From: Farhan Ali <alifm@linux.ibm.com>
To: Niklas Schnelle <schnelle@linux.ibm.com>,
linux-s390@vger.kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Cc: alex.williamson@redhat.com, helgaas@kernel.org, clg@redhat.com,
mjrosato@linux.ibm.com
Subject: Re: [PATCH v4 07/10] s390/pci: Store PCI error information for passthrough devices
Date: Thu, 25 Sep 2025 09:29:05 -0700 [thread overview]
Message-ID: <e8def2b9-bb37-4595-9e2e-0d1947e8f197@linux.ibm.com> (raw)
In-Reply-To: <d22cb26b864362454ace07ed5fcb9758c40ee32e.camel@linux.ibm.com>
>> +void zpci_cleanup_pending_errors(struct zpci_dev *zdev)
>> +{
>> + struct pci_dev *pdev = NULL;
>> +
>> + mutex_lock(&zdev->pending_errs_lock);
>> + pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn);
> I think you missed my comment on the previous version. This is missing
> the matching pci_dev_put() for the pci_get_slot().
Ah yes indeed i missed that comment, my apologies. Will fixup.
>
>> + if (zdev->pending_errs.count)
>> + pr_info("%s: Unhandled PCI error events count=%d",
>> + pci_name(pdev), zdev->pending_errs.count);
>> + memset(&zdev->pending_errs, 0, sizeof(struct zpci_ccdf_pending));
>> + mutex_unlock(&zdev->pending_errs_lock);
>> +}
>> +EXPORT_SYMBOL_GPL(zpci_cleanup_pending_errors);
>> +
>>
> --- snip ---
>>
>> @@ -322,12 +340,13 @@ static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
>> break;
>> case 0x0040: /* Service Action or Error Recovery Failed */
>> case 0x003b:
>> - zpci_event_io_failure(pdev, pci_channel_io_perm_failure);
>> + zpci_event_io_failure(pdev, pci_channel_io_perm_failure, ccdf);
>> break;
>> default: /* PCI function left in the error state attempt to recover */
>> - ers_res = zpci_event_attempt_error_recovery(pdev);
>> + ers_res = zpci_event_attempt_error_recovery(pdev, ccdf);
>> if (ers_res != PCI_ERS_RESULT_RECOVERED)
>> - zpci_event_io_failure(pdev, pci_channel_io_perm_failure);
>> + zpci_event_io_failure(pdev, pci_channel_io_perm_failure,
>> + ccdf);
> Nit: I'd just keep the above on one line. It's still below the 100
> columns limit and just cleaner on one line.
I think I did this for checkpatch warning, but can move it back and see
if the warning happens.
Thanks
Farhan
>
>> break;
>> }
>> pci_dev_put(pdev);
>> diff --git a/drivers/vfio/pci/vfio_pci_zdev.c b/drivers/vfio/pci/vfio_pci_zdev.c
>> index a7bc23ce8483..2be37eab9279 100644
>> --- a/drivers/vfio/pci/vfio_pci_zdev.c
>> +++ b/drivers/vfio/pci/vfio_pci_zdev.c
>> @@ -168,6 +168,8 @@ void vfio_pci_zdev_close_device(struct vfio_pci_core_device *vdev)
>>
>> zdev->mediated_recovery = false;
>>
>> + zpci_cleanup_pending_errors(zdev);
>> +
>> if (!vdev->vdev.kvm)
>> return;
>>
next prev parent reply other threads:[~2025-09-25 16:29 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-24 17:16 [PATCH v4 00/10] Error recovery for vfio-pci devices on s390x Farhan Ali
2025-09-24 17:16 ` [PATCH v4 01/10] PCI: Avoid saving error values for config space Farhan Ali
2025-10-01 15:15 ` Benjamin Block
2025-10-01 17:12 ` Farhan Ali
2025-10-02 9:16 ` Benjamin Block
2025-10-04 14:54 ` Lukas Wunner
2025-10-06 17:54 ` Farhan Ali
2025-10-06 19:26 ` Lukas Wunner
2025-10-06 21:35 ` Farhan Ali
2025-10-08 13:34 ` Lukas Wunner
2025-10-08 17:56 ` Farhan Ali
2025-10-08 18:14 ` Lukas Wunner
2025-10-08 21:55 ` Farhan Ali
2025-10-09 4:52 ` Lukas Wunner
2025-10-09 17:02 ` Farhan Ali
2025-10-12 6:43 ` Lukas Wunner
2025-10-09 9:12 ` Niklas Schnelle
2025-10-12 6:34 ` Lukas Wunner
2025-10-14 12:07 ` Niklas Schnelle
2025-10-16 21:00 ` Farhan Ali
2025-10-19 14:34 ` Lukas Wunner
2025-10-20 8:59 ` Niklas Schnelle
2025-11-22 10:58 ` Lukas Wunner
2025-09-24 17:16 ` [PATCH v4 02/10] PCI: Add additional checks for flr reset Farhan Ali
2025-09-30 10:03 ` Benjamin Block
2025-09-30 17:04 ` Farhan Ali
2025-10-01 8:33 ` Benjamin Block
2025-10-01 14:37 ` Benjamin Block
2025-09-24 17:16 ` [PATCH v4 03/10] PCI: Allow per function PCI slots Farhan Ali
2025-10-01 14:34 ` Benjamin Block
2025-09-24 17:16 ` [PATCH v4 04/10] s390/pci: Add architecture specific resource/bus address translation Farhan Ali
2025-09-25 10:54 ` Niklas Schnelle
2025-10-01 16:04 ` Benjamin Block
2025-10-01 18:01 ` Farhan Ali
2025-10-02 12:58 ` Niklas Schnelle
2025-10-02 17:00 ` Bjorn Helgaas
2025-10-02 17:16 ` Ilpo Järvinen
2025-10-02 18:14 ` Niklas Schnelle
2025-09-24 17:16 ` [PATCH v4 05/10] s390/pci: Restore IRQ unconditionally for the zPCI device Farhan Ali
2025-09-24 17:16 ` [PATCH v4 06/10] s390/pci: Update the logic for detecting passthrough device Farhan Ali
2025-09-24 17:16 ` [PATCH v4 07/10] s390/pci: Store PCI error information for passthrough devices Farhan Ali
2025-09-25 14:28 ` Niklas Schnelle
2025-09-25 16:29 ` Farhan Ali [this message]
2025-09-24 17:16 ` [PATCH v4 08/10] vfio-pci/zdev: Add a device feature for error information Farhan Ali
2025-09-25 8:04 ` kernel test robot
2025-09-24 17:16 ` [PATCH v4 09/10] vfio: Add a reset_done callback for vfio-pci driver Farhan Ali
2025-09-24 17:16 ` [PATCH v4 10/10] vfio: Remove the pcie check for VFIO_PCI_ERR_IRQ_INDEX Farhan Ali
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e8def2b9-bb37-4595-9e2e-0d1947e8f197@linux.ibm.com \
--to=alifm@linux.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=clg@redhat.com \
--cc=helgaas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=schnelle@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox