kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wei Huang <wei@redhat.com>
To: Shannon Zhao <shannon.zhao@linaro.org>, kvmarm@lists.cs.columbia.edu
Cc: kvm@vger.kernel.org, marc.zyngier@arm.com, will.deacon@arm.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register
Date: Fri, 16 Oct 2015 00:35:50 -0500	[thread overview]
Message-ID: <56208CB6.1050508@redhat.com> (raw)
In-Reply-To: <1443133885-3366-5-git-send-email-shannon.zhao@linaro.org>



On 09/24/2015 05:31 PM, Shannon Zhao wrote:
> Add reset handler which gets host value of PMCR_EL0 and make writable
> bits architecturally UNKNOWN. Add a common access handler for PMU
> registers which emulates writing and reading register and add emulation
> for PMCR.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/kvm/sys_regs.c | 81 +++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 79 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index b41607d..60c0842 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -33,6 +33,7 @@
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_host.h>
>  #include <asm/kvm_mmu.h>
> +#include <asm/pmu.h>
>  
>  #include <trace/events/kvm.h>
>  
> @@ -446,6 +447,53 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>  	vcpu_sys_reg(vcpu, MPIDR_EL1) = (1ULL << 31) | mpidr;
>  }
>  
> +static void vcpu_sysreg_write(struct kvm_vcpu *vcpu,
> +			      const struct sys_reg_desc *r, u64 val)
> +{
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		vcpu_sys_reg(vcpu, r->reg) = val;
> +	else
> +		vcpu_cp15(vcpu, r->reg) = lower_32_bits(val);
> +}
> +
> +static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
> +{
> +	u64 pmcr, val;
> +
> +	asm volatile("mrs %0, pmcr_el0\n" : "=r" (pmcr));
> +	/* Writable bits of PMCR_EL0 (ARMV8_PMCR_MASK) is reset to UNKNOWN*/
> +	val = (pmcr & ~ARMV8_PMCR_MASK) | (ARMV8_PMCR_MASK & 0xdecafbad);

Two comments:
(1) In Patch 1, ARMV8_PMCR_MASK is defined as 0x3f. According to ARMv8
spec, PMCR_EL0.LC (bit 6) is also writable. Should ARMV8_PMCR_MASK be 0x7f?
(2) According to spec the PMCR_EL0.E bit reset to 0, not UNKNOWN.


> +	vcpu_sysreg_write(vcpu, r, val);
> +}
> +
> +/* PMU registers accessor. */
> +static bool access_pmu_regs(struct kvm_vcpu *vcpu,
> +			    const struct sys_reg_params *p,
> +			    const struct sys_reg_desc *r)
> +{
> +	unsigned long val;
> +
> +	if (p->is_write) {
> +		switch (r->reg) {
> +		case PMCR_EL0: {
> +			/* Only update writeable bits of PMCR */
> +			val = vcpu_sys_reg(vcpu, r->reg);
> +			val &= ~ARMV8_PMCR_MASK;
> +			val |= *vcpu_reg(vcpu, p->Rt) & ARMV8_PMCR_MASK;
> +			vcpu_sys_reg(vcpu, r->reg) = val;
> +			break;
> +		}
> +		default:
> +			vcpu_sys_reg(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
> +			break;
> +		}
> +	} else {
> +		*vcpu_reg(vcpu, p->Rt) = vcpu_sys_reg(vcpu, r->reg);
> +	}
> +
> +	return true;
> +}
> +
>  /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
>  #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
>  	/* DBGBVRn_EL1 */						\
> @@ -637,7 +685,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>  
>  	/* PMCR_EL0 */
>  	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
> -	  trap_raz_wi },
> +	  access_pmu_regs, reset_pmcr, PMCR_EL0, },
>  	/* PMCNTENSET_EL0 */
>  	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
>  	  trap_raz_wi },
> @@ -871,6 +919,34 @@ static const struct sys_reg_desc cp14_64_regs[] = {
>  	{ Op1( 0), CRm( 2), .access = trap_raz_wi },
>  };
>  
> +/* PMU CP15 registers accessor. */
> +static bool access_pmu_cp15_regs(struct kvm_vcpu *vcpu,
> +				 const struct sys_reg_params *p,
> +				 const struct sys_reg_desc *r)
> +{
> +	unsigned long val;
> +
> +	if (p->is_write) {
> +		switch (r->reg) {
> +		case c9_PMCR: {
> +			/* Only update writeable bits of PMCR */
> +			val = vcpu_cp15(vcpu, r->reg);
> +			val &= ~ARMV8_PMCR_MASK;
> +			val |= *vcpu_reg(vcpu, p->Rt) & ARMV8_PMCR_MASK;
> +			vcpu_cp15(vcpu, r->reg) = val;
> +			break;
> +		}
> +		default:
> +			vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
> +			break;
> +		}
> +	} else {
> +		*vcpu_reg(vcpu, p->Rt) = vcpu_cp15(vcpu, r->reg);
> +	}
> +
> +	return true;
> +}
> +
>  /*
>   * Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
>   * depending on the way they are accessed (as a 32bit or a 64bit
> @@ -899,7 +975,8 @@ static const struct sys_reg_desc cp15_regs[] = {
>  	{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
>  
>  	/* PMU */
> -	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), trap_raz_wi },
> +	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), access_pmu_cp15_regs,
> +	  reset_pmcr, c9_PMCR },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
> 

  reply	other threads:[~2015-10-16  5:35 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-24 22:31 [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 01/20] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 02/20] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 03/20] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-10-07  8:25   ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-10-16  5:35   ` Wei Huang [this message]
2015-10-21  6:27     ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 05/20] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 06/20] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 07/20] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-10-16  6:08   ` Wei Huang
2015-10-21  6:32     ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 08/20] KVM: ARM64: Add reset and access handlers for PMXEVTYPER register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 09/20] KVM: ARM64: Add reset and access handlers for PMXEVCNTR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 10/20] KVM: ARM64: Add reset and access handlers for PMCCNTR register Shannon Zhao
2015-10-16 15:06   ` Wei Huang
2015-10-21  6:48     ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 11/20] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 12/20] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 13/20] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 14/20] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 15/20] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-10-16 15:25   ` Wei Huang
2015-10-21  7:02     ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 16/20] KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 17/20] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-10-07  8:17   ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 18/20] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-10-16 15:28   ` Wei Huang
2015-09-24 22:31 ` [PATCH v3 19/20] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 20/20] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-10-16  4:55 ` [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Wei Huang
2015-10-16 17:01   ` Christopher Covington
2015-10-21  7:26     ` Shannon Zhao
2015-10-26 11:33 ` Christoffer Dall
2015-10-27  1:15   ` Shannon Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56208CB6.1050508@redhat.com \
    --to=wei@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=shannon.zhao@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).