From: Sean Christopherson <seanjc@google.com>
To: Rick P Edgecombe <rick.p.edgecombe@intel.com>
Cc: "pbonzini@redhat.com" <pbonzini@redhat.com>,
"sashiko-bot@kernel.org" <sashiko-bot@kernel.org>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Kai Huang <kai.huang@intel.com>,
Yan Y Zhao <yan.y.zhao@intel.com>
Subject: Re: [PATCH 1/4] KVM: x86/mmu: Reload MMU on *every* page pre-fault attempt/iteration
Date: Fri, 7 Aug 2026 12:11:04 -0700 [thread overview]
Message-ID: <anYtyBPskIAJlFlt@google.com> (raw)
In-Reply-To: <6d8ac2f9487e5a00745be5fadac3f83679cae99f.camel@intel.com>
On Fri, Aug 07, 2026, Rick P Edgecombe wrote:
> On Thu, 2026-08-06 at 14:40 -0700, Sean Christopherson wrote:
> > Reload the MMU (which is a nop if the MMU doesn't need to be reloaded) on
> > every attempt to pre-fault a guest page, i.e. when the page fault path
> > signals that the caller should retry. If the synchronize_srcu_expedited()
> > in kvm_invalidate_memslot() completes before kvm_vcpu_pre_fault_memory()
> > grabs SRCU, but kvm_mmu_reload() in the pre-fault path completes before
> > kvm_invalidate_memslot() triggers x86's "fast zap all", then the pre-fault
> > task will reach kvm_tdp_page_prefault() with an invalid root.
> >
> > Attempting to fault-in memory with an invalid root ultimately puts
> > kvm_tdp_page_prefault() into an infinite (breakable) retry loop, which
> > manifests most obviously as a hang in the pre_fault_memory_test selftest,
> > but also eventually causes RCU (SRCU?) to complain.
> >
> > INFO: rcu_tasks detected stalls on tasks:
> > 000000000cda47bd: .. nvcsw: 6/6 holdout: 1 idle_cpu: -1/25
> > task:pre_fault_memor state:R running task stack:12696
> > pid:95588 tgid:95588 ppid:95584 task_flags:0x400000 flags:0x00080801
> > Call Trace:
> > <TASK>
> > lock_release+0x4e/0x320
> > __get_user_pages+0x546/0xcd0
> > up_read+0x1b/0x30
> > get_user_pages_unlocked+0xee/0x350
> > hva_to_pfn+0xd3/0x3d0 [kvm]
> > lock_release+0x4e/0x320
> > xa_load+0x5c/0x170
> > xa_load+0x14c/0x170
> > __kvm_faultin_pfn+0xd9/0x130 [kvm]
> > lock_acquire+0x65/0x2b0
> > lock_release+0x4e/0x320
> > kvm_mmu_faultin_pfn+0x1e1/0x690 [kvm]
> > gup_fast_fallback+0x63e/0xdf0
> > kvm_tdp_page_fault+0xeb/0x140 [kvm]
> > kvm_mmu_do_page_fault+0x12e/0x200 [kvm]
> > kvm_arch_vcpu_pre_fault_memory+0x16e/0x200 [kvm]
> > kvm_vcpu_pre_fault_memory+0xc1/0x1f0 [kvm]
> > kvm_vcpu_pre_fault_memory+0x116/0x1f0 [kvm]
> > kvm_vcpu_ioctl+0x3a4/0x6b0 [kvm]
> > clockevents_program_event+0x5d/0x170
> > __se_sys_ioctl+0x6d/0xb0
> > entry_SYSCALL_64_after_hwframe+0x4b/0x53
> > do_syscall_64+0x10a/0x480
> > __irq_exit_rcu+0x8e/0x140
> > entry_SYSCALL_64_after_hwframe+0x4b/0x53
> > </TASK>
> >
> > Fixes: 6e01b7601dfe ("KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()")
> > Signed-off-by: Sean Christopherson <seanjc@google.com>
>
>
> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
>
> But, did you hit this somehow with an unmodified test and kernel? The log makes
> me think it was hit in a normal test run. (which I failed to reproduce)
Yes and yes. I often test by running all selftests in parallel. My guess is that
PREEMPT_LAZY plus oversubscribed CPUs allowed the timing condition to be hit. It
wasn't anywhere near 100% reproducible on my end either, maybe 1 out of every 10
runs? 20 runs? (of the entire suite of selftests).
P.S. I was very proud of myself: because the failure was so flaky, I used perf
and bpftrace to debug the issue instead of my usual hack-the-kernel approach. :-)
next prev parent reply other threads:[~2026-08-07 19:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 21:40 [PATCH 0/4] KVM: x86/mmu: Fix pre-fault and map private loops Sean Christopherson
2026-08-06 21:40 ` [PATCH 1/4] KVM: x86/mmu: Reload MMU on *every* page pre-fault attempt/iteration Sean Christopherson
2026-08-07 8:58 ` Huang, Kai
2026-08-07 19:04 ` Edgecombe, Rick P
2026-08-07 19:11 ` Sean Christopherson [this message]
2026-08-06 21:40 ` [PATCH 2/4] KVM: x86/mmu: Harden "map private PFN" against unexpected root invalidation Sean Christopherson
2026-08-06 22:14 ` sashiko-bot
2026-08-06 22:21 ` Sean Christopherson
2026-08-07 20:26 ` Edgecombe, Rick P
2026-08-07 22:18 ` Sean Christopherson
2026-08-06 21:40 ` [PATCH 3/4] KVM: x86/mmu: Top-up memory caches when retrying "map private PFN" Sean Christopherson
2026-08-06 21:56 ` sashiko-bot
2026-08-06 22:07 ` Sean Christopherson
2026-08-07 20:38 ` Edgecombe, Rick P
2026-08-07 22:13 ` Sean Christopherson
2026-08-06 21:40 ` [PATCH 4/4] KVM: x86/mmu: Add sanity check to detect stale page faults in " Sean Christopherson
2026-08-06 21:54 ` sashiko-bot
2026-08-06 22:12 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=anYtyBPskIAJlFlt@google.com \
--to=seanjc@google.com \
--cc=kai.huang@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=sashiko-bot@kernel.org \
--cc=yan.y.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox