Kernel KVM virtualization development
 help / color / mirror / Atom feed
From: Chao Gao <chao.gao@intel.com>
To: Binbin Wu <binbin.wu@linux.intel.com>
Cc: <linux-kernel@vger.kernel.org>, <kvm@vger.kernel.org>,
	<seanjc@google.com>, <pbonzini@redhat.com>,
	<dave.hansen@linux.intel.com>, <andrew.cooper3@citrix.com>,
	<nik.borisov@suse.com>, <kas@kernel.org>,
	<rick.p.edgecombe@intel.com>, <xiaoyao.li@intel.com>,
	<tony.lindgren@linux.intel.com>, <kishen.maloor@intel.com>,
	<dedekind1@gmail.com>, <adrian.hunter@intel.com>
Subject: Re: [PATCH v5 2/5] KVM: TDX: Track configurable CPUID bits allowed by KVM
Date: Fri, 23 Oct 2026 11:24:33 +0800	[thread overview]
Message-ID: <atrTcWO8FRz07Vc9@intel.com> (raw)
In-Reply-To: <20261016091422.3182216-3-binbin.wu@linux.intel.com>

On Fri, Oct 16, 2026 at 05:14:19PM +0800, Binbin Wu wrote:
>Add tdx_cpu_cfg_caps[] to track the subset of TDX directly configurable
>CPUID feature bits that KVM supports, and initialize it during TDX
>hardware setup.
>
>The TDX module reports the CPUID bits that the VMM can directly configure
>for a TD, but KVM can't blindly expose every reported bit to userspace.
>Some features imply additional state, e.g. MSRs, that KVM must context
>switch across host/guest transitions to avoid corrupting host state.  The
>existing hardcoded denylist can't account for such features introduced by
>future TDX modules.
>
>Aside from a few fixed-1 bits required for basic TDX support, features
>that can clobber host state are either directly configurable or controlled
>by TD ATTRIBUTES/XFAM, which KVM already validates.  Thus, an allowlist
>covering only the directly configurable bits is sufficient.
>
>Organize tdx_cpu_cfg_caps[] like kvm_cpu_caps[] so that the allowlist can
>be built with feature-name based initializers.  Directly configurable bits
>that aren't feature flags will be handled when building the per-register
>masks for KVM_TDX_CAPABILITIES.
>
>Sort the directly configurable CPUID feature bits into three categories:
>
> 1) Features that KVM supports and tracks in kvm_cpu_caps[].  Use
>    TDX_CFG_F() so that they are also capped by kvm_cpu_caps[].
>
> 2) Features that KVM supports, or can safely allow, but doesn't track in
>    kvm_cpu_caps[], i.e. MWAIT and HT.  Use TDX_CFG_INDEPENDENT_F().
>
> 3) Features that are obsolete or unsupported by KVM, and thus excluded,
>    i.e. EST, TM2, CID, SDBG, XTPR, DCA, PN (PSN), ACPI, ACC (TM), PBE,
>    HLE, RTM, CQM (RDT_M), RDT_A, PREFETCHWT1, WAITPKG, TME, PCONFIG,
>    CORE_CAPABILITIES, RAO_INT, FRED, and AMX-TRANSPOSE.
>
>Excluding the features in category 3 shouldn't break userspace, as
>userspace is expected to consult KVM_TDX_CAPABILITIES for the configurable
>bits before invoking KVM_TDX_INIT_VM.  Nor should it break guests, as the
>features are either obsolete or unsupported by KVM, and in the latter case,
>a guest relying on them would already have run into problems.
>CORE_CAPABILITIES is a special case; it will be allowed separately to
>accommodate its legacy fixed-1 definition.
>
>Future changes will use tdx_cpu_cfg_caps[] to filter KVM_TDX_CAPABILITIES
>and to reject unsupported CPUID input to KVM_TDX_INIT_VM, so that directly
>configurable bits introduced by future TDX modules are neither advertised
>to nor configurable by userspace until KVM explicitly opts in.
>
>Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>

Reviewed-by: Chao Gao <chao.gao@intel.com>

  reply	other threads:[~2026-10-23  3:25 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-16  9:14 [PATCH v5 0/5] KVM: TDX: Validate directly configurable CPUID bits Binbin Wu
2026-10-16  9:14 ` [PATCH v5 1/5] KVM: TDX: Check unsupported CPUID bits against the TDX module's subleaf Binbin Wu
2026-10-16 15:25   ` Sean Christopherson
2026-10-16 22:15     ` Binbin Wu
2026-10-16 23:26       ` Sean Christopherson
2026-10-16  9:14 ` [PATCH v5 2/5] KVM: TDX: Track configurable CPUID bits allowed by KVM Binbin Wu
2026-10-23  3:24   ` Chao Gao [this message]
2026-10-23  7:35   ` Xiaoyao Li
2026-10-16  9:14 ` [PATCH v5 3/5] KVM: TDX: Add CORE_CAPABILITIES to the allowlist Binbin Wu
2026-10-23  3:25   ` Chao Gao
2026-10-16  9:14 ` [PATCH v5 4/5] KVM: TDX: Report only KVM-allowed CPUIDs in KVM_TDX_CAPABILITIES Binbin Wu
2026-10-21  0:39   ` Edgecombe, Rick P
2026-10-21  2:15     ` Binbin Wu
2026-10-21 17:19       ` Edgecombe, Rick P
2026-10-22  2:20         ` Binbin Wu
2026-10-23  7:42           ` Xiaoyao Li
2026-10-23  3:27   ` Chao Gao
2026-10-16  9:14 ` [PATCH v5 5/5] KVM: TDX: Validate userspace CPUID input for KVM_TDX_INIT_VM Binbin Wu
2026-10-16  9:24   ` sashiko-bot
2026-10-20  1:34     ` Binbin Wu
2026-10-23  3:37   ` Chao Gao
2026-10-23  7:46   ` Xiaoyao Li
2026-10-23  7:48     ` Binbin Wu
2026-10-21  0:59 ` [PATCH v5 0/5] KVM: TDX: Validate directly configurable CPUID bits Edgecombe, Rick P
2026-10-21 17:43 ` Nikolay Borisov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=atrTcWO8FRz07Vc9@intel.com \
    --to=chao.gao@intel.com \
    --cc=adrian.hunter@intel.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=binbin.wu@linux.intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=dedekind1@gmail.com \
    --cc=kas@kernel.org \
    --cc=kishen.maloor@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nik.borisov@suse.com \
    --cc=pbonzini@redhat.com \
    --cc=rick.p.edgecombe@intel.com \
    --cc=seanjc@google.com \
    --cc=tony.lindgren@linux.intel.com \
    --cc=xiaoyao.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox