From: Marc Zyngier <marc.zyngier@arm.com>
To: Pavel Fedin <p.fedin@samsung.com>,
"kvmarm@lists.cs.columbia.edu" <kvmarm@lists.cs.columbia.edu>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Subject: Re: [PATCH v3 2/3] Detect vGIC presence at runtime
Date: Fri, 14 Aug 2015 12:26:14 +0100 [thread overview]
Message-ID: <55CDD056.8010703@arm.com> (raw)
In-Reply-To: <cad42f98c38c042430da47bf69ac2db81cb957af.1438770954.git.p.fedin@samsung.com>
On 05/08/15 11:53, Pavel Fedin wrote:
> Before commit 662d9715840aef44dcb573b0f9fab9e8319c868a is was possible to
> compile the kernel without vGIC and vTimer support. Commit message says
> about possibility to detect vGIC support in runtine, but this has never
> been implemented.
>
> This patch introdices runtime check, restoring the lost functionality. It
> again allows to use KVM on hardware without vGIC. Interrupt controller has
> to be emulated in userspace in this case.
>
> -ENODEV return code from probe function means there's no GIC at all.
> -ENXIO happens when, for example, there is GIC node in the device tree,
> but it does not specify vGIC resources. Normally this means that vGIC
> hardware is defunct. Any other error code is still treated as full stop
> because it might mean some really serious problems.
>
> This patch does not touch any virtual timer code, suggesting that timer
And that's a problem, see below.
> hardware is actually in place. Normally on boards in question it is true,
> however since vGIC is missing, it is impossible to correctly utilize
> interrupts from the virtual timer. Since virtual timer handling is in
> active redevelopment now, handling in it userspace is out of scope at
> the moment. The guest is currently suggested to use some memory-mapped
> timer which can be emulated in userspace.
>
> Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
> ---
> arch/arm/kvm/arm.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 199a50a..1039161 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -61,6 +61,8 @@ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
> static u8 kvm_next_vmid;
> static DEFINE_SPINLOCK(kvm_vmid_lock);
>
> +static bool vgic_present;
> +
> static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
> {
> BUG_ON(preemptible());
> @@ -131,7 +133,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
> kvm->arch.vmid_gen = 0;
>
> /* The maximum number of VCPUs is limited by the host's GIC model */
> - kvm->arch.max_vcpus = kvm_vgic_get_max_vcpus();
> + kvm->arch.max_vcpus = vgic_present ?
> + kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
>
> return ret;
> out_free_stage2_pgd:
> @@ -171,6 +174,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
> int r;
> switch (ext) {
> case KVM_CAP_IRQCHIP:
> + r = vgic_present;
> + break;
> case KVM_CAP_IOEVENTFD:
> case KVM_CAP_DEVICE_CTRL:
> case KVM_CAP_USER_MEMORY:
> @@ -849,6 +854,8 @@ static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
>
> switch (dev_id) {
> case KVM_ARM_DEVICE_VGIC_V2:
> + if (!vgic_present)
> + return -ENXIO;
> return kvm_vgic_addr(kvm, type, &dev_addr->addr, true);
> default:
> return -ENODEV;
> @@ -863,6 +870,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
>
> switch (ioctl) {
> case KVM_CREATE_IRQCHIP: {
> + if (!vgic_present)
> + return -ENXIO;
> return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
> }
> case KVM_ARM_SET_DEVICE_ADDR: {
> @@ -1045,8 +1054,12 @@ static int init_hyp_mode(void)
> * Init HYP view of VGIC
> */
> err = kvm_vgic_hyp_init();
> - if (err)
> + if (err == -ENODEV || err == -ENXIO)
> + vgic_present = false;
Which is the default value, isn't it?
> + else if (err)
> goto out_free_context;
> + else
> + vgic_present = true;
This is fairly unreadable. Please use a switch statement instead.
>
> /*
> * Init HYP architected timer support
>
And here, we're going to assume that the arch timer still usable. We
definitely need a way to *prevent* the timer to be used when there is no
GIC. Otherwise, we're going to start trying to setup the mapping for the
active state, and the guest may start poking it.
Timer and GIC are really tied to each other. If you start making one
optional, you need to carry on working the dependency chain.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2015-08-14 11:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-05 10:53 [PATCH v3 0/3] KVM: arm/arm64: Allow to use KVM without in-kernel irqchip Pavel Fedin
2015-08-05 10:53 ` [PATCH v3 1/3] Fix NULL pointer dereference if KVM is used " Pavel Fedin
2015-08-05 10:53 ` [PATCH v3 2/3] Detect vGIC presence at runtime Pavel Fedin
2015-08-14 11:26 ` Marc Zyngier [this message]
2015-08-14 12:26 ` Pavel Fedin
2015-08-14 13:10 ` Marc Zyngier
2015-08-14 13:41 ` Pavel Fedin
2015-08-05 10:53 ` [PATCH v3 3/3] Make KVM_CAP_IRQFD dependent on KVM_CAP_IRQCHIP Pavel Fedin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CDD056.8010703@arm.com \
--to=marc.zyngier@arm.com \
--cc=christoffer.dall@linaro.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=p.fedin@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox