From: Marc Zyngier <marc.zyngier@arm.com>
To: Eric Auger <eric.auger@redhat.com>
Cc: kvm@vger.kernel.org, cdall@linaro.org, andre.przywara@arm.com,
linux-kernel@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
wu.wubin@huawei.com, eric.auger.pro@gmail.com
Subject: Re: [PATCH v5 08/10] KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
Date: Wed, 25 Oct 2017 11:23:09 +0100 [thread overview]
Message-ID: <86mv4fedbm.fsf@arm.com> (raw)
In-Reply-To: <1508767709-15256-9-git-send-email-eric.auger@redhat.com> (Eric Auger's message of "Mon, 23 Oct 2017 16:08:27 +0200")
On Mon, Oct 23 2017 at 4:08:27 pm BST, Eric Auger <eric.auger@redhat.com> wrote:
> When the GITS_BASER<n>.Valid gets cleared, the data structures in
> guest RAM are not valid anymore. The device, collection
> and LPI lists stored in the in-kernel ITS represent the same
> information in some form of cache. So let's void the cache.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>
> ---
> v4 -> v5:
> - add comment about locking
>
> v2 -> v3:
> - add a comment and clear cache in if block
> ---
> virt/kvm/arm/vgic/vgic-its.c | 27 +++++++++++++++++++++++----
> 1 file changed, 23 insertions(+), 4 deletions(-)
>
> diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
> index 8098f91..bdfceb4 100644
> --- a/virt/kvm/arm/vgic/vgic-its.c
> +++ b/virt/kvm/arm/vgic/vgic-its.c
> @@ -1434,8 +1434,9 @@ static void vgic_mmio_write_its_baser(struct kvm *kvm,
> unsigned long val)
> {
> const struct vgic_its_abi *abi = vgic_its_get_abi(its);
> - u64 entry_size, device_type;
> + u64 entry_size;
> u64 reg, *regptr, clearbits = 0;
> + int type;
>
> /* When GITS_CTLR.Enable is 1, we ignore write accesses. */
> if (its->enabled)
> @@ -1445,12 +1446,12 @@ static void vgic_mmio_write_its_baser(struct kvm *kvm,
> case 0:
> regptr = &its->baser_device_table;
> entry_size = abi->dte_esz;
> - device_type = GITS_BASER_TYPE_DEVICE;
> + type = GITS_BASER_TYPE_DEVICE;
> break;
> case 1:
> regptr = &its->baser_coll_table;
> entry_size = abi->cte_esz;
> - device_type = GITS_BASER_TYPE_COLLECTION;
> + type = GITS_BASER_TYPE_COLLECTION;
> clearbits = GITS_BASER_INDIRECT;
> break;
> default:
> @@ -1462,10 +1463,28 @@ static void vgic_mmio_write_its_baser(struct kvm *kvm,
> reg &= ~clearbits;
>
> reg |= (entry_size - 1) << GITS_BASER_ENTRY_SIZE_SHIFT;
> - reg |= device_type << GITS_BASER_TYPE_SHIFT;
> + reg |= (u64)type << GITS_BASER_TYPE_SHIFT;
Nit: Why having changed the type to being an int? The existing type (u64) was
perfectly sane, and avoids the ugly cast. Also, table_type would be more
explicit than the pretty generic "type".
> reg = vgic_sanitise_its_baser(reg);
>
> *regptr = reg;
> +
> + /*
> + * If the table is no longer valid, we clear the associated cached data.
> + * Note: there cannot be any race with save/restore code which locks
> + * all vcpus.
> + */
> + if (!(reg & GITS_BASER_VALID)) {
> + switch (type) {
> + case GITS_BASER_TYPE_DEVICE:
> + vgic_its_free_device_list(kvm, its);
> + break;
> + case GITS_BASER_TYPE_COLLECTION:
> + vgic_its_free_collection_list(kvm, its);
> + break;
> + default:
> + break;
Nit: this default clause is useless.
> + }
> + }
> }
>
> static unsigned long vgic_mmio_read_its_ctlr(struct kvm *vcpu,
Otherwise:
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
M.
--
Jazz is not dead. It just smells funny.
next prev parent reply other threads:[~2017-10-25 10:23 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-23 14:08 [PATCH v5 00/10] vITS Migration fixes and reset Eric Auger
2017-10-23 14:08 ` [PATCH v5 01/10] KVM: arm/arm64: vgic-its: Fix return value for device table restore Eric Auger
2017-10-24 16:02 ` Christoffer Dall
2017-10-23 14:08 ` [PATCH v5 02/10] KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value Eric Auger
2017-10-24 16:15 ` Christoffer Dall
2017-10-23 14:08 ` [PATCH v5 03/10] KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS Eric Auger
2017-10-25 9:38 ` Marc Zyngier
2017-10-25 9:46 ` Marc Zyngier
2017-10-25 11:52 ` Christoffer Dall
2017-10-23 14:08 ` [PATCH v5 04/10] KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables Eric Auger
2017-10-25 9:47 ` Marc Zyngier
2017-10-23 14:08 ` [PATCH v5 05/10] KVM: arm/arm64: vgic-its: Save the collection table before device tables Eric Auger
2017-10-25 9:59 ` Christoffer Dall
2017-10-23 14:08 ` [PATCH v5 06/10] KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device Eric Auger
2017-10-25 9:45 ` Christoffer Dall
2017-10-23 14:08 ` [PATCH v5 07/10] KVM: arm/arm64: vgic-its: New helper functions to free the caches Eric Auger
2017-10-25 10:31 ` Christoffer Dall
2017-10-25 10:31 ` Marc Zyngier
2017-10-23 14:08 ` [PATCH v5 08/10] KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared Eric Auger
2017-10-25 10:23 ` Marc Zyngier [this message]
2017-10-23 14:08 ` [PATCH v5 09/10] KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET Eric Auger
2017-10-25 10:40 ` Marc Zyngier
2017-10-23 14:08 ` [PATCH v5 10/10] KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET Eric Auger
2017-10-25 10:52 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86mv4fedbm.fsf@arm.com \
--to=marc.zyngier@arm.com \
--cc=andre.przywara@arm.com \
--cc=cdall@linaro.org \
--cc=eric.auger.pro@gmail.com \
--cc=eric.auger@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=wu.wubin@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox