From: Matt Evans <matt@ozlabs.org>
To: kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Cc: penberg@kernel.org, asias.hejun@gmail.com,
levinsasha928@gmail.com, gorcunov@gmail.com
Subject: [PATCH V2 22/23] kvm tools: Arch-specific define for PCI MMIO allocation area
Date: Fri, 09 Dec 2011 17:55:54 +1100 [thread overview]
Message-ID: <4EE1B0FA.8090901@ozlabs.org> (raw)
In-Reply-To: <cover.1323413420.git.matt@ozlabs.org>
pci_get_io_space_block() used to grab addresses from
KVM_32BIT_GAP_START + 0x1000000, which is x86-specific. Create a new define,
KVM_PCI_MMIO_AREA, to specify a bus address these allocations can come from.
Signed-off-by: Matt Evans <matt@ozlabs.org>
---
tools/kvm/pci.c | 8 ++++++--
tools/kvm/x86/include/kvm/kvm-arch.h | 5 +++++
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/tools/kvm/pci.c b/tools/kvm/pci.c
index 95df169..59b2618 100644
--- a/tools/kvm/pci.c
+++ b/tools/kvm/pci.c
@@ -11,8 +11,12 @@ static struct pci_device_header *pci_devices[PCI_MAX_DEVICES];
static union pci_config_address pci_config_address;
-/* This is within our PCI gap - in an unused area */
-static u32 io_space_blocks = KVM_32BIT_GAP_START + 0x1000000;
+/* This is within our PCI gap - in an unused area.
+ * Note this is a PCI *bus address*, is used to assign BARs etc.!
+ * (That's why it can still 32bit even with 64bit guests-- 64bit
+ * PCI isn't currently supported.)
+ */
+static u32 io_space_blocks = KVM_PCI_MMIO_AREA;
u32 pci_get_io_space_block(u32 size)
{
diff --git a/tools/kvm/x86/include/kvm/kvm-arch.h b/tools/kvm/x86/include/kvm/kvm-arch.h
index 02aa8b9..686b1b8 100644
--- a/tools/kvm/x86/include/kvm/kvm-arch.h
+++ b/tools/kvm/x86/include/kvm/kvm-arch.h
@@ -18,6 +18,11 @@
#define KVM_MMIO_START KVM_32BIT_GAP_START
+/* This is the address that pci_get_io_space_block() starts allocating
+ * from. Note that this is a PCI bus address (though same on x86).
+ */
+#define KVM_PCI_MMIO_AREA (KVM_MMIO_START + 0x1000000)
+
struct kvm {
int sys_fd; /* For system ioctls(), i.e. /dev/kvm */
int vm_fd; /* For VM ioctls() */
next prev parent reply other threads:[~2011-12-09 6:55 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1323413420.git.matt@ozlabs.org>
2011-12-09 6:52 ` [PATCH V2 01/23] kvm tools: Only build/init i8042 on x86 Matt Evans
2011-12-09 6:52 ` [PATCH V2 03/23] kvm tools: Re-arrange Makefile to heed CFLAGS before checking for optional libs Matt Evans
2011-12-09 6:53 ` [PATCH V2 02/23] kvm tools: Add Makefile parameter for kernel include path Matt Evans
2011-12-09 6:53 ` [PATCH V2 04/23] kvm tools: Get correct 64-bit types on PPC64 and link appropriately Matt Evans
2011-12-09 8:24 ` Sasha Levin
2011-12-09 8:29 ` Pekka Enberg
2011-12-12 1:03 ` Matt Evans
2011-12-12 5:57 ` Pekka Enberg
2011-12-13 6:44 ` Matt Evans
2011-12-09 6:53 ` [PATCH V2 05/23] kvm tools: Add arch-specific KVM_RUN exit handling via kvm_cpu__handle_exit() Matt Evans
2011-12-09 6:54 ` [PATCH V2 06/23] kvm tools: Don't die if KVM_CAP_NR_VCPUS isn't available Matt Evans
2011-12-09 6:54 ` [PATCH V2 07/23] kvm tools: Fix KVM_RUN exit code check Matt Evans
2011-12-09 6:54 ` [PATCH V2 08/23] kvm tools: Add kvm__arch_periodic_poll() Matt Evans
2011-12-09 6:54 ` [PATCH V2 09/23] kvm tools: Move arch-specific cmdline init into kvm__arch_set_cmdline() Matt Evans
2011-12-09 6:54 ` [PATCH V2 10/23] kvm tools: Add CONSOLE_HV term type and allow it to be selected Matt Evans
2011-12-09 6:54 ` [PATCH V2 11/23] kvm tools: Fix term_getc(), term_getc_iov() endian bugs Matt Evans
2011-12-09 6:54 ` [PATCH V2 12/23] kvm tools: Allow initrd_check() to match a cpio Matt Evans
2011-12-09 6:54 ` [PATCH V2 13/23] kvm tools: Allow load_flat_binary() to load an initrd alongside Matt Evans
2011-12-09 6:55 ` [PATCH V2 14/23] kvm tools: Initialise PCI before devices start getting registered with PCI Matt Evans
2011-12-09 6:55 ` [PATCH V2 15/23] kvm tools: Perform CPU and firmware setup after devices are added Matt Evans
2011-12-09 6:55 ` [PATCH V2 16/23] kvm tools: Init IRQs after determining nrcpus Matt Evans
2011-12-09 6:55 ` [PATCH V2 17/23] kvm tools: Add ability to map guest RAM from hugetlbfs Matt Evans
2011-12-09 7:39 ` Sasha Levin
2011-12-12 5:05 ` Matt Evans
2011-12-09 8:38 ` Pekka Enberg
2011-12-12 6:19 ` Matt Evans
2011-12-09 8:42 ` Pekka Enberg
2011-12-12 5:17 ` Matt Evans
2011-12-12 6:06 ` Pekka Enberg
2011-12-09 6:55 ` [PATCH V2 18/23] kvm tools: Move PCI_MAX_DEVICES to pci.h Matt Evans
2011-12-09 6:55 ` [PATCH V2 19/23] kvm tools: Endian-sanitise pci.h and PCI device setup Matt Evans
2011-12-09 6:55 ` [PATCH V2 20/23] kvm tools: Correctly set virtio-pci bar_size and remove hardwired address Matt Evans
2011-12-09 6:55 ` [PATCH V2 21/23] kvm tools: Add pci__config_{rd,wr}(), pci__find_dev() Matt Evans
2011-12-09 6:55 ` Matt Evans [this message]
2011-12-09 6:56 ` [PATCH V2 23/23] kvm tools: Create arch-specific kvm_cpu__emulate_{mm}io() Matt Evans
2011-12-09 7:53 ` Sasha Levin
2011-12-12 1:08 ` Matt Evans
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE1B0FA.8090901@ozlabs.org \
--to=matt@ozlabs.org \
--cc=asias.hejun@gmail.com \
--cc=gorcunov@gmail.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=levinsasha928@gmail.com \
--cc=penberg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).