From: Mario Smarduch <m.smarduch@samsung.com>
To: Christoffer Dall <christoffer.dall@linaro.org>
Cc: kvmarm@lists.cs.columbia.edu, marc.zyngier@arm.com,
catalin.marinas@arm.com, pbonzini@redhat.com, gleb@kernel.org,
kvm@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] arm/arm64: Enable Dirty Page logging for ARMv8 move log read, tlb flush to generic code
Date: Fri, 07 Nov 2014 12:51:39 -0800 [thread overview]
Message-ID: <545D30DB.9020309@samsung.com> (raw)
In-Reply-To: <20141107202041.GH22848@cbox>
On 11/07/2014 12:20 PM, Christoffer Dall wrote:
> On Thu, Oct 09, 2014 at 07:34:07PM -0700, Mario Smarduch wrote:
>> This patch enables ARMv8 dirty page logging and unifies ARMv7/ARMv8 code.
>>
>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>> ---
>> arch/arm/include/asm/kvm_host.h | 12 ------------
>> arch/arm/kvm/arm.c | 9 ---------
>> arch/arm/kvm/mmu.c | 17 +++++++++++------
>> arch/arm64/kvm/Kconfig | 2 +-
>> 4 files changed, 12 insertions(+), 28 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
>> index 12311a5..59565f5 100644
>> --- a/arch/arm/include/asm/kvm_host.h
>> +++ b/arch/arm/include/asm/kvm_host.h
>> @@ -220,18 +220,6 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
>> kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
>> }
>>
>> -/**
>> - * kvm_arch_flush_remote_tlbs() - flush all VM TLB entries
>> - * @kvm: pointer to kvm structure.
>> - *
>> - * Interface to HYP function to flush all VM TLB entries without address
>> - * parameter.
>> - */
>> -static inline void kvm_arch_flush_remote_tlbs(struct kvm *kvm)
>> -{
>> - kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
>> -}
>> -
>> static inline int kvm_arch_dev_ioctl_check_extension(long ext)
>> {
>> return 0;
>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
>> index 0546fa3..6a6fd6b 100644
>> --- a/arch/arm/kvm/arm.c
>> +++ b/arch/arm/kvm/arm.c
>> @@ -242,7 +242,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
>> const struct kvm_memory_slot *old,
>> enum kvm_mr_change change)
>> {
>> -#ifdef CONFIG_ARM
>> /*
>> * At this point memslot has been committed and there is an
>> * allocated dirty_bitmap[], dirty pages will be be tracked while the
>> @@ -250,7 +249,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
>> */
>> if ((change != KVM_MR_DELETE) && (mem->flags & KVM_MEM_LOG_DIRTY_PAGES))
>> kvm_mmu_wp_memory_region(kvm, mem->slot);
>> -#endif
>> }
>>
>> void kvm_arch_flush_shadow_all(struct kvm *kvm)
>> @@ -783,13 +781,6 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
>> }
>> }
>>
>> -#ifdef CONFIG_ARM64
>> -int kvm_arch_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
>> -{
>> - return -EINVAL;
>> -}
>> -#endif
>> -
>> static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
>> struct kvm_arm_device_addr *dev_addr)
>> {
>> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
>> index df1a5a3..8c0f9f2 100644
>> --- a/arch/arm/kvm/mmu.c
>> +++ b/arch/arm/kvm/mmu.c
>> @@ -49,11 +49,18 @@ static phys_addr_t hyp_idmap_vector;
>>
>> static bool kvm_get_logging_state(struct kvm_memory_slot *memslot)
>> {
>> -#ifdef CONFIG_ARM
>> return !!memslot->dirty_bitmap;
>> -#else
>> - return false;
>> -#endif
>> +}
>> +
>> +/**
>> + * kvm_arch_flush_remote_tlbs() - flush all VM TLB entries for ARMv7/8
>> + * @kvm: pointer to kvm structure.
>> + *
>> + * Interface to HYP function to flush all VM TLB entries
>> + */
>> +inline void kvm_arch_flush_remote_tlbs(struct kvm *kvm)
>> +{
>> + kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
>> }
>>
>> static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
>> @@ -769,7 +776,6 @@ static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap)
>> return false;
>> }
>>
>> -#ifdef CONFIG_ARM
>> /**
>> * stage2_wp_ptes - write protect PMD range
>> * @pmd: pointer to pmd entry
>> @@ -917,7 +923,6 @@ void kvm_mmu_write_protect_pt_masked(struct kvm *kvm,
>>
>> stage2_wp_range(kvm, start, end);
>> }
>> -#endif
>>
>> static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>> struct kvm_memory_slot *memslot,
>> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
>> index 40a8d19..a1a35809 100644
>> --- a/arch/arm64/kvm/Kconfig
>> +++ b/arch/arm64/kvm/Kconfig
>> @@ -26,7 +26,7 @@ config KVM
>> select KVM_ARM_HOST
>> select KVM_ARM_VGIC
>> select KVM_ARM_TIMER
>> - select HAVE_KVM_ARCH_DIRTY_LOG
>> + select HAVE_KVM_ARCH_TLB_FLUSH_ALL
>> ---help---
>> Support hosting virtualized guest machines.
>>
>> --
>> 1.9.1
>>
>
> this patch needs to be rebased onto the newest version of your v7 patch,
> but otherwise it looks roughly ok.
Ok,
Thanks.
>
> -Christoffer
>
next prev parent reply other threads:[~2014-11-07 20:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-10 2:34 [PATCH 0/3] arm/arm64: Add dirty page logging for ARMv8 Mario Smarduch
2014-10-10 2:34 ` [PATCH 1/3] arm64: ARMv8 headers changes for dirty page logging Mario Smarduch
2014-11-07 20:20 ` Christoffer Dall
2014-11-07 20:49 ` Mario Smarduch
2014-10-10 2:34 ` [PATCH 2/3] arm64: Add HYP interface to flush VM Stage 1/2 TLB entires Mario Smarduch
2014-11-07 20:20 ` Christoffer Dall
2014-11-07 20:50 ` Mario Smarduch
2014-10-10 2:34 ` [PATCH 3/3] arm/arm64: Enable Dirty Page logging for ARMv8 move log read, tlb flush to generic code Mario Smarduch
2014-11-07 20:20 ` Christoffer Dall
2014-11-07 20:51 ` Mario Smarduch [this message]
2014-11-19 14:39 ` Christoffer Dall
2014-11-19 20:15 ` Mario Smarduch
2014-11-21 10:09 ` Christoffer Dall
2014-11-22 0:42 ` Mario Smarduch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545D30DB.9020309@samsung.com \
--to=m.smarduch@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@linaro.org \
--cc=gleb@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).