From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nerijus Baliunas Subject: Re: lightscribe support Date: Sat, 15 Feb 2014 13:07:10 +0000 (UTC) Message-ID: References: <52FF3C4E.6050101@mglug.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: kvm@vger.kernel.org Return-path: Received: from plane.gmane.org ([80.91.229.3]:39361 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753050AbaBONHg (ORCPT ); Sat, 15 Feb 2014 08:07:36 -0500 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1WEexy-0000Qi-Q7 for kvm@vger.kernel.org; Sat, 15 Feb 2014 14:07:35 +0100 Received: from data-214-110.cgates.lt ([data-214-110.cgates.lt]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 15 Feb 2014 14:07:34 +0100 Received: from nerijus by data-214-110.cgates.lt with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 15 Feb 2014 14:07:34 +0100 Sender: kvm-owner@vger.kernel.org List-ID: Oliver Rath mglug.de> writes: > Normally kvm emulates the cdrom drive. If you want to use the native > functionality, you have to passthrough the drive (depending on the your > device usb or pci sata-hardware). If your drive is attached via usb, you > can try passthrough the usb-device, if it is connected via sata, you > have to passthrough the sata-pci-device. It is connected via PCI IDE controller (Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller). Is it possible to passthrough it? Thanks, Nerijus