvm/x86/kvm.c
@@ -197,17 +197,24 @@ void kvm__irq_trigger(struct kvm *kvm, int irq)
 #define BOOT_PROTOCOL_REQUIRED	0x206
 #define LOAD_HIGH		0x01
 
-int load_flat_binary(struct kvm *kvm, int fd)
+int load_flat_binary(struct kvm *kvm, int fd_kernel, int fd_initrd, const char *kernel_cmdline)
 {
 	void *p;
 	int nr;
 
-	if (lseek(fd, 0, SEEK_SET) < 0)
+	/*
+	 * Some architectures may support loading an initrd alongside the flat kernel,
+	 * but we do not.
+	 */
+	if (fd_initrd != -1)
+		pr_warning("Loading initrd with flat binary not supported.");
+
+	if (lseek(fd_kernel, 0, SEEK_SET) < 0)
 		die_perror("lseek");
 
 	p = guest_real_to_host(kvm, BOOT_LOADER_SELECTOR, BOOT_LOADER_IP);
 
-	while ((nr = read(fd, p, 65536)) > 0)
+	while ((nr = read(fd_kernel, p, 65536)) > 0)
 		p += nr;
 
 	kvm->boot_selector	= BOOT_LOADER_SELECTOR;

  parent reply	other threads:[~2011-12-09  6:54 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1323413420.git.matt@ozlabs.org>
2011-12-09  6:52 ` [PATCH V2 01/23] kvm tools: Only build/init i8042 on x86 Matt Evans
2011-12-09  6:52 ` [PATCH V2 03/23] kvm tools: Re-arrange Makefile to heed CFLAGS before checking for optional libs Matt Evans
2011-12-09  6:53 ` [PATCH V2 02/23] kvm tools: Add Makefile parameter for kernel include path Matt Evans
2011-12-09  6:53 ` [PATCH V2 04/23] kvm tools: Get correct 64-bit types on PPC64 and link appropriately Matt Evans
2011-12-09  8:24   ` Sasha Levin
2011-12-09  8:29     ` Pekka Enberg
2011-12-12  1:03       ` Matt Evans
2011-12-12  5:57         ` Pekka Enberg
2011-12-13  6:44   ` Matt Evans
2011-12-09  6:53 ` [PATCH V2 05/23] kvm tools: Add arch-specific KVM_RUN exit handling via kvm_cpu__handle_exit() Matt Evans
2011-12-09  6:54 ` [PATCH V2 06/23] kvm tools: Don't die if KVM_CAP_NR_VCPUS isn't available Matt Evans
2011-12-09  6:54 ` [PATCH V2 07/23] kvm tools: Fix KVM_RUN exit code check Matt Evans
2011-12-09  6:54 ` [PATCH V2 08/23] kvm tools: Add kvm__arch_periodic_poll() Matt Evans
2011-12-09  6:54 ` [PATCH V2 09/23] kvm tools: Move arch-specific cmdline init into kvm__arch_set_cmdline() Matt Evans
2011-12-09  6:54 ` [PATCH V2 10/23] kvm tools: Add CONSOLE_HV term type and allow it to be selected Matt Evans
2011-12-09  6:54 ` [PATCH V2 11/23] kvm tools: Fix term_getc(), term_getc_iov() endian bugs Matt Evans
2011-12-09  6:54 ` [PATCH V2 12/23] kvm tools: Allow initrd_check() to match a cpio Matt Evans
2011-12-09  6:54 ` Matt Evans [this message]
2011-12-09  6:55 ` [PATCH V2 14/23] kvm tools: Initialise PCI before devices start getting registered with PCI Matt Evans
2011-12-09  6:55 ` [PATCH V2 15/23] kvm tools: Perform CPU and firmware setup after devices are added Matt Evans
2011-12-09  6:55 ` [PATCH V2 16/23] kvm tools: Init IRQs after determining nrcpus Matt Evans
2011-12-09  6:55 ` [PATCH V2 17/23] kvm tools: Add ability to map guest RAM from hugetlbfs Matt Evans
2011-12-09  7:39   ` Sasha Levin
2011-12-12  5:05     ` Matt Evans
2011-12-09  8:38   ` Pekka Enberg
2011-12-12  6:19     ` Matt Evans
2011-12-09  8:42   ` Pekka Enberg
2011-12-12  5:17     ` Matt Evans
2011-12-12  6:06       ` Pekka Enberg
2011-12-09  6:55 ` [PATCH V2 18/23] kvm tools: Move PCI_MAX_DEVICES to pci.h Matt Evans
2011-12-09  6:55 ` [PATCH V2 19/23] kvm tools: Endian-sanitise pci.h and PCI device setup Matt Evans
2011-12-09  6:55 ` [PATCH V2 20/23] kvm tools: Correctly set virtio-pci bar_size and remove hardwired address Matt Evans
2011-12-09  6:55 ` [PATCH V2 21/23] kvm tools: Add pci__config_{rd,wr}(), pci__find_dev() Matt Evans
2011-12-09  6:55 ` [PATCH V2 22/23] kvm tools: Arch-specific define for PCI MMIO allocation area Matt Evans
2011-12-09  6:56 ` [PATCH V2 23/23] kvm tools: Create arch-specific kvm_cpu__emulate_{mm}io() Matt Evans
2011-12-09  7:53   ` Sasha Levin
2011-12-12  1:08     ` Matt Evans

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EE1B0B3.6090909@ozlabs.org \
    --to=matt@ozlabs.org \
    --cc=asias.hejun@gmail.com \
    --cc=gorcunov@gmail.com \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=levinsasha928@gmail.com \
    --cc=penberg@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).