From: Oliver Upton <oliver.upton@linux.dev>
To: Marc Zyngier <maz@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>,
kvmarm@lists.linux.dev, kvm@vger.kernel.org,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 04/10] KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list()
Date: Sun, 18 Feb 2024 10:05:37 -0800 [thread overview]
Message-ID: <ZdJG8W-TLW8I6O07@linux.dev> (raw)
In-Reply-To: <86frxq3w3g.wl-maz@kernel.org>
On Sun, Feb 18, 2024 at 10:28:19AM +0000, Marc Zyngier wrote:
> On Sun, 18 Feb 2024 08:46:53 +0000,
> Zenghui Yu <yuzenghui@huawei.com> wrote:
> >
> > On 2024/2/17 2:41, Oliver Upton wrote:
> > > Start iterating the LPI xarray in anticipation of removing the LPI
> > > linked-list.
> > >
> > > Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
> > > ---
> > > arch/arm64/kvm/vgic/vgic-its.c | 7 ++++++-
> > > 1 file changed, 6 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
> > > index fb2d3c356984..9ce2edfadd11 100644
> > > --- a/arch/arm64/kvm/vgic/vgic-its.c
> > > +++ b/arch/arm64/kvm/vgic/vgic-its.c
> > > @@ -335,6 +335,7 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
> > > int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
> > > {
> > > struct vgic_dist *dist = &kvm->arch.vgic;
> > > + XA_STATE(xas, &dist->lpi_xa, GIC_LPI_OFFSET);
> > > struct vgic_irq *irq;
> > > unsigned long flags;
> > > u32 *intids;
> > > @@ -353,7 +354,9 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
> > > return -ENOMEM;
> > > raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
> > > - list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
> > > + rcu_read_lock();
> > > +
> > > + xas_for_each(&xas, irq, INTERRUPT_ID_BITS_ITS) {
> >
> > We should use '1 << INTERRUPT_ID_BITS_ITS - 1' to represent the maximum
> > LPI interrupt ID.
/facepalm
Thanks Zenghui!
> Huh, well caught! I'm not even sure how it works, as that's way
> smaller than the start of the walk (8192). Probably doesn't.
>
> An alternative would be to use max_lpis_propbaser(), but I'm not sure
> we always have a valid PROPBASER value set when we start using this
> function. Worth investigating though.
Given the plans to eventually replace this with xarray marks, I'd vote
for doing the lazy thing and deciding this at compile time.
I can squash this in when I apply the series if the rest of it isn't
offensive, otherwise respin with the change.
--
Thanks,
Oliver
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index d84cb7618c59..f6025886071c 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -316,6 +316,8 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
return 0;
}
+#define GIC_LPI_MAX_INTID ((1 << INTERRUPT_ID_BITS_ITS) - 1)
+
/*
* Create a snapshot of the current LPIs targeting @vcpu, so that we can
* enumerate those LPIs without holding any lock.
@@ -345,7 +347,7 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
rcu_read_lock();
- xas_for_each(&xas, irq, INTERRUPT_ID_BITS_ITS) {
+ xas_for_each(&xas, irq, GIC_LPI_MAX_INTID) {
if (i == irq_count)
break;
/* We don't need to "get" the IRQ, as we hold the list lock. */
next prev parent reply other threads:[~2024-02-18 18:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-16 18:41 [PATCH v3 00/10] KVM: arm64: Avoid serializing LPI get() / put() Oliver Upton
2024-02-16 18:41 ` [PATCH v3 01/10] KVM: arm64: vgic: Store LPIs in an xarray Oliver Upton
2024-02-20 16:30 ` Zenghui Yu
2024-02-20 17:15 ` Oliver Upton
2024-02-21 5:11 ` Zenghui Yu
2024-02-21 5:13 ` Oliver Upton
2024-02-20 17:24 ` Marc Zyngier
2024-02-20 17:43 ` Oliver Upton
2024-02-20 17:53 ` Marc Zyngier
2024-02-20 17:57 ` Oliver Upton
2024-02-16 18:41 ` [PATCH v3 02/10] KVM: arm64: vgic: Use xarray to find LPI in vgic_get_lpi() Oliver Upton
2024-02-16 18:41 ` [PATCH v3 03/10] KVM: arm64: vgic-v3: Iterate the xarray to find pending LPIs Oliver Upton
2024-02-16 18:41 ` [PATCH v3 04/10] KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list() Oliver Upton
2024-02-18 8:46 ` Zenghui Yu
2024-02-18 10:28 ` Marc Zyngier
2024-02-18 18:05 ` Oliver Upton [this message]
2024-02-16 18:41 ` [PATCH v3 05/10] KVM: arm64: vgic: Get rid of the LPI linked-list Oliver Upton
2024-02-16 18:41 ` [PATCH v3 06/10] KVM: arm64: vgic: Use atomics to count LPIs Oliver Upton
2024-02-16 18:41 ` [PATCH v3 07/10] KVM: arm64: vgic: Free LPI vgic_irq structs in an RCU-safe manner Oliver Upton
2024-02-16 18:41 ` [PATCH v3 08/10] KVM: arm64: vgic: Rely on RCU protection in vgic_get_lpi() Oliver Upton
2024-02-16 18:41 ` [PATCH v3 09/10] KVM: arm64: vgic: Ensure the irq refcount is nonzero when taking a ref Oliver Upton
2024-02-16 18:41 ` [PATCH v3 10/10] KVM: arm64: vgic: Don't acquire the lpi_list_lock in vgic_put_irq() Oliver Upton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZdJG8W-TLW8I6O07@linux.dev \
--to=oliver.upton@linux.dev \
--cc=james.morse@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox