[PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Avi Kivity]

Using RCU for lockless shadow walking can increase the amount of memory
in use by the system, since RCU grace periods are unpredictable.  We also
have an unconditional write to a shared variable (reader_counter), which
isn't good for scaling.

Replace that with a scheme similar to x86's get_user_pages_fast(): disable
interrupts during lockless shadow walk to force the freer
(kvm_mmu_commit_zap_page()) to wait for the TLB flush IPI to find the
processor with interrupts enabled.

We also add a new vcpu->mode, READING_SHADOW_PAGE_TABLES, to prevent
kvm_flush_remote_tlbs() from avoiding the IPI.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |    4 ---
 arch/x86/kvm/mmu.c              |   72 +++++++++++++++------------------------
 include/linux/kvm_host.h        |    3 +-
 3 files changed, 30 insertions(+), 49 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index f624ca7..67e66e6 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -237,8 +237,6 @@ struct kvm_mmu_page {
 #endif
 
 	int write_flooding_count;
-
-	struct rcu_head rcu;
 };
 
 struct kvm_pio_request {
@@ -536,8 +534,6 @@ struct kvm_arch {
 	u64 hv_guest_os_id;
 	u64 hv_hypercall;
 
-	atomic_t reader_counter;
-
 	#ifdef CONFIG_KVM_MMU_AUDIT
 	int audit_point;
 	#endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 07424cf..ef88034 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -551,19 +551,28 @@ static u64 mmu_spte_get_lockless(u64 *sptep)
 
 static void walk_shadow_page_lockless_begin(struct kvm_vcpu *vcpu)
 {
-	rcu_read_lock();
-	atomic_inc(&vcpu->kvm->arch.reader_counter);
-
-	/* Increase the counter before walking shadow page table */
-	smp_mb__after_atomic_inc();
+	/*
+	 * Prevent page table teardown by making any free-er wait during
+	 * kvm_flush_remote_tlbs() IPI to all active vcpus.
+	 */
+	local_irq_disable();
+	vcpu->mode = READING_SHADOW_PAGE_TABLES;
+	/*
+	 * wmb: advertise vcpu->mode change
+	 * rmb: make sure we see updated sptes
+	 */
+	smp_mb();
 }
 
 static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
 {
-	/* Decrease the counter after walking shadow page table finished */
-	smp_mb__before_atomic_dec();
-	atomic_dec(&vcpu->kvm->arch.reader_counter);
-	rcu_read_unlock();
+	/*
+	 * Make our reads and writes to shadow page tables globally visible
+	 * before leaving READING_SHADOW_PAGE_TABLES mode.
+	 */
+	smp_mb();
+	vcpu->mode = OUTSIDE_GUEST_MODE;
+	local_irq_enable();
 }
 
 static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
@@ -1989,30 +1998,6 @@ static int kvm_mmu_prepare_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp,
 	return ret;
 }
 
-static void kvm_mmu_isolate_pages(struct list_head *invalid_list)
-{
-	struct kvm_mmu_page *sp;
-
-	list_for_each_entry(sp, invalid_list, link)
-		kvm_mmu_isolate_page(sp);
-}
-
-static void free_pages_rcu(struct rcu_head *head)
-{
-	struct kvm_mmu_page *next, *sp;
-
-	sp = container_of(head, struct kvm_mmu_page, rcu);
-	while (sp) {
-		if (!list_empty(&sp->link))
-			next = list_first_entry(&sp->link,
-				      struct kvm_mmu_page, link);
-		else
-			next = NULL;
-		kvm_mmu_free_page(sp);
-		sp = next;
-	}
-}
-
 static void kvm_mmu_commit_zap_page(struct kvm *kvm,
 				    struct list_head *invalid_list)
 {
@@ -2021,17 +2006,17 @@ static void kvm_mmu_commit_zap_page(struct kvm *kvm,
 	if (list_empty(invalid_list))
 		return;
 
-	kvm_flush_remote_tlbs(kvm);
-
-	if (atomic_read(&kvm->arch.reader_counter)) {
-		kvm_mmu_isolate_pages(invalid_list);
-		sp = list_first_entry(invalid_list, struct kvm_mmu_page, link);
-		list_del_init(invalid_list);
+	/*
+	 * wmb: make sure everyone sees our modifications to the page tables
+	 * rmb: make sure we see changes to vcpu->mode
+	 */
+	smp_mb();
 
-		trace_kvm_mmu_delay_free_pages(sp);
-		call_rcu(&sp->rcu, free_pages_rcu);
-		return;
-	}
+	/*
+	 * Wait for all vcpus to exit guest mode and/or lockless shadow
+	 * page table walks.
+	 */
+	kvm_flush_remote_tlbs(kvm);
 
 	do {
 		sp = list_first_entry(invalid_list, struct kvm_mmu_page, link);
@@ -2039,7 +2024,6 @@ static void kvm_mmu_commit_zap_page(struct kvm *kvm,
 		kvm_mmu_isolate_page(sp);
 		kvm_mmu_free_page(sp);
 	} while (!list_empty(invalid_list));
-
 }
 
 /*
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 186ffab..d1f1adf 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -128,7 +128,8 @@ int kvm_async_pf_wakeup_all(struct kvm_vcpu *vcpu);
 enum {
 	OUTSIDE_GUEST_MODE,
 	IN_GUEST_MODE,
-	EXITING_GUEST_MODE
+	EXITING_GUEST_MODE,
+	READING_SHADOW_PAGE_TABLES,
 };
 
 /*
-- 
1.7.10

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Xiao Guangrong]

On 04/24/2012 05:47 PM, Avi Kivity wrote:


>  static void kvm_mmu_commit_zap_page(struct kvm *kvm,
>  				    struct list_head *invalid_list)
>  {
> @@ -2021,17 +2006,17 @@ static void kvm_mmu_commit_zap_page(struct kvm *kvm,
>  	if (list_empty(invalid_list))
>  		return;
> 
> -	kvm_flush_remote_tlbs(kvm);
> -
> -	if (atomic_read(&kvm->arch.reader_counter)) {
> -		kvm_mmu_isolate_pages(invalid_list);
> -		sp = list_first_entry(invalid_list, struct kvm_mmu_page, link);
> -		list_del_init(invalid_list);
> +	/*
> +	 * wmb: make sure everyone sees our modifications to the page tables


Other lockless vcpu can see a old-copy of a spte, but it is ok since all page
tables is valid to be used. (kvm_flush_remote_tlbs can stop page table to be
freed)

> +	 * rmb: make sure we see changes to vcpu->mode


It is the responsibility of kvm_flush_remote_tlbs to see changes to vcpu->mode.
No?

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Avi Kivity]

On 04/24/2012 01:13 PM, Xiao Guangrong wrote:
> On 04/24/2012 05:47 PM, Avi Kivity wrote:
>
>
> >  static void kvm_mmu_commit_zap_page(struct kvm *kvm,
> >  				    struct list_head *invalid_list)
> >  {
> > @@ -2021,17 +2006,17 @@ static void kvm_mmu_commit_zap_page(struct kvm *kvm,
> >  	if (list_empty(invalid_list))
> >  		return;
> > 
> > -	kvm_flush_remote_tlbs(kvm);
> > -
> > -	if (atomic_read(&kvm->arch.reader_counter)) {
> > -		kvm_mmu_isolate_pages(invalid_list);
> > -		sp = list_first_entry(invalid_list, struct kvm_mmu_page, link);
> > -		list_del_init(invalid_list);
> > +	/*
> > +	 * wmb: make sure everyone sees our modifications to the page tables
>
>
> Other lockless vcpu can see a old-copy of a spte, but it is ok since all page
> tables is valid to be used. (kvm_flush_remote_tlbs can stop page table to be
> freed)

We want kvm_commit_zap_page() to see the changes before freeing memory. 
But maybe it's the responsibility of kmem_cache_free()/kmem_cache_alloc().

> > +	 * rmb: make sure we see changes to vcpu->mode
>
>
> It is the responsibility of kvm_flush_remote_tlbs to see changes to vcpu->mode.
> No?

Yes.

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Marcelo Tosatti]

On Tue, Apr 24, 2012 at 12:47:25PM +0300, Avi Kivity wrote:
> Using RCU for lockless shadow walking can increase the amount of memory
> in use by the system, since RCU grace periods are unpredictable.  We also
> have an unconditional write to a shared variable (reader_counter), which
> isn't good for scaling.
> 
> Replace that with a scheme similar to x86's get_user_pages_fast(): disable
> interrupts during lockless shadow walk to force the freer
> (kvm_mmu_commit_zap_page()) to wait for the TLB flush IPI to find the
> processor with interrupts enabled.
> 
> We also add a new vcpu->mode, READING_SHADOW_PAGE_TABLES, to prevent
> kvm_flush_remote_tlbs() from avoiding the IPI.
> 
> Signed-off-by: Avi Kivity <avi@redhat.com>
> ---
>  arch/x86/include/asm/kvm_host.h |    4 ---
>  arch/x86/kvm/mmu.c              |   72 +++++++++++++++------------------------
>  include/linux/kvm_host.h        |    3 +-
>  3 files changed, 30 insertions(+), 49 deletions(-)
> 
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index f624ca7..67e66e6 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -237,8 +237,6 @@ struct kvm_mmu_page {
>  #endif
>  
>  	int write_flooding_count;
> -
> -	struct rcu_head rcu;
>  };
>  
>  struct kvm_pio_request {
> @@ -536,8 +534,6 @@ struct kvm_arch {
>  	u64 hv_guest_os_id;
>  	u64 hv_hypercall;
>  
> -	atomic_t reader_counter;
> -
>  	#ifdef CONFIG_KVM_MMU_AUDIT
>  	int audit_point;
>  	#endif
> diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
> index 07424cf..ef88034 100644
> --- a/arch/x86/kvm/mmu.c
> +++ b/arch/x86/kvm/mmu.c
> @@ -551,19 +551,28 @@ static u64 mmu_spte_get_lockless(u64 *sptep)
>  
>  static void walk_shadow_page_lockless_begin(struct kvm_vcpu *vcpu)
>  {
> -	rcu_read_lock();
> -	atomic_inc(&vcpu->kvm->arch.reader_counter);
> -
> -	/* Increase the counter before walking shadow page table */
> -	smp_mb__after_atomic_inc();
> +	/*
> +	 * Prevent page table teardown by making any free-er wait during
> +	 * kvm_flush_remote_tlbs() IPI to all active vcpus.
> +	 */
> +	local_irq_disable();
> +	vcpu->mode = READING_SHADOW_PAGE_TABLES;
> +	/*
> +	 * wmb: advertise vcpu->mode change
> +	 * rmb: make sure we see updated sptes
> +	 */
> +	smp_mb();
>  }
>  
>  static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
>  {
> -	/* Decrease the counter after walking shadow page table finished */
> -	smp_mb__before_atomic_dec();
> -	atomic_dec(&vcpu->kvm->arch.reader_counter);
> -	rcu_read_unlock();
> +	/*
> +	 * Make our reads and writes to shadow page tables globally visible
> +	 * before leaving READING_SHADOW_PAGE_TABLES mode.
> +	 */

This comment is misleading. Writes to shadow page tables must be
performed with locked instructions outside the mmu_lock.

> +	smp_mb();
> +	vcpu->mode = OUTSIDE_GUEST_MODE;

Don't you want 

vcpu->mode = OUTSIDE_GUEST_MODE;
smp_mb();

So that vcpu->mode update is globally visible before subsequent loads
execute?

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Xiao Guangrong]

On 04/27/2012 06:00 AM, Marcelo Tosatti wrote:


>>  static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
>>  {
>> -	/* Decrease the counter after walking shadow page table finished */
>> -	smp_mb__before_atomic_dec();
>> -	atomic_dec(&vcpu->kvm->arch.reader_counter);
>> -	rcu_read_unlock();
>> +	/*
>> +	 * Make our reads and writes to shadow page tables globally visible
>> +	 * before leaving READING_SHADOW_PAGE_TABLES mode.
>> +	 */
> 
> This comment is misleading. Writes to shadow page tables must be
> performed with locked instructions outside the mmu_lock.
> 


You mean that the write should guarantee a correct memory order by itself?

>> +	smp_mb();
>> +	vcpu->mode = OUTSIDE_GUEST_MODE;
> 
> Don't you want 
> 
> vcpu->mode = OUTSIDE_GUEST_MODE;
> smp_mb();
> 


It is unsafe i think, it is a problem if spte read / spte update is ordered
to the behind of vcpu->mode = OUTSIDE_GUEST_MODE, like below:

VCPU 0                                  VCPU 1
                                   commit_zapped_page:
/*
 * setting vcpu->mode is reordered
 * to the head of read spte.
 */
vcpu->mode = OUTSIDE_GUEST_MODE;

                                   see VCPU 0 is out-of-guest-mode, IPI is
                                   not sent, and the sp is free immediately.

read spte;
 OOPS!!!

(It is invalid since spte is freed.)

smp_mb

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Marcelo Tosatti]

On Fri, Apr 27, 2012 at 02:07:57PM +0800, Xiao Guangrong wrote:
> On 04/27/2012 06:00 AM, Marcelo Tosatti wrote:
> 
> 
> >>  static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
> >>  {
> >> -	/* Decrease the counter after walking shadow page table finished */
> >> -	smp_mb__before_atomic_dec();
> >> -	atomic_dec(&vcpu->kvm->arch.reader_counter);
> >> -	rcu_read_unlock();
> >> +	/*
> >> +	 * Make our reads and writes to shadow page tables globally visible
> >> +	 * before leaving READING_SHADOW_PAGE_TABLES mode.
> >> +	 */
> > 
> > This comment is misleading. Writes to shadow page tables must be
> > performed with locked instructions outside the mmu_lock.
> > 
> 
> 
> You mean that the write should guarantee a correct memory order by itself?

Yes.

> >> +	smp_mb();
> >> +	vcpu->mode = OUTSIDE_GUEST_MODE;
> > 
> > Don't you want 
> > 
> > vcpu->mode = OUTSIDE_GUEST_MODE;
> > smp_mb();
> > 
> 
> 
> It is unsafe i think, it is a problem if spte read / spte update is ordered
> to the behind of vcpu->mode = OUTSIDE_GUEST_MODE, like below:
> 
> VCPU 0                                  VCPU 1
>                                    commit_zapped_page:
> /*
>  * setting vcpu->mode is reordered
>  * to the head of read spte.
>  */
> vcpu->mode = OUTSIDE_GUEST_MODE;
> 
>                                    see VCPU 0 is out-of-guest-mode, IPI is
>                                    not sent, and the sp is free immediately.
> 
> read spte;
>  OOPS!!!
> 
> (It is invalid since spte is freed.)
> 
> smp_mb

Right. In that case a compiler barrier is sufficient (stores are not 
reordered with earlier loads on x86).

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Avi Kivity]

On 04/28/2012 12:49 AM, Marcelo Tosatti wrote:
> > >> +	smp_mb();
> > >> +	vcpu->mode = OUTSIDE_GUEST_MODE;
> > > 
> > > Don't you want 
> > > 
> > > vcpu->mode = OUTSIDE_GUEST_MODE;
> > > smp_mb();
> > > 
> > 
> > 
> > It is unsafe i think, it is a problem if spte read / spte update is ordered
> > to the behind of vcpu->mode = OUTSIDE_GUEST_MODE, like below:
> > 
> > VCPU 0                                  VCPU 1
> >                                    commit_zapped_page:
> > /*
> >  * setting vcpu->mode is reordered
> >  * to the head of read spte.
> >  */
> > vcpu->mode = OUTSIDE_GUEST_MODE;
> > 
> >                                    see VCPU 0 is out-of-guest-mode, IPI is
> >                                    not sent, and the sp is free immediately.
> > 
> > read spte;
> >  OOPS!!!

Ouch!

> > 
> > (It is invalid since spte is freed.)
> > 
> > smp_mb
>
> Right. In that case a compiler barrier is sufficient (stores are not 
> reordered with earlier loads on x86).

I think it's customary not to depend on arch specific memory barrier
behaviour (but I don't have anything to base this on, just a feeling).

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH v2] KVM: MMU: Don't use RCU for lockless shadow walking

[Avi Kivity]

On 04/27/2012 01:00 AM, Marcelo Tosatti wrote:
> >  
> >  static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
> >  {
> > -	/* Decrease the counter after walking shadow page table finished */
> > -	smp_mb__before_atomic_dec();
> > -	atomic_dec(&vcpu->kvm->arch.reader_counter);
> > -	rcu_read_unlock();
> > +	/*
> > +	 * Make our reads and writes to shadow page tables globally visible
> > +	 * before leaving READING_SHADOW_PAGE_TABLES mode.
> > +	 */
>
> This comment is misleading. Writes to shadow page tables must be
> performed with locked instructions outside the mmu_lock.

You are correct with respect to writes.  I guess reads are immaterial
because they will be either protected by a write, or discarded.


-- 
error compiling committee.c: too many arguments to function