public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
To: liulongfang <liulongfang@huawei.com>,
	"alex.williamson@redhat.com" <alex.williamson@redhat.com>,
	"jgg@nvidia.com" <jgg@nvidia.com>,
	"Jonathan Cameron" <jonathan.cameron@huawei.com>
Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linuxarm@openeuler.org" <linuxarm@openeuler.org>
Subject: RE: [PATCH v12 3/4] hisi_acc_vfio_pci: register debugfs for hisilicon migration driver
Date: Tue, 5 Nov 2024 08:55:51 +0000	[thread overview]
Message-ID: <fc776543a1d14531b28b5fa693925518@huawei.com> (raw)
In-Reply-To: <20241105035254.24636-4-liulongfang@huawei.com>



> -----Original Message-----
> From: liulongfang <liulongfang@huawei.com>
> Sent: Tuesday, November 5, 2024 3:53 AM
> To: alex.williamson@redhat.com; jgg@nvidia.com; Shameerali Kolothum
> Thodi <shameerali.kolothum.thodi@huawei.com>; Jonathan Cameron
> <jonathan.cameron@huawei.com>
> Cc: kvm@vger.kernel.org; linux-kernel@vger.kernel.org;
> linuxarm@openeuler.org; liulongfang <liulongfang@huawei.com>
> Subject: [PATCH v12 3/4] hisi_acc_vfio_pci: register debugfs for hisilicon
> migration driver

Hi,

Few minor comments below. Please don't re-spin just for these yet.
Please wait for others to review as well.

Thanks,
Shameer

> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> index a8c53952d82e..7728c9745b9d 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> @@ -627,15 +627,30 @@ static void hisi_acc_vf_disable_fd(struct
> hisi_acc_vf_migration_file *migf)
>  	mutex_unlock(&migf->lock);
>  }
> 
> +static void hisi_acc_debug_migf_copy(struct hisi_acc_vf_core_device
> *hisi_acc_vdev,
> +	struct hisi_acc_vf_migration_file *src_migf)

Alignment should match open parenthesis here.

> +{
> +	struct hisi_acc_vf_migration_file *dst_migf = hisi_acc_vdev-
> >debug_migf;
> +
> +	if (!dst_migf)
> +		return;
> +
> +	dst_migf->total_length = src_migf->total_length;
> +	memcpy(&dst_migf->vf_data, &src_migf->vf_data,
> +		sizeof(struct acc_vf_data));

Here too, alignment not correct. It is better to run,
./scripts/checkpatch --strict on these patches if you haven't done already.

> +}
> +
>  static void hisi_acc_vf_disable_fds(struct hisi_acc_vf_core_device
> *hisi_acc_vdev)
>  {
>  	if (hisi_acc_vdev->resuming_migf) {
> +		hisi_acc_debug_migf_copy(hisi_acc_vdev, hisi_acc_vdev-
> >resuming_migf);
>  		hisi_acc_vf_disable_fd(hisi_acc_vdev->resuming_migf);
>  		fput(hisi_acc_vdev->resuming_migf->filp);
>  		hisi_acc_vdev->resuming_migf = NULL;
>  	}
> 
>  	if (hisi_acc_vdev->saving_migf) {
> +		hisi_acc_debug_migf_copy(hisi_acc_vdev, hisi_acc_vdev-
> >saving_migf);
>  		hisi_acc_vf_disable_fd(hisi_acc_vdev->saving_migf);
>  		fput(hisi_acc_vdev->saving_migf->filp);
>  		hisi_acc_vdev->saving_migf = NULL;
> @@ -1294,6 +1309,129 @@ static long hisi_acc_vfio_pci_ioctl(struct
> vfio_device *core_vdev, unsigned int
>  	return vfio_pci_core_ioctl(core_vdev, cmd, arg);
>  }
> 
> +static int hisi_acc_vf_debug_check(struct seq_file *seq, struct vfio_device
> *vdev)
> +{
> +	struct hisi_acc_vf_core_device *hisi_acc_vdev =
> hisi_acc_get_vf_dev(vdev);
> +	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
> +	int ret;
> +
> +	lockdep_assert_held(&hisi_acc_vdev->open_mutex);
> +	/*
> +	 * When the device is not opened, the io_base is not mapped.
> +	 * The driver cannot perform device read and write operations.
> +	 */
> +	if (!hisi_acc_vdev->dev_opened) {
> +		seq_printf(seq, "device not opened!\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = qm_wait_dev_not_ready(vf_qm);
> +	if (ret) {
> +		seq_printf(seq, "VF device not ready!\n");
> +		return -EBUSY;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hisi_acc_vf_debug_cmd(struct seq_file *seq, void *data)
> +{
> +	struct device *vf_dev = seq->private;
> +	struct vfio_pci_core_device *core_device =
> dev_get_drvdata(vf_dev);
> +	struct vfio_device *vdev = &core_device->vdev;
> +	struct hisi_acc_vf_core_device *hisi_acc_vdev =
> hisi_acc_get_vf_dev(vdev);
> +	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
> +	u64 value;
> +	int ret;
> +
> +	mutex_lock(&hisi_acc_vdev->open_mutex);
> +	ret = hisi_acc_vf_debug_check(seq, vdev);
> +	if (ret) {
> +		mutex_unlock(&hisi_acc_vdev->open_mutex);
> +		return ret;
> +	}
> +
> +	value = readl(vf_qm->io_base + QM_MB_CMD_SEND_BASE);
> +	if (value == QM_MB_CMD_NOT_READY) {
> +		mutex_unlock(&hisi_acc_vdev->open_mutex);
> +		seq_printf(seq, "mailbox cmd channel not ready!\n");
> +		return -EINVAL;
> +	}
> +	mutex_unlock(&hisi_acc_vdev->open_mutex);
> +	seq_printf(seq, "mailbox cmd channel ready!\n");
> +
> +	return 0;
> +}
> +
> +static int hisi_acc_vf_dev_read(struct seq_file *seq, void *data)
> +{
> +	struct device *vf_dev = seq->private;
> +	struct vfio_pci_core_device *core_device =
> dev_get_drvdata(vf_dev);
> +	struct vfio_device *vdev = &core_device->vdev;
> +	struct hisi_acc_vf_core_device *hisi_acc_vdev =
> hisi_acc_get_vf_dev(vdev);
> +	size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
> +	struct acc_vf_data *vf_data;
> +	int ret;
> +
> +	mutex_lock(&hisi_acc_vdev->open_mutex);
> +	ret = hisi_acc_vf_debug_check(seq, vdev);
> +	if (ret) {
> +		mutex_unlock(&hisi_acc_vdev->open_mutex);
> +		return ret;
> +	}
> +
> +	mutex_lock(&hisi_acc_vdev->state_mutex);
> +	vf_data = kzalloc(sizeof(struct acc_vf_data), GFP_KERNEL);
> +	if (!vf_data) {
> +		ret = -ENOMEM;
> +		goto mutex_release;
> +	}
> +
> +	vf_data->vf_qm_state = hisi_acc_vdev->vf_qm_state;
> +	ret = vf_qm_read_data(&hisi_acc_vdev->vf_qm, vf_data);
> +	if (ret)
> +		goto migf_err;
> +
> +	seq_hex_dump(seq, "Dev Data:", DUMP_PREFIX_OFFSET, 16, 1,
> +		     (const void *)vf_data, vf_data_sz, false);
> +
> +	seq_printf(seq,
> +		   "guest driver load: %u\n"
> +		   "data size: %lu\n",
> +		   hisi_acc_vdev->vf_qm_state,
> +		   sizeof(struct acc_vf_data));

There was a suggestion to add a comment here to describe vf_qm_state better.
May be something like,

vf_qm_state here indicates whether the Guest has loaded the driver for the ACC VF
device or not.

> +
> +migf_err:
> +	kfree(vf_data);
> +mutex_release:
> +	mutex_unlock(&hisi_acc_vdev->state_mutex);
> +	mutex_unlock(&hisi_acc_vdev->open_mutex);
> +
> +	return ret;
> +}
> +
> +static int hisi_acc_vf_migf_read(struct seq_file *seq, void *data)
> +{
> +	struct device *vf_dev = seq->private;
> +	struct vfio_pci_core_device *core_device =
> dev_get_drvdata(vf_dev);
> +	struct vfio_device *vdev = &core_device->vdev;
> +	struct hisi_acc_vf_core_device *hisi_acc_vdev =
> hisi_acc_get_vf_dev(vdev);
> +	size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
> +	struct hisi_acc_vf_migration_file *debug_migf = hisi_acc_vdev-
> >debug_migf;
> +
> +	/* Check whether the live migration operation has been performed
> */
> +	if (debug_migf->total_length < QM_MATCH_SIZE) {
> +		seq_printf(seq, "device not migrated!\n");
> +		return -EAGAIN;
> +	}
> +
> +	seq_hex_dump(seq, "Mig Data:", DUMP_PREFIX_OFFSET, 16, 1,
> +		     (const void *)&debug_migf->vf_data, vf_data_sz, false);
> +	seq_printf(seq, "migrate data length: %lu\n", debug_migf-
> >total_length);
> +
> +	return 0;
> +}
> +
>  static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
>  {
>  	struct hisi_acc_vf_core_device *hisi_acc_vdev =
> hisi_acc_get_vf_dev(core_vdev);
> @@ -1305,12 +1443,16 @@ static int hisi_acc_vfio_pci_open_device(struct
> vfio_device *core_vdev)
>  		return ret;
> 
>  	if (core_vdev->mig_ops) {
> +		mutex_lock(&hisi_acc_vdev->open_mutex);
>  		ret = hisi_acc_vf_qm_init(hisi_acc_vdev);
>  		if (ret) {
> +			mutex_unlock(&hisi_acc_vdev->open_mutex);
>  			vfio_pci_core_disable(vdev);
>  			return ret;
>  		}
>  		hisi_acc_vdev->mig_state = VFIO_DEVICE_STATE_RUNNING;
> +		hisi_acc_vdev->dev_opened = true;
> +		mutex_unlock(&hisi_acc_vdev->open_mutex);
>  	}
> 
>  	vfio_pci_core_finish_enable(vdev);
> @@ -1322,7 +1464,10 @@ static void hisi_acc_vfio_pci_close_device(struct
> vfio_device *core_vdev)
>  	struct hisi_acc_vf_core_device *hisi_acc_vdev =
> hisi_acc_get_vf_dev(core_vdev);
>  	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
> 
> +	mutex_lock(&hisi_acc_vdev->open_mutex);
> +	hisi_acc_vdev->dev_opened = false;
>  	iounmap(vf_qm->io_base);
> +	mutex_unlock(&hisi_acc_vdev->open_mutex);
>  	vfio_pci_core_close_device(core_vdev);
>  }
> 
> @@ -1342,6 +1487,7 @@ static int hisi_acc_vfio_pci_migrn_init_dev(struct
> vfio_device *core_vdev)
>  	hisi_acc_vdev->pf_qm = pf_qm;
>  	hisi_acc_vdev->vf_dev = pdev;
>  	mutex_init(&hisi_acc_vdev->state_mutex);
> +	mutex_init(&hisi_acc_vdev->open_mutex);
> 
>  	core_vdev->migration_flags = VFIO_MIGRATION_STOP_COPY |
> VFIO_MIGRATION_PRE_COPY;
>  	core_vdev->mig_ops = &hisi_acc_vfio_pci_migrn_state_ops;
> @@ -1387,6 +1533,48 @@ static const struct vfio_device_ops
> hisi_acc_vfio_pci_ops = {
>  	.detach_ioas = vfio_iommufd_physical_detach_ioas,
>  };
> 
> +static void hisi_acc_vfio_debug_init(struct hisi_acc_vf_core_device
> *hisi_acc_vdev)
> +{
> +	struct vfio_device *vdev = &hisi_acc_vdev->core_device.vdev;
> +	struct dentry *vfio_dev_migration = NULL;
> +	struct dentry *vfio_hisi_acc = NULL;
> +	struct device *dev = vdev->dev;
> +	void *migf = NULL;
> +
> +	if (!debugfs_initialized() ||
> +	    !IS_ENABLED(CONFIG_VFIO_DEBUGFS))
> +		return;
> +
> +	if (vdev->ops != &hisi_acc_vfio_pci_migrn_ops)
> +		return;
> +
> +	vfio_dev_migration = debugfs_lookup("migration", vdev-
> >debug_root);
> +	if (!vfio_dev_migration) {
> +		dev_err(dev, "failed to lookup migration debugfs file!\n");
> +		return;
> +	}
> +
> +	migf = kzalloc(sizeof(struct hisi_acc_vf_migration_file),
> GFP_KERNEL);
> +	if (!migf)
> +		return;
> +	hisi_acc_vdev->debug_migf = migf;
> +
> +	vfio_hisi_acc = debugfs_create_dir("hisi_acc", vfio_dev_migration);
> +	debugfs_create_devm_seqfile(dev, "dev_data", vfio_hisi_acc,
> +				    hisi_acc_vf_dev_read);
> +	debugfs_create_devm_seqfile(dev, "migf_data", vfio_hisi_acc,
> +				    hisi_acc_vf_migf_read);
> +	debugfs_create_devm_seqfile(dev, "cmd_state", vfio_hisi_acc,
> +				    hisi_acc_vf_debug_cmd);
> +}
> +
> +static void hisi_acc_vf_debugfs_exit(struct hisi_acc_vf_core_device
> *hisi_acc_vdev)
> +{
> +	/* If migrn_ops is not used, kfree(NULL) is valid */

The above comment is not required. Please remove.

> +	kfree(hisi_acc_vdev->debug_migf);
> +	hisi_acc_vdev->debug_migf = NULL;
> +}
> +


  reply	other threads:[~2024-11-05  8:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-05  3:52 [PATCH v12 0/4] debugfs to hisilicon migration driver Longfang Liu
2024-11-05  3:52 ` [PATCH v12 1/4] hisi_acc_vfio_pci: extract public functions for container_of Longfang Liu
2024-11-05  3:52 ` [PATCH v12 2/4] hisi_acc_vfio_pci: create subfunction for data reading Longfang Liu
2024-11-05  3:52 ` [PATCH v12 3/4] hisi_acc_vfio_pci: register debugfs for hisilicon migration driver Longfang Liu
2024-11-05  8:55   ` Shameerali Kolothum Thodi [this message]
2024-11-05 18:21     ` Alex Williamson
2024-11-06  9:19       ` liulongfang
2024-11-05  3:52 ` [PATCH v12 4/4] Documentation: add debugfs description for hisi migration Longfang Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fc776543a1d14531b28b5fa693925518@huawei.com \
    --to=shameerali.kolothum.thodi@huawei.com \
    --cc=alex.williamson@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@openeuler.org \
    --cc=liulongfang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox