* KVM on RHEL5.5 [not found] <AANLkTikpbAmZmBx1BXJv3VWQ1qqBaVfZCNPxjNiWM2MS@mail.gmail.com> @ 2010-05-14 8:10 ` TianJing 2010-05-14 8:33 ` Alexander Graf 0 siblings, 1 reply; 4+ messages in thread From: TianJing @ 2010-05-14 8:10 UTC (permalink / raw) To: kvm Hi all, i am trying to install kvm on RHEL5.5, the server is power leader S5000VSA, the CPU is intel E5335, and i check that it support vm. when i run the commamd: modprobe kvm_intel i got the following error message:FATAL: Error inserting kvm_intel (/lib/modules/2.6.26.5-45.fc9.x86_64/extra/kvm-intel.ko): Operation not supported and also i find in the /var/log/dmesg: kvm: disables by bios. so i turn on the VT in the bios,and reboot the server. but again i got the some error,but nothing in the /var/log/dmesg. any ideas? thanks, tianjing ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: KVM on RHEL5.5 2010-05-14 8:10 ` KVM on RHEL5.5 TianJing @ 2010-05-14 8:33 ` Alexander Graf 2010-05-14 12:59 ` Amos Kong 0 siblings, 1 reply; 4+ messages in thread From: Alexander Graf @ 2010-05-14 8:33 UTC (permalink / raw) To: TianJing; +Cc: kvm On 14.05.2010, at 10:10, TianJing wrote: > Hi all, > > i am trying to install kvm on RHEL5.5, the server is power leader > S5000VSA, the CPU is intel E5335, and i check that it support vm. > when i run the commamd: modprobe kvm_intel > i got the following error message:FATAL: Error inserting kvm_intel > (/lib/modules/2.6.26.5-45.fc9.x86_64/extra/kvm-intel.ko): Operation > not supported > and also i find in the /var/log/dmesg: kvm: disables by bios. > so i turn on the VT in the bios,and reboot the server. > but again i got the some error,but nothing in the /var/log/dmesg. > > any ideas? After enabling VT in the bios you need to power cycle the machine. A simple reboot doesn't help. Alex ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: KVM on RHEL5.5 2010-05-14 8:33 ` Alexander Graf @ 2010-05-14 12:59 ` Amos Kong 2010-05-18 7:41 ` TianJing 0 siblings, 1 reply; 4+ messages in thread From: Amos Kong @ 2010-05-14 12:59 UTC (permalink / raw) To: Alexander Graf; +Cc: TianJing, kvm On Fri, May 14, 2010 at 4:33 PM, Alexander Graf <agraf@suse.de> wrote: > On 14.05.2010, at 10:10, TianJing wrote: >> Hi all, >> >> i am trying to install kvm on RHEL5.5, the server is power leader >> S5000VSA, the CPU is intel E5335, and i check that it support vm. >> when i run the commamd: modprobe kvm_intel >> i got the following error message:FATAL: Error inserting kvm_intel >> (/lib/modules/2.6.26.5-45.fc9.x86_64/extra/kvm-intel.ko): Operation >> not supported >> and also i find in the /var/log/dmesg: kvm: disables by bios. >> so i turn on the VT in the bios,and reboot the server. >> but again i got the some error,but nothing in the /var/log/dmesg. >> >> any ideas? > > After enabling VT in the bios you need to power cycle the machine. A simple reboot doesn't help. Yes, I also touched this problem. problem was resolved after cold boot. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: KVM on RHEL5.5 2010-05-14 12:59 ` Amos Kong @ 2010-05-18 7:41 ` TianJing 0 siblings, 0 replies; 4+ messages in thread From: TianJing @ 2010-05-18 7:41 UTC (permalink / raw) To: Amos Kong; +Cc: Alexander Graf, kvm Hi all， thanks very much， it works after cold boot! tianjing On Fri, May 14, 2010 at 8:59 PM, Amos Kong <kongjianjun@gmail.com> wrote: > On Fri, May 14, 2010 at 4:33 PM, Alexander Graf <agraf@suse.de> wrote: >> On 14.05.2010, at 10:10, TianJing wrote: >>> Hi all, >>> >>> i am trying to install kvm on RHEL5.5, the server is power leader >>> S5000VSA, the CPU is intel E5335, and i check that it support vm. >>> when i run the commamd: modprobe kvm_intel >>> i got the following error message:FATAL: Error inserting kvm_intel >>> (/lib/modules/2.6.26.5-45.fc9.x86_64/extra/kvm-intel.ko): Operation >>> not supported >>> and also i find in the /var/log/dmesg: kvm: disables by bios. >>> so i turn on the VT in the bios,and reboot the server. >>> but again i got the some error,but nothing in the /var/log/dmesg. >>> >>> any ideas? >> >> After enabling VT in the bios you need to power cycle the machine. A simple reboot doesn't help. > > Yes, I also touched this problem. problem was resolved after cold boot. > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-05-18 7:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <AANLkTikpbAmZmBx1BXJv3VWQ1qqBaVfZCNPxjNiWM2MS@mail.gmail.com>
2010-05-14 8:10 ` KVM on RHEL5.5 TianJing
2010-05-14 8:33 ` Alexander Graf
2010-05-14 12:59 ` Amos Kong
2010-05-18 7:41 ` TianJing
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).