From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 02/11] KVM: VMX: Track common EPTP for Hyper-V's paravirt TLB flush
Date: Thu, 12 Nov 2020 11:27:11 +0100 [thread overview]
Message-ID: <87eekyzx8g.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20201027212346.23409-3-sean.j.christopherson@intel.com>
Sean Christopherson <sean.j.christopherson@intel.com> writes:
> Explicitly track the EPTP that is common to all vCPUs instead of
> grabbing vCPU0's EPTP when invoking Hyper-V's paravirt TLB flush.
> Tracking the EPTP will allow optimizing the checks when loading a new
> EPTP and will also allow dropping ept_pointer_match, e.g. by marking
> the common EPTP as invalid.
>
> This also technically fixes a bug where KVM could theoretically flush an
> invalid GPA if all vCPUs have an invalid root. In practice, it's likely
> impossible to trigger a remote TLB flush in such a scenario. In any
> case, the superfluous flush is completely benign.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> arch/x86/kvm/vmx/vmx.c | 20 +++++++++-----------
> arch/x86/kvm/vmx/vmx.h | 1 +
> 2 files changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 273a3206cef7..ebc87df4da4d 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -483,12 +483,14 @@ static void check_ept_pointer_match(struct kvm *kvm)
> if (!VALID_PAGE(tmp_eptp)) {
> tmp_eptp = to_vmx(vcpu)->ept_pointer;
> } else if (tmp_eptp != to_vmx(vcpu)->ept_pointer) {
> + to_kvm_vmx(kvm)->hv_tlb_eptp = INVALID_PAGE;
> to_kvm_vmx(kvm)->ept_pointers_match
> = EPT_POINTERS_MISMATCH;
> return;
> }
> }
>
> + to_kvm_vmx(kvm)->hv_tlb_eptp = tmp_eptp;
> to_kvm_vmx(kvm)->ept_pointers_match = EPT_POINTERS_MATCH;
> }
>
> @@ -501,21 +503,18 @@ static int kvm_fill_hv_flush_list_func(struct hv_guest_mapping_flush_list *flush
> range->pages);
> }
>
> -static inline int __hv_remote_flush_tlb_with_range(struct kvm *kvm,
> - struct kvm_vcpu *vcpu, struct kvm_tlb_range *range)
> +static inline int hv_remote_flush_eptp(u64 eptp, struct kvm_tlb_range *range)
> {
> - u64 ept_pointer = to_vmx(vcpu)->ept_pointer;
> -
> /*
> * FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE hypercall needs address
> * of the base of EPT PML4 table, strip off EPT configuration
> * information.
> */
> if (range)
> - return hyperv_flush_guest_mapping_range(ept_pointer & PAGE_MASK,
> + return hyperv_flush_guest_mapping_range(eptp & PAGE_MASK,
> kvm_fill_hv_flush_list_func, (void *)range);
> else
> - return hyperv_flush_guest_mapping(ept_pointer & PAGE_MASK);
> + return hyperv_flush_guest_mapping(eptp & PAGE_MASK);
> }
>
> static int hv_remote_flush_tlb_with_range(struct kvm *kvm,
> @@ -533,12 +532,11 @@ static int hv_remote_flush_tlb_with_range(struct kvm *kvm,
> kvm_for_each_vcpu(i, vcpu, kvm) {
> /* If ept_pointer is invalid pointer, bypass flush request. */
> if (VALID_PAGE(to_vmx(vcpu)->ept_pointer))
> - ret |= __hv_remote_flush_tlb_with_range(
> - kvm, vcpu, range);
> + ret |= hv_remote_flush_eptp(to_vmx(vcpu)->ept_pointer,
> + range);
> }
> - } else {
> - ret = __hv_remote_flush_tlb_with_range(kvm,
> - kvm_get_vcpu(kvm, 0), range);
> + } else if (VALID_PAGE(to_kvm_vmx(kvm)->hv_tlb_eptp)) {
> + ret = hv_remote_flush_eptp(to_kvm_vmx(kvm)->hv_tlb_eptp, range);
> }
>
> spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock);
> diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
> index a2d143276603..9a25e83f8b96 100644
> --- a/arch/x86/kvm/vmx/vmx.h
> +++ b/arch/x86/kvm/vmx/vmx.h
> @@ -301,6 +301,7 @@ struct kvm_vmx {
> bool ept_identity_pagetable_done;
> gpa_t ept_identity_map_addr;
>
> + hpa_t hv_tlb_eptp;
> enum ept_pointers_status ept_pointers_match;
> spinlock_t ept_pointer_lock;
> };
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
--
Vitaly
next prev parent reply other threads:[~2020-11-12 10:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 21:23 [PATCH v3 00/11] KVM: VMX: Clean up Hyper-V PV TLB flush Sean Christopherson
2020-10-27 21:23 ` [PATCH v3 01/11] KVM: x86: Get active PCID only when writing a CR3 value Sean Christopherson
2020-11-12 10:11 ` Vitaly Kuznetsov
2021-01-27 17:30 ` Paolo Bonzini
2020-10-27 21:23 ` [PATCH v3 02/11] KVM: VMX: Track common EPTP for Hyper-V's paravirt TLB flush Sean Christopherson
2020-11-12 10:27 ` Vitaly Kuznetsov [this message]
2020-10-27 21:23 ` [PATCH v3 03/11] KVM: VMX: Stash kvm_vmx in a local variable for Hyper-V " Sean Christopherson
2020-10-27 21:23 ` [PATCH v3 04/11] KVM: VMX: Fold Hyper-V EPTP checking into it's only caller Sean Christopherson
2020-11-12 10:41 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 05/11] KVM: VMX: Do Hyper-V TLB flush iff vCPU's EPTP hasn't been flushed Sean Christopherson
2020-11-12 10:47 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 06/11] KVM: VMX: Invalidate hv_tlb_eptp to denote an EPTP mismatch Sean Christopherson
2020-11-12 10:50 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 07/11] KVM: VMX: Don't invalidate hv_tlb_eptp if the new EPTP matches Sean Christopherson
2020-10-27 21:23 ` [PATCH v3 08/11] KVM: VMX: Explicitly check for hv_remote_flush_tlb when loading pgd Sean Christopherson
2020-10-27 21:23 ` [PATCH v3 09/11] KVM: VMX: Define Hyper-V paravirt TLB flush fields iff Hyper-V is enabled Sean Christopherson
2020-11-12 10:52 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 10/11] KVM: VMX: Skip additional Hyper-V TLB EPTP flushes if one fails Sean Christopherson
2020-11-12 10:59 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 11/11] KVM: VMX: Track root HPA instead of EPTP for paravirt Hyper-V TLB flush Sean Christopherson
2020-11-12 11:02 ` Vitaly Kuznetsov
2021-01-27 18:10 ` [PATCH v3 00/11] KVM: VMX: Clean up Hyper-V PV " Paolo Bonzini
2021-03-02 18:56 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87eekyzx8g.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox