From: Paolo Bonzini <pbonzini@redhat.com>
To: Vadim Rozenfeld <vrozenfe@redhat.com>
Cc: kvm@vger.kernel.org, mtosatti@redhat.com, pl@dlhnet.de
Subject: Re: [RFC PATCH v3 1/2] add support for Hyper-V reference time counter
Date: Mon, 09 Dec 2013 15:23:55 +0100 [thread overview]
Message-ID: <52A5D27B.7080408@redhat.com> (raw)
In-Reply-To: <1386502419-26614-2-git-send-email-vrozenfe@redhat.com>
Il 08/12/2013 12:33, Vadim Rozenfeld ha scritto:
> Signed-off: Peter Lieven <pl@dlh.net>
> Signed-off: Gleb Natapov <gleb@redhat.com>
> Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>
>
> v1 -> v2
> 1. mark TSC page dirty as suggested by
> Eric Northup <digitaleric@google.com> and Gleb
> 2. disable local irq when calling get_kernel_ns,
> as it was done by Peter Lieven <pl@dlhnet.de>
> 3. move check for TSC page enable from second patch
> to this one.
>
> ---
> arch/x86/include/asm/kvm_host.h | 2 ++
> arch/x86/include/uapi/asm/hyperv.h | 13 +++++++++++++
> arch/x86/kvm/x86.c | 39 +++++++++++++++++++++++++++++++++++++-
> include/uapi/linux/kvm.h | 1 +
> 4 files changed, 54 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index ae5d783..2fd0753 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -605,6 +605,8 @@ struct kvm_arch {
> /* fields used by HYPER-V emulation */
> u64 hv_guest_os_id;
> u64 hv_hypercall;
> + u64 hv_ref_count;
> + u64 hv_tsc_page;
>
> #ifdef CONFIG_KVM_MMU_AUDIT
> int audit_point;
> diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
> index b8f1c01..462efe7 100644
> --- a/arch/x86/include/uapi/asm/hyperv.h
> +++ b/arch/x86/include/uapi/asm/hyperv.h
> @@ -28,6 +28,9 @@
> /* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
> #define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
>
> +/* A partition's reference time stamp counter (TSC) page */
> +#define HV_X64_MSR_REFERENCE_TSC 0x40000021
> +
> /*
> * There is a single feature flag that signifies the presence of the MSR
> * that can be used to retrieve both the local APIC Timer frequency as
> @@ -198,6 +201,9 @@
> #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
> (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
>
> +#define HV_X64_MSR_TSC_REFERENCE_ENABLE 0x00000001
> +#define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT 12
> +
> #define HV_PROCESSOR_POWER_STATE_C0 0
> #define HV_PROCESSOR_POWER_STATE_C1 1
> #define HV_PROCESSOR_POWER_STATE_C2 2
> @@ -210,4 +216,11 @@
> #define HV_STATUS_INVALID_ALIGNMENT 4
> #define HV_STATUS_INSUFFICIENT_BUFFERS 19
>
> +typedef struct _HV_REFERENCE_TSC_PAGE {
> + __u32 tsc_sequence;
> + __u32 res1;
> + __u64 tsc_scale;
> + __s64 tsc_offset;
> +} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
> +
> #endif
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 21ef1ba..5e4e495a 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -840,7 +840,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
> static u32 msrs_to_save[] = {
> MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
> MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
> - HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
> + HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL, HV_X64_MSR_TIME_REF_COUNT,
You need to bump KVM_SAVE_MSRS_BEGIN.
> HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
> MSR_KVM_PV_EOI_EN,
> MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> @@ -1826,6 +1826,8 @@ static bool kvm_hv_msr_partition_wide(u32 msr)
> switch (msr) {
> case HV_X64_MSR_GUEST_OS_ID:
> case HV_X64_MSR_HYPERCALL:
> + case HV_X64_MSR_REFERENCE_TSC:
> + case HV_X64_MSR_TIME_REF_COUNT:
> r = true;
> break;
> }
> @@ -1865,6 +1867,29 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
> if (__copy_to_user((void __user *)addr, instructions, 4))
> return 1;
> kvm->arch.hv_hypercall = data;
> + local_irq_disable();
> + kvm->arch.hv_ref_count = get_kernel_ns() + kvm->arch.kvmclock_offset;
> + local_irq_enable();
Please add a patch that moves these four lines from KVM_GET_CLOCK and
KVM_SET_CLOCK
local_irq_disable();
now_ns = get_kernel_ns();
delta = user_ns.clock - now_ns;
local_irq_enable();
kvm->arch.kvmclock_offset = delta;
kvm_gen_update_masterclock(kvm);
local_irq_disable();
now_ns = get_kernel_ns();
user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
local_irq_enable();
For example u64 kvm_get_clock_ns(struct kvm *) and void
kvm_set_clock_ns(struct kvm *, u64). You can then use the
kvm_get_clock_ns function in this patch.
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC: {
> + u64 gfn;
> + unsigned long addr;
> + HV_REFERENCE_TSC_PAGE tsc_ref;
> + tsc_ref.tsc_sequence = 0;
Please zero it with memset. You're leaking values from the stack to the
guest.
> + if (!(data & HV_X64_MSR_TSC_REFERENCE_ENABLE)) {
> + kvm->arch.hv_tsc_page = data;
> + break;
> + }
> + gfn = data >> HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT;
> + addr = gfn_to_hva(kvm, data >>
> + HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT);
> + if (kvm_is_error_hva(addr))
> + return 1;
> + if (__copy_to_user((void __user *)addr, &tsc_ref, sizeof(tsc_ref)))
> + return 1;
> + mark_page_dirty(kvm, gfn);
> + kvm->arch.hv_tsc_page = data;
> break;
> }
> default:
> @@ -2291,6 +2316,17 @@ static int get_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
> case HV_X64_MSR_HYPERCALL:
> data = kvm->arch.hv_hypercall;
> break;
> + case HV_X64_MSR_TIME_REF_COUNT: {
> + u64 now_ns;
> + local_irq_disable();
> + now_ns = get_kernel_ns() + kvm->arch.kvmclock_offset;
> + data = div_u64(now_ns - kvm->arch.hv_ref_count, 100);
> + local_irq_enable();
Another possible user of kvm_get_clock_ns.
The patch should be good with these changes.
Paolo
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC:
> + data = kvm->arch.hv_tsc_page;
> + break;
> default:
> vcpu_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
> return 1;
> @@ -2605,6 +2641,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> case KVM_CAP_ASSIGN_DEV_IRQ:
> case KVM_CAP_PCI_2_3:
> #endif
> + case KVM_CAP_HYPERV_TIME:
> r = 1;
> break;
> case KVM_CAP_COALESCED_MMIO:
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 902f124..686c1ca 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -674,6 +674,7 @@ struct kvm_ppc_smmu_info {
> #define KVM_CAP_ARM_EL1_32BIT 93
> #define KVM_CAP_SPAPR_MULTITCE 94
> #define KVM_CAP_EXT_EMUL_CPUID 95
> +#define KVM_CAP_HYPERV_TIME 96
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
>
next prev parent reply other threads:[~2013-12-09 14:24 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-08 11:33 [RFC PATCH v3 0/2] Hyper-V timers Vadim Rozenfeld
2013-12-08 11:33 ` [RFC PATCH v3 1/2] add support for Hyper-V reference time counter Vadim Rozenfeld
2013-12-09 14:23 ` Paolo Bonzini [this message]
2013-12-10 10:46 ` Vadim Rozenfeld
2013-12-11 18:53 ` Marcelo Tosatti
2013-12-11 18:59 ` Marcelo Tosatti
2013-12-12 9:33 ` Paolo Bonzini
2014-01-02 16:52 ` Peter Lieven
2014-01-07 9:36 ` Vadim Rozenfeld
2014-01-07 17:52 ` Peter Lieven
2014-01-08 9:40 ` Vadim Rozenfeld
2014-01-08 10:15 ` Peter Lieven
2014-01-08 10:44 ` Vadim Rozenfeld
2014-01-08 11:48 ` Peter Lieven
2014-01-08 12:12 ` Vadim Rozenfeld
2014-01-08 14:54 ` Peter Lieven
2014-01-08 20:08 ` Vadim Rozenfeld
2014-01-08 22:20 ` Peter Lieven
2014-01-09 11:10 ` Vadim Rozenfeld
2014-01-12 12:08 ` Vadim Rozenfeld
2014-01-12 20:35 ` Peter Lieven
2014-01-02 13:15 ` Peter Lieven
2014-01-02 13:57 ` Marcelo Tosatti
2014-01-02 16:08 ` Peter Lieven
2014-01-02 20:05 ` Marcelo Tosatti
2014-01-13 12:10 ` Vadim Rozenfeld
2013-12-08 11:33 ` [RFC PATCH v3 2/2] add support for Hyper-V partition reference time enlightenment Vadim Rozenfeld
2013-12-09 14:32 ` Paolo Bonzini
2013-12-10 11:23 ` Vadim Rozenfeld
2013-12-10 16:52 ` Paolo Bonzini
2013-12-11 10:58 ` Vadim Rozenfeld
2013-12-11 12:28 ` Paolo Bonzini
2013-12-11 19:28 ` Marcelo Tosatti
2013-12-11 19:27 ` Marcelo Tosatti
2013-12-12 9:34 ` Paolo Bonzini
2014-01-14 4:11 ` Vadim Rozenfeld
2014-01-14 13:54 ` Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A5D27B.7080408@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pl@dlhnet.de \
--cc=vrozenfe@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox