From: Alexandru Elisei <alexandru.elisei@arm.com>
To: 何琼 <heqiong1557@phytium.com.cn>
Cc: kvm <kvm@vger.kernel.org>
Subject: Re: [kvm-unit-tests 1/1] arm64: microbench: Move the read of the count register and the ISB operation out of the while loop
Date: Wed, 1 Nov 2023 11:04:23 +0000 [thread overview]
Message-ID: <ZUIwt6jWBN037XVf@monolith> (raw)
In-Reply-To: <7ac00102.1c5.18b89fcf84f.Coremail.heqiong1557@phytium.com.cn>
Hi,
Comments on the patch itself.
On Wed, Nov 01, 2023 at 04:25:39PM +0800, 何琼 wrote:
> hi,
>
> This patch mainly includes the following content.
>
> Reducing the impact of the cntvct_el0 register and isb() operation on microbenchmark test results to improve testing accuracy and reduce latency in test results.
>
>
>
>
>
>
>
> Test in kunpeng920,
>
> Test results before applying the patch:
>
> [root@localhost tests]# ./micro-bench
>
>
> BUILD_HEAD=767629ca
>
>
> Test marked not to be run by default, are you sure (y/N)? y
>
>
> timeout -k 1s --foreground 90s numactl -C 0-3 -m 0 /usr/libexec/qemu-kvm -nodefaults -machine virt,gic-version=host -accel kvm -cpu host -device virtio-serial-device -device virtconsole,chardev=ctd -chardev testdev,id=ctd -device pci-testdev -display none -serial stdio -kernel /tmp/tmp.y4c4YHIprP -smp 2 # -initrd /tmp/tmp.KLLmjTuq2d
>
>
> Timer Frequency 100000000 Hz (Output in microseconds)
>
>
>
>
>
> name total ns avg ns
>
>
> --------------------------------------------------------------------------------------------
>
>
> hvc 26774980.0 408.0
>
>
> mmio_read_user 151183350.0 2306.0
>
>
> mmio_read_vgic 41849830.0 638.0
>
>
> eoi 1735610.0 26.0
>
>
> ipi 111260770.0 1697.0
>
>
> ipi_hw test skipped
>
>
> lpi 142124570.0 2168.0
>
>
> timer_10ms 466660.0 1822.0
>
>
>
>
>
> EXIT: STATUS=1
>
>
> PASS micro-bench
>
>
> [root@localhost tests]#
>
>
>
>
>
> Test results after applying the patch:
>
> [root@localhost kvm-unit-tests]# cd tests/
>
>
> [root@localhost tests]# ./micro-bench
>
>
> BUILD_HEAD=767629ca
>
>
> Test marked not to be run by default, are you sure (y/N)? y
>
>
> timeout -k 1s --foreground 90s numactl -C 0-3 -m 0 /usr/libexec/qemu-kvm -nodefaults -machine virt,gic-version=host -accel kvm -cpu host -device virtio-serial-device -device virtconsole,chardev=ctd -chardev testdev,id=ctd -device pci-testdev -display none -serial stdio -kernel /tmp/tmp.FiBID6KLxB -smp 2 # -initrd /tmp/tmp.oSKZeugleF
>
>
> Timer Frequency 100000000 Hz (Output in microseconds)
>
>
>
>
>
> name total ns avg ns
>
>
> --------------------------------------------------------------------------------------------
>
>
> hvc 26721040.0 407.0
>
>
> mmio_read_user 150824560.0 2301.0
>
>
> mmio_read_vgic 41845380.0 638.0
>
>
> eoi 1109180.0 16.0
>
>
> ipi 106062150.0 1618.0
>
>
> ipi_hw test skipped
>
>
> lpi 141700760.0 2162.0
>
>
> timer_10ms 470870.0 1839.0
>
>
>
>
>
> EXIT: STATUS=1
>
>
> PASS micro-bench
>
>
> [root@localhost tests]#
>
>
>
>
>
>
>
>
> Test in phytium S2500,
>
> Test results before applying the patch:
>
> [root@primecontroller tests]# ./micro-bench
>
>
> BUILD_HEAD=518cd47c
>
>
> Test marked not to be run by default, are you sure (y/N)? y
>
>
> timeout -k 1s --foreground 90s numactl -C 0-3 -m 0 /usr/local/bin/qemu-system-aarch64 -nodefaults -machine virt,gic-version=host -accel kvm -cpu host -device virtio-serial-device -device virtconsole,chardev=ctd -chardev testdev,id=ctd -device pci-testdev -display none -serial stdio -kernel /tmp/tmp.lrJJqSuLmN -smp 2 # -initrd /tmp/tmp.s18C3k2jfO
>
>
> Timer Frequency 50000000 Hz (Output in microseconds)
>
>
>
>
>
> name total ns avg ns
>
>
> --------------------------------------------------------------------------------------------
>
>
> hvc 100668780.0 1536.0
>
>
> mmio_read_user 472806800.0 7214.0
>
>
> mmio_read_vgic 140912320.0 2150.0
>
>
> eoi 2972280.0 45.0
>
>
> ipi 326332780.0 4979.0
>
>
> ipi_hw test skipped
>
>
> lpi 359226600.0 5481.0
>
>
> timer_10ms 1271960.0 4968.0
>
>
>
>
>
> EXIT: STATUS=1
>
>
> PASS micro-bench
>
>
> [root@primecontroller tests]#
>
>
>
>
>
>
>
>
> Test results after applying the patch:
>
> [root@primecontroller tests]# ./micro-bench
>
>
> BUILD_HEAD=518cd47c
>
>
> Test marked not to be run by default, are you sure (y/N)? y
>
>
> timeout -k 1s --foreground 90s numactl -C 0-3 -m 0 /usr/local/bin/qemu-system-aarch64 -nodefaults -machine virt,gic-version=host -accel kvm -cpu host -device virtio-serial-device -device virtconsole,chardev=ctd -chardev testdev,id=ctd -device pci-testdev -display none -serial stdio -kernel /tmp/tmp.IsEtcs1W1g -smp 2 # -initrd /tmp/tmp.885IpeoGw4
>
>
> Timer Frequency 50000000 Hz (Output in microseconds)
>
>
>
>
>
> name total ns avg ns
>
>
> --------------------------------------------------------------------------------------------
>
>
> hvc 99490080.0 1518.0
>
>
> mmio_read_user 474781300.0 7244.0
>
>
> mmio_read_vgic 140470760.0 2143.0
>
>
> eoi 1693260.0 25.0
>
>
> ipi 323551200.0 4936.0
>
>
> ipi_hw test skipped
>
>
> lpi 355690620.0 5427.0
>
>
> timer_10ms 1318540.0 5150.0
>
>
>
>
>
> EXIT: STATUS=1
>
>
> PASS micro-bench
>
>
> [root@primecontroller tests]#
>
>
>
>
>
>
>
>
>
> From 518cd47c33fce60ef86ed66dfa9e904b66499933 Mon Sep 17 00:00:00 2001
> From: heqiong <heqiong1557@phytium.com.cn>
> Date: Wed, 1 Nov 2023 15:06:28 +0800
> Subject: [kvm-unit-tests 1/1] arm64: microbench: Move the read of the count
> register and the ISB operation out of the while loop
>
> Reducing the impact of the cntvct_el0 register and isb() operation
> on microbenchmark test results to improve testing accuracy and reduce
> latency in test results.
> ---
> arm/micro-bench.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/arm/micro-bench.c b/arm/micro-bench.c
> index fbe59d03..ee5b9ca0 100644
> --- a/arm/micro-bench.c
> +++ b/arm/micro-bench.c
> @@ -346,17 +346,18 @@ static void loop_test(struct exit_test *test)
> }
> }
>
> + start = read_sysreg(cntpct_el0);
> + isb();
> while (ntimes < test->times && total_ns.ns < NS_5_SECONDS) {
> - isb();
> - start = read_sysreg(cntvct_el0);
> test->exec();
> - isb();
> - end = read_sysreg(cntvct_el0);
>
> ntimes++;
> - total_ticks += (end - start);
> - ticks_to_ns_time(total_ticks, &total_ns);
> }
> + isb();
> + end = read_sysreg(cntpct_el0);
> +
> + total_ticks = end - start;
> + ticks_to_ns_time(total_ticks, &total_ns);
A few notes:
* The counter that is being used has been changed from the physical to the
virtual counter. Accesses to the physical counter trap on nVHE systems.
That might not be desirable if what you're after is to reduce latency.
* You need an ISB before reading 'start', otherwise the counter read might be
reworded earlier in program order.
* Memory loads or stores are not order by using an ISB. If there are memory
accesses before 'start' is read, you probably want them to be finished before
the counter is read. Similarly, I don't think there are any restrictions on
what the test->exec() function is allowed to do, so there might be memory
accesses as part of the test.
I suggest something like this:
dsb(); // Wait for loads and stores to complete.
isb(); // Order the counter read after the DSB.
start = read_sysreg(cntvct_el0);
isb(); // Order the counter read before the loop.
// No DSB needed, as per ARM DDI 0487J.a, page D11-5991.
/* test loop */
dsb(); // Wait for loads and stores to complete.
isb(); // Order the counter read after the DSB.
end = read_sysreg(cnvct_el0);
// No DSB or ISB needed, as per ARM DDI 0487J.a, page D11-5991.
Thanks,
Alex
>
> if (test->post) {
> test->post(ntimes, &total_ticks);
> --
> 2.31.1
>
next prev parent reply other threads:[~2023-11-01 11:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-01 8:25 [kvm-unit-tests 1/1] arm64: microbench: Move the read of the count register and the ISB operation out of the while loop 何琼
2023-11-01 10:06 ` Andrew Jones
2023-11-01 11:04 ` Alexandru Elisei [this message]
2023-11-02 7:40 ` 回复: " 何琼
2023-11-02 7:59 ` Yi Liu
-- strict thread matches above, loose matches on Subject: below --
2023-11-07 6:40 heqiong
2023-11-07 8:40 ` Andrew Jones
2023-11-07 9:07 ` Alexandru Elisei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZUIwt6jWBN037XVf@monolith \
--to=alexandru.elisei@arm.com \
--cc=heqiong1557@phytium.com.cn \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).