[kvm-unit-tests PATCH v2 0/4] arm: pmu: Add support for PMUv3p5

[kvm-unit-tests PATCH v2 0/4] arm: pmu: Add support for PMUv3p5

[Ricardo Koller]

The first commit fixes the tests when running on PMUv3p5. The issue is that
PMUv3p5 uses 64-bit counters irrespective of whether the PMU is configured
for overflowing at 32 or 64-bits. Tests are currently failing [0] on
PMUv3p5 because of this. They wrongly assume that values will be wrapped
around 32-bits, but they overflow into the other half of the 64-bit
counters.

The second and third commits add new tests for 64-bit overflows, a feature
added with PMUv3p5 (PMCR_EL0.LP == 1). This is done by running all
overflow-related tests in two modes: with 32-bit and 64-bit overflows.
The fourt commit changes the value reporting to use %lx instead of %ld.

This series was tested on PMUv3p5 and PMUv3p4 using the ARM Fast Model and
kvmtool.  All tests pass on both PMUv3p5 and PMUv3p4 when using Marc's
PMUv3p5 series [0], plus the suggestion made at [1]. Didn't test AArch32.

Changes from v1 (all suggested by Alexandru):
- report counter values in hexadecimal
- s/overflow_at_64bits/unused for all chained tests
- check that odd counters do not increment when using overflow_at_64bits
  (pmcr.LP=1)
- test 64-bit odd counters overflows
- switch confusing var names in test_chained_sw_incr(): cntr0 <-> cntr1

[0] https://lore.kernel.org/kvmarm/20221113163832.3154370-1-maz@kernel.org/
[1] https://lore.kernel.org/kvmarm/Y4jasyxvFRNvvmox@google.com/

Ricardo Koller (4):
  arm: pmu: Fix overflow checks for PMUv3p5 long counters
  arm: pmu: Prepare for testing 64-bit overflows
  arm: pmu: Add tests for 64-bit overflows
  arm: pmu: Print counter values as hexadecimals

 arm/pmu.c | 240 +++++++++++++++++++++++++++++++++---------------------
 1 file changed, 149 insertions(+), 91 deletions(-)

-- 
2.39.0.314.g84b9a713c41-goog

[kvm-unit-tests PATCH v2 1/4] arm: pmu: Fix overflow checks for PMUv3p5 long counters

[Ricardo Koller]

PMUv3p5 uses 64-bit counters irrespective of whether the PMU is configured
for overflowing at 32 or 64-bits. The consequence is that tests that check
the counter values after overflowing should not assume that values will be
wrapped around 32-bits: they overflow into the other half of the 64-bit
counters on PMUv3p5.

Fix tests by correctly checking overflowing-counters against the expected
64-bit value.

Signed-off-by: Ricardo Koller <ricarkol@google.com>
---
 arm/pmu.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/arm/pmu.c b/arm/pmu.c
index cd47b14..1b55e20 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -54,10 +54,13 @@
 #define EXT_COMMON_EVENTS_LOW	0x4000
 #define EXT_COMMON_EVENTS_HIGH	0x403F
 
-#define ALL_SET			0xFFFFFFFF
-#define ALL_CLEAR		0x0
-#define PRE_OVERFLOW		0xFFFFFFF0
-#define PRE_OVERFLOW2		0xFFFFFFDC
+#define ALL_SET			0x00000000FFFFFFFFULL
+#define ALL_SET_64		0xFFFFFFFFFFFFFFFFULL
+#define ALL_CLEAR		0x0000000000000000ULL
+#define PRE_OVERFLOW		0x00000000FFFFFFF0ULL
+#define PRE_OVERFLOW2		0x00000000FFFFFFDCULL
+
+#define ALL_SET_AT(_64b)       (_64b ? ALL_SET_64 : ALL_SET)
 
 #define PMU_PPI			23
 
@@ -538,6 +541,7 @@ static void test_mem_access(void)
 static void test_sw_incr(void)
 {
 	uint32_t events[] = {SW_INCR, SW_INCR};
+	uint64_t cntr0;
 	int i;
 
 	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
@@ -572,9 +576,11 @@ static void test_sw_incr(void)
 		write_sysreg(0x3, pmswinc_el0);
 
 	isb();
-	report(read_regn_el0(pmevcntr, 0)  == 84, "counter #1 after + 100 SW_INCR");
-	report(read_regn_el0(pmevcntr, 1)  == 100,
-		"counter #0 after + 100 SW_INCR");
+	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ?
+		(uint32_t)PRE_OVERFLOW + 100 :
+		(uint64_t)PRE_OVERFLOW + 100;
+	report(read_regn_el0(pmevcntr, 0) == cntr0, "counter #0 after + 100 SW_INCR");
+	report(read_regn_el0(pmevcntr, 1) == 100, "counter #1 after + 100 SW_INCR");
 	report_info("counter values after 100 SW_INCR #0=%ld #1=%ld",
 		    read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
 	report(read_sysreg(pmovsclr_el0) == 0x1,
@@ -584,6 +590,7 @@ static void test_sw_incr(void)
 static void test_chained_counters(void)
 {
 	uint32_t events[] = {CPU_CYCLES, CHAIN};
+	uint64_t all_set = ALL_SET_AT(pmu.version >= ID_DFR0_PMU_V3_8_5);
 
 	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
 		return;
@@ -614,17 +621,19 @@ static void test_chained_counters(void)
 	report(read_sysreg(pmovsclr_el0) == 0x1, "overflow recorded for chained incr #2");
 
 	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
-	write_regn_el0(pmevcntr, 1, ALL_SET);
+	write_regn_el0(pmevcntr, 1, all_set);
 
 	precise_instrs_loop(22, pmu.pmcr_ro | PMU_PMCR_E);
 	report_info("overflow reg = 0x%lx", read_sysreg(pmovsclr_el0));
-	report(!read_regn_el0(pmevcntr, 1), "CHAIN counter #1 wrapped");
+	report(read_regn_el0(pmevcntr, 1) == 0, "CHAIN counter #1 wrapped");
+
 	report(read_sysreg(pmovsclr_el0) == 0x3, "overflow on even and odd counters");
 }
 
 static void test_chained_sw_incr(void)
 {
 	uint32_t events[] = {SW_INCR, CHAIN};
+	uint64_t cntr0, cntr1;
 	int i;
 
 	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
@@ -665,10 +674,14 @@ static void test_chained_sw_incr(void)
 		write_sysreg(0x1, pmswinc_el0);
 
 	isb();
+	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ?
+		(uint32_t)PRE_OVERFLOW + 100 :
+		(uint64_t)PRE_OVERFLOW + 100;
+	cntr1 = (pmu.version < ID_DFR0_PMU_V3_8_5) ? 0 : ALL_SET + 1;
 	report((read_sysreg(pmovsclr_el0) == 0x3) &&
-		(read_regn_el0(pmevcntr, 1) == 0) &&
-		(read_regn_el0(pmevcntr, 0) == 84),
-		"expected overflows and values after 100 SW_INCR/CHAIN");
+	       (read_regn_el0(pmevcntr, 0) == cntr0) &&
+	       (read_regn_el0(pmevcntr, 1) == cntr1),
+	       "expected overflows and values after 100 SW_INCR/CHAIN");
 	report_info("overflow=0x%lx, #0=%ld #1=%ld", read_sysreg(pmovsclr_el0),
 		    read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
 }
-- 
2.39.0.314.g84b9a713c41-goog

Re: [kvm-unit-tests PATCH v2 1/4] arm: pmu: Fix overflow checks for PMUv3p5 long counters

[Oliver Upton]

Hi Ricardo,

On Tue, Dec 20, 2022 at 03:10:29AM +0000, Ricardo Koller wrote:
> PMUv3p5 uses 64-bit counters irrespective of whether the PMU is configured
> for overflowing at 32 or 64-bits. The consequence is that tests that check
> the counter values after overflowing should not assume that values will be
> wrapped around 32-bits: they overflow into the other half of the 64-bit
> counters on PMUv3p5.
> 
> Fix tests by correctly checking overflowing-counters against the expected
> 64-bit value.
> 
> Signed-off-by: Ricardo Koller <ricarkol@google.com>
> ---
>  arm/pmu.c | 37 +++++++++++++++++++++++++------------
>  1 file changed, 25 insertions(+), 12 deletions(-)
> 
> diff --git a/arm/pmu.c b/arm/pmu.c
> index cd47b14..1b55e20 100644
> --- a/arm/pmu.c
> +++ b/arm/pmu.c
> @@ -54,10 +54,13 @@
>  #define EXT_COMMON_EVENTS_LOW	0x4000
>  #define EXT_COMMON_EVENTS_HIGH	0x403F
>  
> -#define ALL_SET			0xFFFFFFFF
> -#define ALL_CLEAR		0x0
> -#define PRE_OVERFLOW		0xFFFFFFF0
> -#define PRE_OVERFLOW2		0xFFFFFFDC
> +#define ALL_SET			0x00000000FFFFFFFFULL
> +#define ALL_SET_64		0xFFFFFFFFFFFFFFFFULL
> +#define ALL_CLEAR		0x0000000000000000ULL
> +#define PRE_OVERFLOW		0x00000000FFFFFFF0ULL
> +#define PRE_OVERFLOW2		0x00000000FFFFFFDCULL
> +
> +#define ALL_SET_AT(_64b)       (_64b ? ALL_SET_64 : ALL_SET)

AFAICT, ALL_SET is mostly used to toggle all PMCs in a configuration
register. Using it for PMEVCNTR<n> seems a bit odd to me. How about
introducing a helper for getting the counter mask to avoid the
open-coded version check?

static uint64_t pmevcntr_mask(void)
{
	/*
	 * Bits [63:0] are always incremented for 64-bit counters,
	 * even if the PMU is configured to generate an overflow at
	 * bits [31:0]
	 *
	 * See DDI0487I.a, section D11.3 ("Behavior on overflow") for
	 * more details.
	 */
	if (pmu.version >= ID_DFR0_PMU_V3_8_5)
		return ~0;

	return (uint32_t)~0;
}

I've always found the PMU documentation to be a bit difficult to grok,
and the above citation only mentions the intended behavior in passing.
Please feel free to update with a better citation if it exists.

>  #define PMU_PPI			23
>  
> @@ -538,6 +541,7 @@ static void test_mem_access(void)
>  static void test_sw_incr(void)
>  {
>  	uint32_t events[] = {SW_INCR, SW_INCR};
> +	uint64_t cntr0;
>  	int i;
>  
>  	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
> @@ -572,9 +576,11 @@ static void test_sw_incr(void)
>  		write_sysreg(0x3, pmswinc_el0);
>  
>  	isb();
> -	report(read_regn_el0(pmevcntr, 0)  == 84, "counter #1 after + 100 SW_INCR");
> -	report(read_regn_el0(pmevcntr, 1)  == 100,
> -		"counter #0 after + 100 SW_INCR");
> +	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ?
> +		(uint32_t)PRE_OVERFLOW + 100 :
> +		(uint64_t)PRE_OVERFLOW + 100;

With the above suggestion, it would be nice to rewrite like so:

	cntr0 = (PRE_OVERFLOW + 100) & pmevcntr_mask();

If you do go this route, then you'll probably want to drop all the other
open-coded PMUv3p5 checks in favor of the helper.

--
Thanks,
Oliver

Re: [kvm-unit-tests PATCH v2 1/4] arm: pmu: Fix overflow checks for PMUv3p5 long counters

[Ricardo Koller]

On Fri, Jan 06, 2023 at 07:28:57PM +0000, Oliver Upton wrote:
> Hi Ricardo,
> 
> On Tue, Dec 20, 2022 at 03:10:29AM +0000, Ricardo Koller wrote:
> > PMUv3p5 uses 64-bit counters irrespective of whether the PMU is configured
> > for overflowing at 32 or 64-bits. The consequence is that tests that check
> > the counter values after overflowing should not assume that values will be
> > wrapped around 32-bits: they overflow into the other half of the 64-bit
> > counters on PMUv3p5.
> > 
> > Fix tests by correctly checking overflowing-counters against the expected
> > 64-bit value.
> > 
> > Signed-off-by: Ricardo Koller <ricarkol@google.com>
> > ---
> >  arm/pmu.c | 37 +++++++++++++++++++++++++------------
> >  1 file changed, 25 insertions(+), 12 deletions(-)
> > 
> > diff --git a/arm/pmu.c b/arm/pmu.c
> > index cd47b14..1b55e20 100644
> > --- a/arm/pmu.c
> > +++ b/arm/pmu.c
> > @@ -54,10 +54,13 @@
> >  #define EXT_COMMON_EVENTS_LOW	0x4000
> >  #define EXT_COMMON_EVENTS_HIGH	0x403F
> >  
> > -#define ALL_SET			0xFFFFFFFF
> > -#define ALL_CLEAR		0x0
> > -#define PRE_OVERFLOW		0xFFFFFFF0
> > -#define PRE_OVERFLOW2		0xFFFFFFDC
> > +#define ALL_SET			0x00000000FFFFFFFFULL
> > +#define ALL_SET_64		0xFFFFFFFFFFFFFFFFULL
> > +#define ALL_CLEAR		0x0000000000000000ULL
> > +#define PRE_OVERFLOW		0x00000000FFFFFFF0ULL
> > +#define PRE_OVERFLOW2		0x00000000FFFFFFDCULL
> > +
> > +#define ALL_SET_AT(_64b)       (_64b ? ALL_SET_64 : ALL_SET)
> 
> AFAICT, ALL_SET is mostly used to toggle all PMCs in a configuration
> register. 

It's also used as a pre-overflow counter value. And that's mainly the use of
the newly introduced ALL_SET_AT(), and PRE_OVERFLOW_AT(). The ALL_SET_AT()
changes in this commit should be moved to commit 3; I will do that plus use
pmevcntr_mask() instead of ALL_SET_AT():

	uint64_t all_set = pmevcntr_mask();
	...
	/* overflow on odd counter */
	write_regn_el0(pmevcntr, 0, pre_overflow);
	write_regn_el0(pmevcntr, 1, all_set);


> Using it for PMEVCNTR<n> seems a bit odd to me. How about
> introducing a helper for getting the counter mask to avoid the
> open-coded version check?
> 
> static uint64_t pmevcntr_mask(void)
> {
> 	/*
> 	 * Bits [63:0] are always incremented for 64-bit counters,
> 	 * even if the PMU is configured to generate an overflow at
> 	 * bits [31:0]
> 	 *
> 	 * See DDI0487I.a, section D11.3 ("Behavior on overflow") for
> 	 * more details.
> 	 */
> 	if (pmu.version >= ID_DFR0_PMU_V3_8_5)
> 		return ~0;
> 
> 	return (uint32_t)~0;
> }
> 
> I've always found the PMU documentation to be a bit difficult to grok,
> and the above citation only mentions the intended behavior in passing.
> Please feel free to update with a better citation if it exists.
> 
> >  #define PMU_PPI			23
> >  
> > @@ -538,6 +541,7 @@ static void test_mem_access(void)
> >  static void test_sw_incr(void)
> >  {
> >  	uint32_t events[] = {SW_INCR, SW_INCR};
> > +	uint64_t cntr0;
> >  	int i;
> >  
> >  	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
> > @@ -572,9 +576,11 @@ static void test_sw_incr(void)
> >  		write_sysreg(0x3, pmswinc_el0);
> >  
> >  	isb();
> > -	report(read_regn_el0(pmevcntr, 0)  == 84, "counter #1 after + 100 SW_INCR");
> > -	report(read_regn_el0(pmevcntr, 1)  == 100,
> > -		"counter #0 after + 100 SW_INCR");
> > +	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ?
> > +		(uint32_t)PRE_OVERFLOW + 100 :
> > +		(uint64_t)PRE_OVERFLOW + 100;
> 
> With the above suggestion, it would be nice to rewrite like so:
> 
> 	cntr0 = (PRE_OVERFLOW + 100) & pmevcntr_mask();
> 
> If you do go this route, then you'll probably want to drop all the other
> open-coded PMUv3p5 checks in favor of the helper.

Will also use this instead of the uintxx_t casting.

Thanks~
Ricardo

> 
> --
> Thanks,
> Oliver

Re: [kvm-unit-tests PATCH v2 1/4] arm: pmu: Fix overflow checks for PMUv3p5 long counters

[Ricardo Koller]

On Fri, Jan 06, 2023 at 07:28:57PM +0000, Oliver Upton wrote:
> Hi Ricardo,
> 
> On Tue, Dec 20, 2022 at 03:10:29AM +0000, Ricardo Koller wrote:
> > PMUv3p5 uses 64-bit counters irrespective of whether the PMU is configured
> > for overflowing at 32 or 64-bits. The consequence is that tests that check
> > the counter values after overflowing should not assume that values will be
> > wrapped around 32-bits: they overflow into the other half of the 64-bit
> > counters on PMUv3p5.
> > 
> > Fix tests by correctly checking overflowing-counters against the expected
> > 64-bit value.
> > 
> > Signed-off-by: Ricardo Koller <ricarkol@google.com>
> > ---
> >  arm/pmu.c | 37 +++++++++++++++++++++++++------------
> >  1 file changed, 25 insertions(+), 12 deletions(-)
> > 
> > diff --git a/arm/pmu.c b/arm/pmu.c
> > index cd47b14..1b55e20 100644
> > --- a/arm/pmu.c
> > +++ b/arm/pmu.c
> > @@ -54,10 +54,13 @@
> >  #define EXT_COMMON_EVENTS_LOW	0x4000
> >  #define EXT_COMMON_EVENTS_HIGH	0x403F
> >  
> > -#define ALL_SET			0xFFFFFFFF
> > -#define ALL_CLEAR		0x0
> > -#define PRE_OVERFLOW		0xFFFFFFF0
> > -#define PRE_OVERFLOW2		0xFFFFFFDC
> > +#define ALL_SET			0x00000000FFFFFFFFULL
> > +#define ALL_SET_64		0xFFFFFFFFFFFFFFFFULL
> > +#define ALL_CLEAR		0x0000000000000000ULL
> > +#define PRE_OVERFLOW		0x00000000FFFFFFF0ULL
> > +#define PRE_OVERFLOW2		0x00000000FFFFFFDCULL
> > +
> > +#define ALL_SET_AT(_64b)       (_64b ? ALL_SET_64 : ALL_SET)
> 
> AFAICT, ALL_SET is mostly used to toggle all PMCs in a configuration
> register. Using it for PMEVCNTR<n> seems a bit odd to me. How about
> introducing a helper for getting the counter mask to avoid the
> open-coded version check?
> 
> static uint64_t pmevcntr_mask(void)
> {
> 	/*
> 	 * Bits [63:0] are always incremented for 64-bit counters,
> 	 * even if the PMU is configured to generate an overflow at
> 	 * bits [31:0]
> 	 *
> 	 * See DDI0487I.a, section D11.3 ("Behavior on overflow") for
> 	 * more details.
> 	 */
> 	if (pmu.version >= ID_DFR0_PMU_V3_8_5)
> 		return ~0;
> 
> 	return (uint32_t)~0;
> }
> 
> I've always found the PMU documentation to be a bit difficult to grok,
> and the above citation only mentions the intended behavior in passing.
> Please feel free to update with a better citation if it exists.

For this particular case, "Bits [63:0] are always incremented for 64-bit
counters", I find AArch64.IncrementEventCounter() a bit easier.

> 
> >  #define PMU_PPI			23
> >  
> > @@ -538,6 +541,7 @@ static void test_mem_access(void)
> >  static void test_sw_incr(void)
> >  {
> >  	uint32_t events[] = {SW_INCR, SW_INCR};
> > +	uint64_t cntr0;
> >  	int i;
> >  
> >  	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
> > @@ -572,9 +576,11 @@ static void test_sw_incr(void)
> >  		write_sysreg(0x3, pmswinc_el0);
> >  
> >  	isb();
> > -	report(read_regn_el0(pmevcntr, 0)  == 84, "counter #1 after + 100 SW_INCR");
> > -	report(read_regn_el0(pmevcntr, 1)  == 100,
> > -		"counter #0 after + 100 SW_INCR");
> > +	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ?
> > +		(uint32_t)PRE_OVERFLOW + 100 :
> > +		(uint64_t)PRE_OVERFLOW + 100;
> 
> With the above suggestion, it would be nice to rewrite like so:
> 
> 	cntr0 = (PRE_OVERFLOW + 100) & pmevcntr_mask();
> 
> If you do go this route, then you'll probably want to drop all the other
> open-coded PMUv3p5 checks in favor of the helper.
> 
> --
> Thanks,
> Oliver

[kvm-unit-tests PATCH v2 2/4] arm: pmu: Prepare for testing 64-bit overflows

[Ricardo Koller]

PMUv3p5 adds a knob, PMCR_EL0.LP == 1, that allows overflowing at 64-bits
instead of 32. Prepare by doing these 3 things:

1. Add a "bool overflow_at_64bits" argument to all tests checking
   overflows.
2. Extend satisfy_prerequisites() to check if the machine supports
   "overflow_at_64bits".
3. Refactor the test invocations to use the new "run_test()" which adds a
   report prefix indicating whether the test uses 64 or 32-bit overflows.

A subsequent commit will actually add the 64-bit overflow tests.

Signed-off-by: Ricardo Koller <ricarkol@google.com>
---
 arm/pmu.c | 92 ++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 53 insertions(+), 39 deletions(-)

diff --git a/arm/pmu.c b/arm/pmu.c
index 1b55e20..4cd3790 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -167,13 +167,13 @@ static void pmu_reset(void)
 /* event counter tests only implemented for aarch64 */
 static void test_event_introspection(void) {}
 static void test_event_counter_config(void) {}
-static void test_basic_event_count(void) {}
-static void test_mem_access(void) {}
-static void test_sw_incr(void) {}
-static void test_chained_counters(void) {}
-static void test_chained_sw_incr(void) {}
-static void test_chain_promotion(void) {}
-static void test_overflow_interrupt(void) {}
+static void test_basic_event_count(bool overflow_at_64bits) {}
+static void test_mem_access(bool overflow_at_64bits) {}
+static void test_sw_incr(bool overflow_at_64bits) {}
+static void test_chained_counters(bool unused) {}
+static void test_chained_sw_incr(bool unused) {}
+static void test_chain_promotion(bool unused) {}
+static void test_overflow_interrupt(bool overflow_at_64bits) {}
 
 #elif defined(__aarch64__)
 #define ID_AA64DFR0_PERFMON_SHIFT 8
@@ -419,16 +419,28 @@ static bool satisfy_prerequisites(uint32_t *events, unsigned int nb_events)
 			return false;
 		}
 	}
+
+	return true;
+}
+
+static bool check_overflow_prerequisites(bool overflow_at_64bits)
+{
+	if (overflow_at_64bits && pmu.version < ID_DFR0_PMU_V3_8_5) {
+		report_skip("Skip test as 64 overflows need FEAT_PMUv3p5");
+		return false;
+	}
+
 	return true;
 }
 
-static void test_basic_event_count(void)
+static void test_basic_event_count(bool overflow_at_64bits)
 {
 	uint32_t implemented_counter_mask, non_implemented_counter_mask;
 	uint32_t counter_mask;
 	uint32_t events[] = {CPU_CYCLES, INST_RETIRED};
 
-	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)) ||
+	    !check_overflow_prerequisites(overflow_at_64bits))
 		return;
 
 	implemented_counter_mask = BIT(pmu.nb_implemented_counters) - 1;
@@ -502,12 +514,13 @@ static void test_basic_event_count(void)
 		"check overflow happened on #0 only");
 }
 
-static void test_mem_access(void)
+static void test_mem_access(bool overflow_at_64bits)
 {
 	void *addr = malloc(PAGE_SIZE);
 	uint32_t events[] = {MEM_ACCESS, MEM_ACCESS};
 
-	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)) ||
+	    !check_overflow_prerequisites(overflow_at_64bits))
 		return;
 
 	pmu_reset();
@@ -538,13 +551,14 @@ static void test_mem_access(void)
 			read_sysreg(pmovsclr_el0));
 }
 
-static void test_sw_incr(void)
+static void test_sw_incr(bool overflow_at_64bits)
 {
 	uint32_t events[] = {SW_INCR, SW_INCR};
 	uint64_t cntr0;
 	int i;
 
-	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)) ||
+	    !check_overflow_prerequisites(overflow_at_64bits))
 		return;
 
 	pmu_reset();
@@ -587,7 +601,7 @@ static void test_sw_incr(void)
 		"overflow on counter #0 after 100 SW_INCR");
 }
 
-static void test_chained_counters(void)
+static void test_chained_counters(bool unused)
 {
 	uint32_t events[] = {CPU_CYCLES, CHAIN};
 	uint64_t all_set = ALL_SET_AT(pmu.version >= ID_DFR0_PMU_V3_8_5);
@@ -630,7 +644,7 @@ static void test_chained_counters(void)
 	report(read_sysreg(pmovsclr_el0) == 0x3, "overflow on even and odd counters");
 }
 
-static void test_chained_sw_incr(void)
+static void test_chained_sw_incr(bool unused)
 {
 	uint32_t events[] = {SW_INCR, CHAIN};
 	uint64_t cntr0, cntr1;
@@ -686,7 +700,7 @@ static void test_chained_sw_incr(void)
 		    read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
 }
 
-static void test_chain_promotion(void)
+static void test_chain_promotion(bool unused)
 {
 	uint32_t events[] = {MEM_ACCESS, CHAIN};
 	void *addr = malloc(PAGE_SIZE);
@@ -835,13 +849,14 @@ static bool expect_interrupts(uint32_t bitmap)
 	return true;
 }
 
-static void test_overflow_interrupt(void)
+static void test_overflow_interrupt(bool overflow_at_64bits)
 {
 	uint32_t events[] = {MEM_ACCESS, SW_INCR};
 	void *addr = malloc(PAGE_SIZE);
 	int i;
 
-	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)) ||
+	    !check_overflow_prerequisites(overflow_at_64bits))
 		return;
 
 	gic_enable_defaults();
@@ -1065,6 +1080,19 @@ static bool pmu_probe(void)
 	return true;
 }
 
+static void run_test(char *name, void (*test)(bool), bool overflow_at_64bits)
+{
+	const char *prefix = overflow_at_64bits ? "64-bit overflows" : "32-bit overflows";
+
+	report_prefix_push(name);
+	report_prefix_push(prefix);
+
+	test(overflow_at_64bits);
+
+	report_prefix_pop();
+	report_prefix_pop();
+}
+
 int main(int argc, char *argv[])
 {
 	int cpi = 0;
@@ -1097,33 +1125,19 @@ int main(int argc, char *argv[])
 		test_event_counter_config();
 		report_prefix_pop();
 	} else if (strcmp(argv[1], "pmu-basic-event-count") == 0) {
-		report_prefix_push(argv[1]);
-		test_basic_event_count();
-		report_prefix_pop();
+		run_test(argv[1], test_basic_event_count, false);
 	} else if (strcmp(argv[1], "pmu-mem-access") == 0) {
-		report_prefix_push(argv[1]);
-		test_mem_access();
-		report_prefix_pop();
+		run_test(argv[1], test_mem_access, false);
 	} else if (strcmp(argv[1], "pmu-sw-incr") == 0) {
-		report_prefix_push(argv[1]);
-		test_sw_incr();
-		report_prefix_pop();
+		run_test(argv[1], test_sw_incr, false);
 	} else if (strcmp(argv[1], "pmu-chained-counters") == 0) {
-		report_prefix_push(argv[1]);
-		test_chained_counters();
-		report_prefix_pop();
+		run_test(argv[1], test_chained_counters, false);
 	} else if (strcmp(argv[1], "pmu-chained-sw-incr") == 0) {
-		report_prefix_push(argv[1]);
-		test_chained_sw_incr();
-		report_prefix_pop();
+		run_test(argv[1], test_chained_sw_incr, false);
 	} else if (strcmp(argv[1], "pmu-chain-promotion") == 0) {
-		report_prefix_push(argv[1]);
-		test_chain_promotion();
-		report_prefix_pop();
+		run_test(argv[1], test_chain_promotion, false);
 	} else if (strcmp(argv[1], "pmu-overflow-interrupt") == 0) {
-		report_prefix_push(argv[1]);
-		test_overflow_interrupt();
-		report_prefix_pop();
+		run_test(argv[1], test_overflow_interrupt, false);
 	} else {
 		report_abort("Unknown sub-test '%s'", argv[1]);
 	}
-- 
2.39.0.314.g84b9a713c41-goog

[kvm-unit-tests PATCH v2 3/4] arm: pmu: Add tests for 64-bit overflows

[Ricardo Koller]

Modify all tests checking overflows to support both 32 (PMCR_EL0.LP == 0)
and 64-bit overflows (PMCR_EL0.LP == 1). 64-bit overflows are only
supported on PMUv3p5.

Note that chained tests do not implement "overflow_at_64bits == true".
That's because there are no CHAIN events when "PMCR_EL0.LP == 1" (for more
details see AArch64.IncrementEventCounter() pseudocode in the ARM ARM DDI
0487H.a, J1.1.1 "aarch64/debug").

Signed-off-by: Ricardo Koller <ricarkol@google.com>
---
 arm/pmu.c | 97 ++++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 64 insertions(+), 33 deletions(-)

diff --git a/arm/pmu.c b/arm/pmu.c
index 4cd3790..680623d 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -28,6 +28,7 @@
 #define PMU_PMCR_X         (1 << 4)
 #define PMU_PMCR_DP        (1 << 5)
 #define PMU_PMCR_LC        (1 << 6)
+#define PMU_PMCR_LP        (1 << 7)
 #define PMU_PMCR_N_SHIFT   11
 #define PMU_PMCR_N_MASK    0x1f
 #define PMU_PMCR_ID_SHIFT  16
@@ -58,9 +59,11 @@
 #define ALL_SET_64		0xFFFFFFFFFFFFFFFFULL
 #define ALL_CLEAR		0x0000000000000000ULL
 #define PRE_OVERFLOW		0x00000000FFFFFFF0ULL
+#define PRE_OVERFLOW_64		0xFFFFFFFFFFFFFFF0ULL
 #define PRE_OVERFLOW2		0x00000000FFFFFFDCULL
 
-#define ALL_SET_AT(_64b)       (_64b ? ALL_SET_64 : ALL_SET)
+#define PRE_OVERFLOW_AT(_64b)	(_64b ? PRE_OVERFLOW_64 : PRE_OVERFLOW)
+#define ALL_SET_AT(_64b)	(_64b ? ALL_SET_64 : ALL_SET)
 
 #define PMU_PPI			23
 
@@ -436,8 +439,10 @@ static bool check_overflow_prerequisites(bool overflow_at_64bits)
 static void test_basic_event_count(bool overflow_at_64bits)
 {
 	uint32_t implemented_counter_mask, non_implemented_counter_mask;
-	uint32_t counter_mask;
+	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
+	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
 	uint32_t events[] = {CPU_CYCLES, INST_RETIRED};
+	uint32_t counter_mask;
 
 	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)) ||
 	    !check_overflow_prerequisites(overflow_at_64bits))
@@ -459,13 +464,13 @@ static void test_basic_event_count(bool overflow_at_64bits)
 	 * clear cycle and all event counters and allow counter enablement
 	 * through PMCNTENSET. LC is RES1.
 	 */
-	set_pmcr(pmu.pmcr_ro | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_P);
+	set_pmcr(pmu.pmcr_ro | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_P | pmcr_lp);
 	isb();
-	report(get_pmcr() == (pmu.pmcr_ro | PMU_PMCR_LC), "pmcr: reset counters");
+	report(get_pmcr() == (pmu.pmcr_ro | PMU_PMCR_LC | pmcr_lp), "pmcr: reset counters");
 
 	/* Preset counter #0 to pre overflow value to trigger an overflow */
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
-	report(read_regn_el0(pmevcntr, 0) == PRE_OVERFLOW,
+	write_regn_el0(pmevcntr, 0, pre_overflow);
+	report(read_regn_el0(pmevcntr, 0) == pre_overflow,
 		"counter #0 preset to pre-overflow value");
 	report(!read_regn_el0(pmevcntr, 1), "counter #1 is 0");
 
@@ -518,6 +523,8 @@ static void test_mem_access(bool overflow_at_64bits)
 {
 	void *addr = malloc(PAGE_SIZE);
 	uint32_t events[] = {MEM_ACCESS, MEM_ACCESS};
+	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
+	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
 
 	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)) ||
 	    !check_overflow_prerequisites(overflow_at_64bits))
@@ -529,7 +536,7 @@ static void test_mem_access(bool overflow_at_64bits)
 	write_regn_el0(pmevtyper, 1, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
 	write_sysreg_s(0x3, PMCNTENSET_EL0);
 	isb();
-	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
+	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	report_info("counter #0 is %ld (MEM_ACCESS)", read_regn_el0(pmevcntr, 0));
 	report_info("counter #1 is %ld (MEM_ACCESS)", read_regn_el0(pmevcntr, 1));
 	/* We may measure more than 20 mem access depending on the core */
@@ -539,11 +546,11 @@ static void test_mem_access(bool overflow_at_64bits)
 
 	pmu_reset();
 
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
-	write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
+	write_regn_el0(pmevcntr, 1, pre_overflow);
 	write_sysreg_s(0x3, PMCNTENSET_EL0);
 	isb();
-	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
+	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	report(read_sysreg(pmovsclr_el0) == 0x3,
 	       "Ran 20 mem accesses with expected overflows on both counters");
 	report_info("cnt#0 = %ld cnt#1=%ld overflow=0x%lx",
@@ -553,6 +560,8 @@ static void test_mem_access(bool overflow_at_64bits)
 
 static void test_sw_incr(bool overflow_at_64bits)
 {
+	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
+	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
 	uint32_t events[] = {SW_INCR, SW_INCR};
 	uint64_t cntr0;
 	int i;
@@ -568,7 +577,7 @@ static void test_sw_incr(bool overflow_at_64bits)
 	/* enable counters #0 and #1 */
 	write_sysreg_s(0x3, PMCNTENSET_EL0);
 
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
 	isb();
 
 	for (i = 0; i < 100; i++)
@@ -576,14 +585,14 @@ static void test_sw_incr(bool overflow_at_64bits)
 
 	isb();
 	report_info("SW_INCR counter #0 has value %ld", read_regn_el0(pmevcntr, 0));
-	report(read_regn_el0(pmevcntr, 0) == PRE_OVERFLOW,
+	report(read_regn_el0(pmevcntr, 0) == pre_overflow,
 		"PWSYNC does not increment if PMCR.E is unset");
 
 	pmu_reset();
 
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
 	write_sysreg_s(0x3, PMCNTENSET_EL0);
-	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
+	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	isb();
 
 	for (i = 0; i < 100; i++)
@@ -591,8 +600,8 @@ static void test_sw_incr(bool overflow_at_64bits)
 
 	isb();
 	cntr0 = (pmu.version < ID_DFR0_PMU_V3_8_5) ?
-		(uint32_t)PRE_OVERFLOW + 100 :
-		(uint64_t)PRE_OVERFLOW + 100;
+		(uint32_t)pre_overflow + 100 :
+		(uint64_t)pre_overflow + 100;
 	report(read_regn_el0(pmevcntr, 0) == cntr0, "counter #0 after + 100 SW_INCR");
 	report(read_regn_el0(pmevcntr, 1) == 100, "counter #1 after + 100 SW_INCR");
 	report_info("counter values after 100 SW_INCR #0=%ld #1=%ld",
@@ -851,6 +860,9 @@ static bool expect_interrupts(uint32_t bitmap)
 
 static void test_overflow_interrupt(bool overflow_at_64bits)
 {
+	uint64_t pre_overflow = PRE_OVERFLOW_AT(overflow_at_64bits);
+	uint64_t all_set = ALL_SET_AT(overflow_at_64bits);
+	uint64_t pmcr_lp = overflow_at_64bits ? PMU_PMCR_LP : 0;
 	uint32_t events[] = {MEM_ACCESS, SW_INCR};
 	void *addr = malloc(PAGE_SIZE);
 	int i;
@@ -869,16 +881,16 @@ static void test_overflow_interrupt(bool overflow_at_64bits)
 	write_regn_el0(pmevtyper, 0, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
 	write_regn_el0(pmevtyper, 1, SW_INCR | PMEVTYPER_EXCLUDE_EL0);
 	write_sysreg_s(0x3, PMCNTENSET_EL0);
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
-	write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
+	write_regn_el0(pmevcntr, 1, pre_overflow);
 	isb();
 
 	/* interrupts are disabled (PMINTENSET_EL1 == 0) */
 
-	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
+	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	report(expect_interrupts(0), "no overflow interrupt after preset");
 
-	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
+	set_pmcr(pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	isb();
 
 	for (i = 0; i < 100; i++)
@@ -893,12 +905,12 @@ static void test_overflow_interrupt(bool overflow_at_64bits)
 
 	pmu_reset_stats();
 
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
-	write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
+	write_regn_el0(pmevcntr, 1, pre_overflow);
 	write_sysreg(ALL_SET, pmintenset_el1);
 	isb();
 
-	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
+	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	for (i = 0; i < 100; i++)
 		write_sysreg(0x3, pmswinc_el0);
 
@@ -907,25 +919,40 @@ static void test_overflow_interrupt(bool overflow_at_64bits)
 	report(expect_interrupts(0x3),
 		"overflow interrupts expected on #0 and #1");
 
-	/* promote to 64-b */
+	/*
+	 * promote to 64-b:
+	 *
+	 * This only applies to the !overflow_at_64bits case, as
+	 * overflow_at_64bits doesn't implement CHAIN events. The
+	 * overflow_at_64bits case just checks that chained counters are
+	 * not incremented when PMCR.LP == 1.
+	 */
 
 	pmu_reset_stats();
 
 	write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
 	isb();
-	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
-	report(expect_interrupts(0x1),
-		"expect overflow interrupt on 32b boundary");
+	mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
+	report(expect_interrupts(0x1), "expect overflow interrupt");
 
 	/* overflow on odd counter */
 	pmu_reset_stats();
-	write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
-	write_regn_el0(pmevcntr, 1, ALL_SET);
+	write_regn_el0(pmevcntr, 0, pre_overflow);
+	write_regn_el0(pmevcntr, 1, all_set);
 	isb();
-	mem_access_loop(addr, 400, pmu.pmcr_ro | PMU_PMCR_E);
-	report(expect_interrupts(0x3),
-		"expect overflow interrupt on even and odd counter");
+	mem_access_loop(addr, 400, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
+	if (overflow_at_64bits) {
+		report(expect_interrupts(0x1),
+		       "expect overflow interrupt on even counter");
+		report(read_regn_el0(pmevcntr, 1) == all_set,
+		       "Odd counter did not change");
+	} else {
+		report(expect_interrupts(0x3),
+		       "expect overflow interrupt on even and odd counter");
+		report(read_regn_el0(pmevcntr, 1) != all_set,
+		       "Odd counter wrapped");
+	}
 }
 #endif
 
@@ -1126,10 +1153,13 @@ int main(int argc, char *argv[])
 		report_prefix_pop();
 	} else if (strcmp(argv[1], "pmu-basic-event-count") == 0) {
 		run_test(argv[1], test_basic_event_count, false);
+		run_test(argv[1], test_basic_event_count, true);
 	} else if (strcmp(argv[1], "pmu-mem-access") == 0) {
 		run_test(argv[1], test_mem_access, false);
+		run_test(argv[1], test_mem_access, true);
 	} else if (strcmp(argv[1], "pmu-sw-incr") == 0) {
 		run_test(argv[1], test_sw_incr, false);
+		run_test(argv[1], test_sw_incr, true);
 	} else if (strcmp(argv[1], "pmu-chained-counters") == 0) {
 		run_test(argv[1], test_chained_counters, false);
 	} else if (strcmp(argv[1], "pmu-chained-sw-incr") == 0) {
@@ -1138,6 +1168,7 @@ int main(int argc, char *argv[])
 		run_test(argv[1], test_chain_promotion, false);
 	} else if (strcmp(argv[1], "pmu-overflow-interrupt") == 0) {
 		run_test(argv[1], test_overflow_interrupt, false);
+		run_test(argv[1], test_overflow_interrupt, true);
 	} else {
 		report_abort("Unknown sub-test '%s'", argv[1]);
 	}
-- 
2.39.0.314.g84b9a713c41-goog

[kvm-unit-tests PATCH v2 4/4] arm: pmu: Print counter values as hexadecimals

[Ricardo Koller]

The arm/pmu test prints the value of counters as %ld.  Most tests start
with counters around 0 or UINT_MAX, so having something like -16 instead of
0xffff_fff0 is not very useful.

Report counter values as hexadecimals.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
---
 arm/pmu.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arm/pmu.c b/arm/pmu.c
index 680623d..b6b2871 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -537,8 +537,8 @@ static void test_mem_access(bool overflow_at_64bits)
 	write_sysreg_s(0x3, PMCNTENSET_EL0);
 	isb();
 	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
-	report_info("counter #0 is %ld (MEM_ACCESS)", read_regn_el0(pmevcntr, 0));
-	report_info("counter #1 is %ld (MEM_ACCESS)", read_regn_el0(pmevcntr, 1));
+	report_info("counter #0 is 0x%lx (MEM_ACCESS)", read_regn_el0(pmevcntr, 0));
+	report_info("counter #1 is 0x%lx (MEM_ACCESS)", read_regn_el0(pmevcntr, 1));
 	/* We may measure more than 20 mem access depending on the core */
 	report((read_regn_el0(pmevcntr, 0) == read_regn_el0(pmevcntr, 1)) &&
 	       (read_regn_el0(pmevcntr, 0) >= 20) && !read_sysreg(pmovsclr_el0),
@@ -553,7 +553,7 @@ static void test_mem_access(bool overflow_at_64bits)
 	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E | pmcr_lp);
 	report(read_sysreg(pmovsclr_el0) == 0x3,
 	       "Ran 20 mem accesses with expected overflows on both counters");
-	report_info("cnt#0 = %ld cnt#1=%ld overflow=0x%lx",
+	report_info("cnt#0=0x%lx cnt#1=0x%lx overflow=0x%lx",
 			read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1),
 			read_sysreg(pmovsclr_el0));
 }
@@ -584,7 +584,7 @@ static void test_sw_incr(bool overflow_at_64bits)
 		write_sysreg(0x1, pmswinc_el0);
 
 	isb();
-	report_info("SW_INCR counter #0 has value %ld", read_regn_el0(pmevcntr, 0));
+	report_info("SW_INCR counter #0 has value 0x%lx", read_regn_el0(pmevcntr, 0));
 	report(read_regn_el0(pmevcntr, 0) == pre_overflow,
 		"PWSYNC does not increment if PMCR.E is unset");
 
@@ -604,7 +604,7 @@ static void test_sw_incr(bool overflow_at_64bits)
 		(uint64_t)pre_overflow + 100;
 	report(read_regn_el0(pmevcntr, 0) == cntr0, "counter #0 after + 100 SW_INCR");
 	report(read_regn_el0(pmevcntr, 1) == 100, "counter #1 after + 100 SW_INCR");
-	report_info("counter values after 100 SW_INCR #0=%ld #1=%ld",
+	report_info("counter values after 100 SW_INCR #0=0x%lx #1=0x%lx",
 		    read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
 	report(read_sysreg(pmovsclr_el0) == 0x1,
 		"overflow on counter #0 after 100 SW_INCR");
@@ -680,7 +680,7 @@ static void test_chained_sw_incr(bool unused)
 	report((read_sysreg(pmovsclr_el0) == 0x1) &&
 		(read_regn_el0(pmevcntr, 1) == 1),
 		"overflow and chain counter incremented after 100 SW_INCR/CHAIN");
-	report_info("overflow=0x%lx, #0=%ld #1=%ld", read_sysreg(pmovsclr_el0),
+	report_info("overflow=0x%lx, #0=0x%lx #1=0x%lx", read_sysreg(pmovsclr_el0),
 		    read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
 
 	/* 64b SW_INCR and overflow on CHAIN counter*/
@@ -705,7 +705,7 @@ static void test_chained_sw_incr(bool unused)
 	       (read_regn_el0(pmevcntr, 0) == cntr0) &&
 	       (read_regn_el0(pmevcntr, 1) == cntr1),
 	       "expected overflows and values after 100 SW_INCR/CHAIN");
-	report_info("overflow=0x%lx, #0=%ld #1=%ld", read_sysreg(pmovsclr_el0),
+	report_info("overflow=0x%lx, #0=0x%lx #1=0x%lx", read_sysreg(pmovsclr_el0),
 		    read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
 }
 
@@ -737,11 +737,11 @@ static void test_chain_promotion(bool unused)
 	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
 	report(!read_regn_el0(pmevcntr, 1) && (read_sysreg(pmovsclr_el0) == 0x1),
 		"odd counter did not increment on overflow if disabled");
-	report_info("MEM_ACCESS counter #0 has value %ld",
+	report_info("MEM_ACCESS counter #0 has value 0x%lx",
 		    read_regn_el0(pmevcntr, 0));
-	report_info("CHAIN counter #1 has value %ld",
+	report_info("CHAIN counter #1 has value 0x%lx",
 		    read_regn_el0(pmevcntr, 1));
-	report_info("overflow counter %ld", read_sysreg(pmovsclr_el0));
+	report_info("overflow counter 0x%lx", read_sysreg(pmovsclr_el0));
 
 	/* start at 0xFFFFFFDC, +20 with CHAIN enabled, +20 with CHAIN disabled */
 	pmu_reset();
-- 
2.39.0.314.g84b9a713c41-goog