From: Paolo Bonzini <pbonzini@redhat.com>
To: Vadim Rozenfeld <vrozenfe@redhat.com>
Cc: kvm@vger.kernel.org, gleb@redhat.com, mtosatti@redhat.com, pl@dlh.net
Subject: Re: [RFC PATCH v2 1/2] add support for Hyper-V reference time counter
Date: Sun, 19 May 2013 16:37:07 +0200 [thread overview]
Message-ID: <5198E393.3050703@redhat.com> (raw)
In-Reply-To: <1368947197-9033-2-git-send-email-vrozenfe@redhat.com>
Il 19/05/2013 09:06, Vadim Rozenfeld ha scritto:
> Signed-off: Peter Lieven <pl@dlh.net>
> Signed-off: Gleb Natapov <gleb@redhat.com>
> Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>
>
> v1 -> v2
> 1. mark TSC page dirty as suggested by
> Eric Northup <digitaleric@google.com> and Gleb
> 2. disable local irq when calling get_kernel_ns,
> as it was done by Peter Lieven <pl@dlhnet.de>
> 3. move check for TSC page enable from second patch
> to this one.
>
> ---
> arch/x86/include/asm/kvm_host.h | 2 ++
> arch/x86/include/uapi/asm/hyperv.h | 14 ++++++++++++++
> arch/x86/kvm/x86.c | 39 +++++++++++++++++++++++++++++++++++++-
> include/uapi/linux/kvm.h | 1 +
> 4 files changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 3741c65..f0fee35 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -575,6 +575,8 @@ struct kvm_arch {
> /* fields used by HYPER-V emulation */
> u64 hv_guest_os_id;
> u64 hv_hypercall;
> + u64 hv_ref_count;
> + u64 hv_tsc_page;
>
> #ifdef CONFIG_KVM_MMU_AUDIT
> int audit_point;
> diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
> index b80420b..890dfc3 100644
> --- a/arch/x86/include/uapi/asm/hyperv.h
> +++ b/arch/x86/include/uapi/asm/hyperv.h
> @@ -136,6 +136,9 @@
> /* MSR used to read the per-partition time reference counter */
> #define HV_X64_MSR_TIME_REF_COUNT 0x40000020
>
> +/* A partition's reference time stamp counter (TSC) page */
> +#define HV_X64_MSR_REFERENCE_TSC 0x40000021
> +
> /* Define the virtual APIC registers */
> #define HV_X64_MSR_EOI 0x40000070
> #define HV_X64_MSR_ICR 0x40000071
> @@ -179,6 +182,9 @@
> #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
> (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
>
> +#define HV_X64_MSR_TSC_REFERENCE_ENABLE 0x00000001
> +#define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT 12
> +
> #define HV_PROCESSOR_POWER_STATE_C0 0
> #define HV_PROCESSOR_POWER_STATE_C1 1
> #define HV_PROCESSOR_POWER_STATE_C2 2
> @@ -191,4 +197,12 @@
> #define HV_STATUS_INVALID_ALIGNMENT 4
> #define HV_STATUS_INSUFFICIENT_BUFFERS 19
>
> +typedef struct _HV_REFERENCE_TSC_PAGE {
> + __u32 TscSequence;
> + __u32 Rserved1;
> + __u64 TscScale;
> + __s64 TscOffset;
> +} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
> +
> +
> #endif
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 8d28810..9645dab 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -843,7 +843,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
> static u32 msrs_to_save[] = {
> MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
> MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
> - HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
> + HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL, HV_X64_MSR_TIME_REF_COUNT,
> HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
> MSR_KVM_PV_EOI_EN,
> MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> @@ -1788,6 +1788,8 @@ static bool kvm_hv_msr_partition_wide(u32 msr)
> switch (msr) {
> case HV_X64_MSR_GUEST_OS_ID:
> case HV_X64_MSR_HYPERCALL:
> + case HV_X64_MSR_REFERENCE_TSC:
> + case HV_X64_MSR_TIME_REF_COUNT:
> r = true;
> break;
> }
> @@ -1827,6 +1829,29 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
> if (__copy_to_user((void __user *)addr, instructions, 4))
> return 1;
> kvm->arch.hv_hypercall = data;
> + local_irq_disable();
> + kvm->arch.hv_ref_count = get_kernel_ns();
> + local_irq_enable();
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC: {
> + u64 gfn;
> + unsigned long addr;
> + HV_REFERENCE_TSC_PAGE tsc_ref;
> + tsc_ref.TscSequence = 0;
Again, please explain why this is not 0xFFFFFFFF.
Paolo
> + if (!(data & HV_X64_MSR_TSC_REFERENCE_ENABLE)) {
> + kvm->arch.hv_tsc_page = data;
> + break;
> + }
> + gfn = data >> HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT;
> + addr = gfn_to_hva(kvm, data >>
> + HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT);
> + if (kvm_is_error_hva(addr))
> + return 1;
> + if (__copy_to_user((void __user *)addr, &tsc_ref, sizeof(tsc_ref)))
> + return 1;
> + mark_page_dirty(kvm, gfn);
> + kvm->arch.hv_tsc_page = data;
> break;
> }
> default:
> @@ -2253,6 +2278,17 @@ static int get_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
> case HV_X64_MSR_HYPERCALL:
> data = kvm->arch.hv_hypercall;
> break;
> + case HV_X64_MSR_TIME_REF_COUNT: {
> + u64 now_ns;
> + local_irq_disable();
> + now_ns = get_kernel_ns() + kvm->arch.kvmclock_offset;
> + data = div_u64(now_ns - kvm->arch.hv_ref_count, 100);
> + local_irq_enable();
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC:
> + data = kvm->arch.hv_tsc_page;
> + break;
> default:
> vcpu_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
> return 1;
> @@ -2566,6 +2602,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> case KVM_CAP_ASSIGN_DEV_IRQ:
> case KVM_CAP_PCI_2_3:
> #endif
> + case KVM_CAP_HYPERV_TIME:
> r = 1;
> break;
> case KVM_CAP_COALESCED_MMIO:
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index a5c86fc..0810763 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -666,6 +666,7 @@ struct kvm_ppc_smmu_info {
> #define KVM_CAP_IRQ_MPIC 90
> #define KVM_CAP_PPC_RTAS 91
> #define KVM_CAP_IRQ_XICS 92
> +#define KVM_CAP_HYPERV_TIME 93
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
>
next prev parent reply other threads:[~2013-05-19 14:37 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-19 7:06 [RFC PATCH v2 0/2] Hyper-V timers Vadim Rozenfeld
2013-05-19 7:06 ` [RFC PATCH v2 1/2] add support for Hyper-V reference time counter Vadim Rozenfeld
2013-05-19 13:47 ` Gleb Natapov
2013-05-19 14:37 ` Paolo Bonzini [this message]
2013-05-22 0:46 ` Marcelo Tosatti
2013-05-22 3:28 ` Gleb Natapov
2013-05-22 3:32 ` Marcelo Tosatti
2013-05-22 3:38 ` Gleb Natapov
2013-05-22 14:31 ` Marcelo Tosatti
2013-05-22 7:32 ` Vadim Rozenfeld
2013-05-22 21:55 ` Paolo Bonzini
2013-05-23 6:17 ` Peter Lieven
2013-05-23 9:54 ` Paolo Bonzini
2013-05-23 10:45 ` Peter Lieven
2013-05-23 12:25 ` Vadim Rozenfeld
2013-05-23 13:18 ` Paolo Bonzini
2013-05-23 13:20 ` Peter Lieven
2013-05-23 13:23 ` Paolo Bonzini
2013-05-23 13:30 ` Peter Lieven
2013-05-23 13:40 ` Paolo Bonzini
2013-05-19 7:06 ` [RFC PATCH v2 2/2] add support for Hyper-V invariant TSC Vadim Rozenfeld
2013-05-22 0:50 ` Marcelo Tosatti
2013-05-22 7:22 ` Vadim Rozenfeld
2013-05-22 21:23 ` Marcelo Tosatti
2013-05-23 6:18 ` Peter Lieven
2013-05-23 9:13 ` Gleb Natapov
2013-05-23 13:35 ` Marcelo Tosatti
2013-05-23 15:14 ` Gleb Natapov
2013-05-24 9:57 ` Vadim Rozenfeld
2013-05-23 12:33 ` Vadim Rozenfeld
2013-05-23 12:44 ` Peter Lieven
2013-05-23 12:45 ` Gleb Natapov
2013-05-23 12:54 ` Vadim Rozenfeld
2013-05-23 9:12 ` Gleb Natapov
2013-05-23 13:53 ` Marcelo Tosatti
2013-05-23 15:31 ` Gleb Natapov
2013-05-24 10:11 ` Vadim Rozenfeld
2013-05-24 19:41 ` Marcelo Tosatti
2013-05-27 12:33 ` Vadim Rozenfeld
2013-05-23 12:21 ` Vadim Rozenfeld
2013-05-23 13:47 ` Marcelo Tosatti
2013-05-24 10:01 ` Vadim Rozenfeld
2013-05-23 16:44 ` Paolo Bonzini
2013-05-24 10:16 ` Vadim Rozenfeld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5198E393.3050703@redhat.com \
--to=pbonzini@redhat.com \
--cc=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pl@dlh.net \
--cc=vrozenfe@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox