From: Mario Smarduch <m.smarduch@samsung.com>
To: Alexander Graf <agraf@suse.de>
Cc: kvmarm@lists.cs.columbia.edu, marc.zyngier@arm.com,
christoffer.dall@linaro.org, pbonzini@redhat.com,
gleb@kernel.org, xiantao.zhang@intel.com, borntraeger@de.ibm.com,
cornelia.huck@de.ibm.com, xiaoguangrong@linux.vnet.ibm.com,
steve.capper@arm.com, kvm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, jays.lee@samsung.com,
sungjinn.chung@samsung.com
Subject: Re: [PATCH v9 2/4] arm: ARMv7 dirty page logging inital mem region write protect (w/no huge PUD support)
Date: Fri, 25 Jul 2014 10:45:17 -0700 [thread overview]
Message-ID: <53D297AD.8020103@samsung.com> (raw)
In-Reply-To: <53D1F642.6010007@suse.de>
On 07/24/2014 11:16 PM, Alexander Graf wrote:
>
> On 25.07.14 02:56, Mario Smarduch wrote:
>> Patch adds support for initial write protection VM memlsot. This
>> patch series
>> assumes that huge PUDs will not be used in 2nd stage tables.
>
> Is this a valid assumption?
Right now it's unclear if PUDs will be used to back guest
memory, assuming so required quite a bit of additional code.
After discussing on mailing list it was recommended to
treat this as BUG_ON case for now.
>
>>
>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>> ---
>> arch/arm/include/asm/kvm_host.h | 1 +
>> arch/arm/include/asm/kvm_mmu.h | 20 ++++++
>> arch/arm/include/asm/pgtable-3level.h | 1 +
>> arch/arm/kvm/arm.c | 9 +++
>> arch/arm/kvm/mmu.c | 128
>> +++++++++++++++++++++++++++++++++
>> 5 files changed, 159 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/kvm_host.h
>> b/arch/arm/include/asm/kvm_host.h
>> index 042206f..6521a2d 100644
>> --- a/arch/arm/include/asm/kvm_host.h
>> +++ b/arch/arm/include/asm/kvm_host.h
>> @@ -231,5 +231,6 @@ int kvm_perf_teardown(void);
>> u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid);
>> int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value);
>> void kvm_arch_flush_remote_tlbs(struct kvm *);
>> +void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot);
>> #endif /* __ARM_KVM_HOST_H__ */
>> diff --git a/arch/arm/include/asm/kvm_mmu.h
>> b/arch/arm/include/asm/kvm_mmu.h
>> index 5cc0b0f..08ab5e8 100644
>> --- a/arch/arm/include/asm/kvm_mmu.h
>> +++ b/arch/arm/include/asm/kvm_mmu.h
>> @@ -114,6 +114,26 @@ static inline void kvm_set_s2pmd_writable(pmd_t
>> *pmd)
>> pmd_val(*pmd) |= L_PMD_S2_RDWR;
>> }
>> +static inline void kvm_set_s2pte_readonly(pte_t *pte)
>> +{
>> + pte_val(*pte) = (pte_val(*pte) & ~L_PTE_S2_RDWR) | L_PTE_S2_RDONLY;
>> +}
>> +
>> +static inline bool kvm_s2pte_readonly(pte_t *pte)
>> +{
>> + return (pte_val(*pte) & L_PTE_S2_RDWR) == L_PTE_S2_RDONLY;
>> +}
>> +
>> +static inline void kvm_set_s2pmd_readonly(pmd_t *pmd)
>> +{
>> + pmd_val(*pmd) = (pmd_val(*pmd) & ~L_PMD_S2_RDWR) | L_PMD_S2_RDONLY;
>> +}
>> +
>> +static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
>> +{
>> + return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY;
>> +}
>> +
>> /* Open coded p*d_addr_end that can deal with 64bit addresses */
>> #define kvm_pgd_addr_end(addr, end) \
>> ({ u64 __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK; \
>> diff --git a/arch/arm/include/asm/pgtable-3level.h
>> b/arch/arm/include/asm/pgtable-3level.h
>> index 85c60ad..d8bb40b 100644
>> --- a/arch/arm/include/asm/pgtable-3level.h
>> +++ b/arch/arm/include/asm/pgtable-3level.h
>> @@ -129,6 +129,7 @@
>> #define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /*
>> HAP[1] */
>> #define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /*
>> HAP[2:1] */
>> +#define L_PMD_S2_RDONLY (_AT(pteval_t, 1) << 6) /*
>> HAP[1] */
>> #define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /*
>> HAP[2:1] */
>> /*
>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
>> index 3c82b37..e11c2dd 100644
>> --- a/arch/arm/kvm/arm.c
>> +++ b/arch/arm/kvm/arm.c
>> @@ -242,6 +242,15 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
>> const struct kvm_memory_slot *old,
>> enum kvm_mr_change change)
>> {
>> +#ifdef CONFIG_ARM
>
> Same question on CONFIG_ARM here. Is this the define used to distinguish
> between 32bit and 64bit?
Yes let ARM64 compile. Eventually we'll come back to ARM64 soon, and
these will go.
>
>
> Alex
>
next prev parent reply other threads:[~2014-07-25 17:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-25 0:56 [PATCH v9 0/4] arm: dirty page logging support for ARMv7 Mario Smarduch
2014-07-25 0:56 ` [PATCH v9 1/4] arm: add ARMv7 HYP API to flush VM TLBs, change generic TLB flush to support arch flush Mario Smarduch
2014-07-25 6:12 ` Alexander Graf
2014-07-25 17:37 ` Mario Smarduch
2014-08-08 17:50 ` [PATCH v9 1/4] arm: add ARMv7 HYP API to flush VM TLBs ... - looking for comments Mario Smarduch
2014-08-11 19:12 ` [PATCH v9 1/4] arm: add ARMv7 HYP API to flush VM TLBs, change generic TLB flush to support arch flush Christoffer Dall
2014-08-11 23:54 ` Mario Smarduch
2014-07-25 0:56 ` [PATCH v9 2/4] arm: ARMv7 dirty page logging inital mem region write protect (w/no huge PUD support) Mario Smarduch
2014-07-25 6:16 ` Alexander Graf
2014-07-25 17:45 ` Mario Smarduch [this message]
2014-08-11 19:12 ` Christoffer Dall
2014-08-12 0:16 ` Mario Smarduch
2014-08-12 9:32 ` Christoffer Dall
2014-08-12 23:17 ` Mario Smarduch
2014-08-12 1:36 ` Mario Smarduch
2014-08-12 9:36 ` Christoffer Dall
2014-08-12 21:08 ` Mario Smarduch
2014-07-25 0:56 ` [PATCH v9 3/4] arm: dirty log write protect mgmt. Moved x86, armv7 to generic, set armv8 ia64 mips powerpc s390 arch specific Mario Smarduch
2014-08-11 19:13 ` Christoffer Dall
2014-08-12 0:24 ` Mario Smarduch
2014-07-25 0:56 ` [PATCH v9 4/4] arm: ARMv7 dirty page logging 2nd stage page fault handling support Mario Smarduch
2014-08-11 19:13 ` Christoffer Dall
2014-08-12 1:25 ` Mario Smarduch
2014-08-12 9:50 ` Christoffer Dall
2014-08-13 1:27 ` Mario Smarduch
2014-08-13 7:30 ` Christoffer Dall
2014-08-14 1:20 ` Mario Smarduch
2014-08-15 0:01 ` Mario Smarduch
2014-08-18 12:51 ` Christoffer Dall
2014-08-18 17:42 ` Mario Smarduch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D297AD.8020103@samsung.com \
--to=m.smarduch@samsung.com \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=christoffer.dall@linaro.org \
--cc=cornelia.huck@de.ibm.com \
--cc=gleb@kernel.org \
--cc=jays.lee@samsung.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=pbonzini@redhat.com \
--cc=steve.capper@arm.com \
--cc=sungjinn.chung@samsung.com \
--cc=xiantao.zhang@intel.com \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox