From: Paolo Bonzini <pbonzini@redhat.com>
To: Jan Kiszka <jan.kiszka@siemens.com>,
Gleb Natapov <gleb@kernel.org>,
Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm <kvm@vger.kernel.org>
Subject: Re: [PATCH v2 1/4] KVM: x86: Validate guest writes to MSR_IA32_APICBASE
Date: Fri, 24 Jan 2014 17:01:00 +0100 [thread overview]
Message-ID: <52E28E3C.8070104@redhat.com> (raw)
In-Reply-To: <1ba67ddad48673feb70c7c3a8bd0b62cef9d89cb.1390578527.git.jan.kiszka@siemens.com>
Il 24/01/2014 16:48, Jan Kiszka ha scritto:
> Check for invalid state transitions on guest-initiated updates of
> MSR_IA32_APICBASE. This address both enabling of the x2APIC when it is
> not supported and all invalid transitions as described in SDM section
> 10.12.5. It also checks that no reserved bit is set in APICBASE by the
> guest.
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> arch/x86/kvm/cpuid.h | 16 ++++++++++++++++
> arch/x86/kvm/lapic.h | 2 +-
> arch/x86/kvm/vmx.c | 9 +++++----
> arch/x86/kvm/x86.c | 32 +++++++++++++++++++++++++-------
> 4 files changed, 47 insertions(+), 12 deletions(-)
>
> diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
> index f1e4895..b012ad2 100644
> --- a/arch/x86/kvm/cpuid.h
> +++ b/arch/x86/kvm/cpuid.h
> @@ -72,4 +72,20 @@ static inline bool guest_cpuid_has_pcid(struct kvm_vcpu *vcpu)
> return best && (best->ecx & bit(X86_FEATURE_PCID));
> }
>
> +static inline bool guest_cpuid_has_x2apic(struct kvm_vcpu *vcpu)
> +{
> + struct kvm_cpuid_entry2 *best;
> +
> + best = kvm_find_cpuid_entry(vcpu, 1, 0);
> + return best && (best->ecx & bit(X86_FEATURE_X2APIC));
> +}
> +
> +static inline unsigned int guest_cpuid_get_phys_bits(struct kvm_vcpu *vcpu)
> +{
> + struct kvm_cpuid_entry2 *best;
> +
> + best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0);
> + return best ? best->eax & 0xff : 36;
> +}
[Resending after learning that Ctrl-Shift-C does other things beyond
copying to clipboard]
There's already cpuid_maxphyaddr for this. I can adjust it when committing.
This is applied to kvm/queue. The other three will have to wait for
after the merge window.
Paolo
> #endif
> diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
> index c8b0d0d..6a11845 100644
> --- a/arch/x86/kvm/lapic.h
> +++ b/arch/x86/kvm/lapic.h
> @@ -65,7 +65,7 @@ bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
> struct kvm_lapic_irq *irq, int *r, unsigned long *dest_map);
>
> u64 kvm_get_apic_base(struct kvm_vcpu *vcpu);
> -void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data);
> +int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info);
> void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
> struct kvm_lapic_state *s);
> int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 5c88791..a06f101 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -4392,7 +4392,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
> static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
> {
> struct vcpu_vmx *vmx = to_vmx(vcpu);
> - u64 msr;
> + struct msr_data apic_base_msr;
>
> vmx->rmode.vm86_active = 0;
>
> @@ -4400,10 +4400,11 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
>
> vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
> kvm_set_cr8(&vmx->vcpu, 0);
> - msr = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
> + apic_base_msr.data = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
> if (kvm_vcpu_is_bsp(&vmx->vcpu))
> - msr |= MSR_IA32_APICBASE_BSP;
> - kvm_set_apic_base(&vmx->vcpu, msr);
> + apic_base_msr.data |= MSR_IA32_APICBASE_BSP;
> + apic_base_msr.host_initiated = true;
> + kvm_set_apic_base(&vmx->vcpu, &apic_base_msr);
>
> vmx_segment_cache_clear(vmx);
>
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 0c76f7c..f4b0591 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -257,10 +257,26 @@ u64 kvm_get_apic_base(struct kvm_vcpu *vcpu)
> }
> EXPORT_SYMBOL_GPL(kvm_get_apic_base);
>
> -void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data)
> -{
> - /* TODO: reserve bits check */
> - kvm_lapic_set_base(vcpu, data);
> +int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> +{
> + u64 old_state = vcpu->arch.apic_base &
> + (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE);
> + u64 new_state = msr_info->data &
> + (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE);
> + u64 reserved_bits = ((~0ULL) << guest_cpuid_get_phys_bits(vcpu)) |
> + 0x2ff | (guest_cpuid_has_x2apic(vcpu) ? 0 : X2APIC_ENABLE);
> +
> + if (!msr_info->host_initiated &&
> + ((msr_info->data & reserved_bits) != 0 ||
> + new_state == X2APIC_ENABLE ||
> + (new_state == MSR_IA32_APICBASE_ENABLE &&
> + old_state == (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE)) ||
> + (new_state == (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE) &&
> + old_state == 0)))
> + return 1;
> +
> + kvm_lapic_set_base(vcpu, msr_info->data);
> + return 0;
> }
> EXPORT_SYMBOL_GPL(kvm_set_apic_base);
>
> @@ -2006,8 +2022,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> case 0x200 ... 0x2ff:
> return set_msr_mtrr(vcpu, msr, data);
> case MSR_IA32_APICBASE:
> - kvm_set_apic_base(vcpu, data);
> - break;
> + return kvm_set_apic_base(vcpu, msr_info);
> case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
> return kvm_x2apic_msr_write(vcpu, msr, data);
> case MSR_IA32_TSCDEADLINE:
> @@ -6409,6 +6424,7 @@ EXPORT_SYMBOL_GPL(kvm_task_switch);
> int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
> struct kvm_sregs *sregs)
> {
> + struct msr_data apic_base_msr;
> int mmu_reset_needed = 0;
> int pending_vec, max_bits, idx;
> struct desc_ptr dt;
> @@ -6432,7 +6448,9 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
>
> mmu_reset_needed |= vcpu->arch.efer != sregs->efer;
> kvm_x86_ops->set_efer(vcpu, sregs->efer);
> - kvm_set_apic_base(vcpu, sregs->apic_base);
> + apic_base_msr.data = sregs->apic_base;
> + apic_base_msr.host_initiated = true;
> + kvm_set_apic_base(vcpu, &apic_base_msr);
>
> mmu_reset_needed |= kvm_read_cr0(vcpu) != sregs->cr0;
> kvm_x86_ops->set_cr0(vcpu, sregs->cr0);
>
next prev parent reply other threads:[~2014-01-24 16:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-24 15:48 [PATCH v2 0/4] KVM: x86: Fixes for IA32_APIC_BASE and nVMX Jan Kiszka
2014-01-24 15:48 ` [PATCH v2 1/4] KVM: x86: Validate guest writes to MSR_IA32_APICBASE Jan Kiszka
2014-01-24 15:59 ` Paolo Bonzini
2014-01-24 16:01 ` Paolo Bonzini [this message]
2014-01-24 15:48 ` [PATCH v2 2/4] KVM: nVMX: Rework interception of IRQs and NMIs Jan Kiszka
2014-01-24 15:48 ` [PATCH v2 3/4] KVM: nVMX: Fully emulate preemption timer Jan Kiszka
2014-01-24 15:48 ` [PATCH v2 4/4] KVM: nVMX: Do not inject NMI vmexits when L2 has a pending interrupt Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E28E3C.8070104@redhat.com \
--to=pbonzini@redhat.com \
--cc=gleb@kernel.org \
--cc=jan.kiszka@siemens.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).