* Re: 2.6.35 hangs on early boot in KVM [not found] <201008031028.57263.tvrtko.ursulin@sophos.com> @ 2010-08-03 14:51 ` Avi Kivity 2010-08-03 14:57 ` Tvrtko Ursulin 0 siblings, 1 reply; 21+ messages in thread From: Avi Kivity @ 2010-08-03 14:51 UTC (permalink / raw) To: Tvrtko Ursulin; +Cc: linux-kernel@vger.kernel.org, KVM list On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > I have basically built 2.6.35 with make oldconfig from a working 2.6.34. > Latter works fine in kvm while 2.6.35 hangs very early. I see nothing after > grub (have early printk and verbose bootup enabled), just a blinking VGA > cursor and CPU at 100%. > Please copy kvm@vger.kernel.org on kvm issues. > CONFIG_PRINTK_TIME=y Try disabling this as a workaround. -- error compiling committee.c: too many arguments to function ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 14:51 ` 2.6.35 hangs on early boot in KVM Avi Kivity @ 2010-08-03 14:57 ` Tvrtko Ursulin 2010-08-03 15:17 ` Tvrtko Ursulin 0 siblings, 1 reply; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-03 14:57 UTC (permalink / raw) To: Avi Kivity; +Cc: linux-kernel@vger.kernel.org, KVM list On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > > I have basically built 2.6.35 with make oldconfig from a working 2.6.34. > > Latter works fine in kvm while 2.6.35 hangs very early. I see nothing > > after grub (have early printk and verbose bootup enabled), just a > > blinking VGA cursor and CPU at 100%. > > Please copy kvm@vger.kernel.org on kvm issues. > > > CONFIG_PRINTK_TIME=y > > Try disabling this as a workaround. I am in the middle of a bisect run with five builds left to go, currently I have: bad 537b60d17894b7c19a6060feae40299d7109d6e7 good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 14:57 ` Tvrtko Ursulin @ 2010-08-03 15:17 ` Tvrtko Ursulin 2010-08-03 15:31 ` Tvrtko Ursulin 2010-08-03 15:59 ` Tvrtko Ursulin 0 siblings, 2 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-03 15:17 UTC (permalink / raw) To: Avi Kivity; +Cc: linux-kernel@vger.kernel.org, KVM list On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > > > I have basically built 2.6.35 with make oldconfig from a working > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I see > > > nothing after grub (have early printk and verbose bootup enabled), > > > just a blinking VGA cursor and CPU at 100%. > > > > Please copy kvm@vger.kernel.org on kvm issues. > > > > > CONFIG_PRINTK_TIME=y > > > > Try disabling this as a workaround. > > I am in the middle of a bisect run with five builds left to go, currently I > have: > > bad 537b60d17894b7c19a6060feae40299d7109d6e7 > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 Bisect is looking good, narrowed it to ten revisions, but I am not sure to make it to the end today: bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea good 41d59102e146a4423a490b8eca68a5860af4fe1c One interesting waning spotted: include/config/auto.conf:555:warning: symbol value '-fcall-saved-ecx -fcall- saved-edx' invalid for ARCH_HWEIGHT_CFLAGS Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 15:17 ` Tvrtko Ursulin @ 2010-08-03 15:31 ` Tvrtko Ursulin 2010-08-03 15:49 ` Borislav Petkov 2010-08-03 15:59 ` Tvrtko Ursulin 1 sibling, 1 reply; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-03 15:31 UTC (permalink / raw) To: Avi Kivity; +Cc: linux-kernel@vger.kernel.org, KVM list, hpa, bp On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > > > > I have basically built 2.6.35 with make oldconfig from a working > > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I see > > > > nothing after grub (have early printk and verbose bootup enabled), > > > > just a blinking VGA cursor and CPU at 100%. > > > > > > Please copy kvm@vger.kernel.org on kvm issues. > > > > > > > CONFIG_PRINTK_TIME=y > > > > > > Try disabling this as a workaround. > > > > I am in the middle of a bisect run with five builds left to go, currently > > I have: > > > > bad 537b60d17894b7c19a6060feae40299d7109d6e7 > > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > > Bisect is looking good, narrowed it to ten revisions, but I am not sure to > make it to the end today: > > bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > good 41d59102e146a4423a490b8eca68a5860af4fe1c > > One interesting waning spotted: > > include/config/auto.conf:555:warning: symbol value '-fcall-saved-ecx > -fcall- saved-edx' invalid for ARCH_HWEIGHT_CFLAGS Copying Peter and Borislav, guys please look at the above warning. I am bisecting a non-bootable 2.6.35 under KVM and while I am not there yet, it is close to the hweight commit (cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea) and I spotted this warning. Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 15:31 ` Tvrtko Ursulin @ 2010-08-03 15:49 ` Borislav Petkov 2010-08-03 16:01 ` Tvrtko Ursulin 0 siblings, 1 reply; 21+ messages in thread From: Borislav Petkov @ 2010-08-03 15:49 UTC (permalink / raw) To: Tvrtko Ursulin Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, hpa@zytor.com From: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Date: Tue, Aug 03, 2010 at 11:31:02AM -0400 > > One interesting waning spotted: > > > > include/config/auto.conf:555:warning: symbol value '-fcall-saved-ecx > > -fcall- saved-edx' invalid for ARCH_HWEIGHT_CFLAGS > > Copying Peter and Borislav, guys please look at the above warning. I am > bisecting a non-bootable 2.6.35 under KVM and while I am not there yet, it is > close to the hweight commit (cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea) and I > spotted this warning. That's because you're at a bisection point before the hweight patch but your .config already contains the ARCH_HWEIGHT_CFLAGS variable because of the previous bisection point which contained the hweight patch. I think this can be safely ignored. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach General Managers: Alberto Bozzo, Andrew Bowd Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen Registergericht Muenchen, HRB Nr. 43632 ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 15:49 ` Borislav Petkov @ 2010-08-03 16:01 ` Tvrtko Ursulin 0 siblings, 0 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-03 16:01 UTC (permalink / raw) To: Borislav Petkov Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, hpa@zytor.com On Tuesday 03 Aug 2010 16:49:01 Borislav Petkov wrote: > From: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> > Date: Tue, Aug 03, 2010 at 11:31:02AM -0400 > > > > One interesting waning spotted: > > > > > > include/config/auto.conf:555:warning: symbol value '-fcall-saved-ecx > > > -fcall- saved-edx' invalid for ARCH_HWEIGHT_CFLAGS > > > > Copying Peter and Borislav, guys please look at the above warning. I am > > bisecting a non-bootable 2.6.35 under KVM and while I am not there yet, > > it is close to the hweight commit > > (cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea) and I spotted this warning. > > That's because you're at a bisection point before the hweight patch but > your .config already contains the ARCH_HWEIGHT_CFLAGS variable because > of the previous bisection point which contained the hweight patch. > > I think this can be safely ignored. Yep, bisect pointed to another commit so I continued another part of this thread. Thanks for the explanation! Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 15:17 ` Tvrtko Ursulin 2010-08-03 15:31 ` Tvrtko Ursulin @ 2010-08-03 15:59 ` Tvrtko Ursulin 2010-08-03 20:37 ` Eric W. Biederman 2010-08-03 20:57 ` Yinghai Lu 1 sibling, 2 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-03 15:59 UTC (permalink / raw) To: Avi Kivity; +Cc: linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > > > > I have basically built 2.6.35 with make oldconfig from a working > > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I see > > > > nothing after grub (have early printk and verbose bootup enabled), > > > > just a blinking VGA cursor and CPU at 100%. > > > > > > Please copy kvm@vger.kernel.org on kvm issues. > > > > > > > CONFIG_PRINTK_TIME=y > > > > > > Try disabling this as a workaround. > > > > I am in the middle of a bisect run with five builds left to go, currently > > I have: > > > > bad 537b60d17894b7c19a6060feae40299d7109d6e7 > > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > > Bisect is looking good, narrowed it to ten revisions, but I am not sure to > make it to the end today: > > bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > good 41d59102e146a4423a490b8eca68a5860af4fe1c Bisect points the finger to "x86, ioapic: In mpparse use mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am copying Eric. No idea whether this commit is solely to blame or it is a combined interaction with KVM, but I am sure you guys will know. If you want me to test something else please shout. Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 15:59 ` Tvrtko Ursulin @ 2010-08-03 20:37 ` Eric W. Biederman 2010-08-04 8:09 ` Tvrtko Ursulin 2010-08-03 20:57 ` Yinghai Lu 1 sibling, 1 reply; 21+ messages in thread From: Eric W. Biederman @ 2010-08-03 20:37 UTC (permalink / raw) To: Tvrtko Ursulin; +Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list Tvrtko Ursulin <tvrtko.ursulin@sophos.com> writes: > On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: >> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: >> > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: >> > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: >> > > > I have basically built 2.6.35 with make oldconfig from a working >> > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I see >> > > > nothing after grub (have early printk and verbose bootup enabled), >> > > > just a blinking VGA cursor and CPU at 100%. >> > > >> > > Please copy kvm@vger.kernel.org on kvm issues. >> > > >> > > > CONFIG_PRINTK_TIME=y >> > > >> > > Try disabling this as a workaround. >> > >> > I am in the middle of a bisect run with five builds left to go, currently >> > I have: >> > >> > bad 537b60d17894b7c19a6060feae40299d7109d6e7 >> > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 >> >> Bisect is looking good, narrowed it to ten revisions, but I am not sure to >> make it to the end today: >> >> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea >> good 41d59102e146a4423a490b8eca68a5860af4fe1c > > Bisect points the finger to "x86, ioapic: In mpparse use mp_register_ioapic" > (cf7500c0ea133d66f8449d86392d83f840102632), so I am copying Eric. No idea > whether this commit is solely to blame or it is a combined interaction with > KVM, but I am sure you guys will know. > > If you want me to test something else please shout. Interesting. This is the second report I have heard of no VGA output and a hang early in boot, that was bisected to this commit. Since I could not reproduce it I was hoping it was a fluke with a single piece of hardware, but it appears not. There was in fact an off by one bug in that commit, but if that had been the issue 2.6.35 would have booted ok. There was nothing in that commit that should have prevented early output, and in fact I can boot with a very similar configuration. So I am trying to figure out what pieces are interacting to cause this failure mode to happen. What version of kvm are you running on your host (in case that matters)? I want to reproduce this myself so I can start guessing what weird interactions are going on. Eric ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 20:37 ` Eric W. Biederman @ 2010-08-04 8:09 ` Tvrtko Ursulin 0 siblings, 0 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-04 8:09 UTC (permalink / raw) To: Eric W. Biederman; +Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list [-- Attachment #1: Type: text/plain, Size: 2701 bytes --] On Tuesday 03 Aug 2010 21:37:06 Eric W. Biederman wrote: > Tvrtko Ursulin <tvrtko.ursulin@sophos.com> writes: > > On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > >> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > >> > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > >> > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > >> > > > I have basically built 2.6.35 with make oldconfig from a working > >> > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I > >> > > > see nothing after grub (have early printk and verbose bootup > >> > > > enabled), just a blinking VGA cursor and CPU at 100%. > >> > > > >> > > Please copy kvm@vger.kernel.org on kvm issues. > >> > > > >> > > > CONFIG_PRINTK_TIME=y > >> > > > >> > > Try disabling this as a workaround. > >> > > >> > I am in the middle of a bisect run with five builds left to go, > >> > currently I have: > >> > > >> > bad 537b60d17894b7c19a6060feae40299d7109d6e7 > >> > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > >> > >> Bisect is looking good, narrowed it to ten revisions, but I am not sure > >> to make it to the end today: > >> > >> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > >> good 41d59102e146a4423a490b8eca68a5860af4fe1c > > > > Bisect points the finger to "x86, ioapic: In mpparse use > > mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am > > copying Eric. No idea whether this commit is solely to blame or it is a > > combined interaction with KVM, but I am sure you guys will know. > > > > If you want me to test something else please shout. > > Interesting. This is the second report I have heard of no VGA output > and a hang early in boot, that was bisected to this commit. Since I > could not reproduce it I was hoping it was a fluke with a single piece > of hardware, but it appears not. > > There was in fact an off by one bug in that commit, but if that had > been the issue 2.6.35 would have booted ok. There was nothing in that > commit that should have prevented early output, and in fact I can boot > with a very similar configuration. So I am trying to figure out what > pieces are interacting to cause this failure mode to happen. > > What version of kvm are you running on your host (in case that matters)? > > I want to reproduce this myself so I can start guessing what weird > interactions are going on. Host is stock openSUSE 11.3 with kvm-0.12.3-2.9.x86_64 and kernel- desktop-2.6.34-12.3.x86_64. Plus a repeat of my .config if it helps. Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. [-- Attachment #2: .config --] [-- Type: text/x-mpsub, Size: 44346 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.35 # Tue Aug 3 10:23:00 2010 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y # CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_EARLY_RES=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y # CONFIG_TASK_DELAY_ACCT is not set CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set CONFIG_RCU_FAST_NO_HZ=y # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y # CONFIG_BLK_CGROUP is not set CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_PERF_COUNTERS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_SLOW_WORK=y # CONFIG_SLOW_WORK_DEBUG is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_BIGSMP is not set # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y # CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_PARAVIRT_GUEST=y # CONFIG_VMI is not set CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y # CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y CONFIG_PARAVIRT_SPINLOCKS=y CONFIG_PARAVIRT_CLOCK=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=y CONFIG_X86_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=5 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=2 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set # CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_X86_REBOOTFIXUPS=y # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_X86_PAE is not set # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_COMPACTION is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y # CONFIG_MEMORY_FAILURE is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set # # Power management and ACPI options # # CONFIG_PM is not set # CONFIG_SFI is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_INTEL_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set # CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_HYBLA is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_VENO is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_RPS=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set # CONFIG_RXKAD is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_VIRTIO_BLK=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set CONFIG_TIFM_CORE=m # CONFIG_TIFM_7XX1 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_CS5535_MFGPT is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_VMWARE_BALLOON is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=m # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set CONFIG_VIRTIO_NET=y # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set # CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_HW_RANDOM_VIA is not set # CONFIG_HW_RANDOM_VIRTIO is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_TCG_TPM=y CONFIG_TCG_TIS=y # CONFIG_TCG_NSC is not set # CONFIG_TCG_ATMEL is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m # CONFIG_I2C_HELPER_AUTO is not set # CONFIG_I2C_SMBUS is not set # # I2C Algorithms # # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_MFD_SUPPORT=y CONFIG_MFD_CORE=m # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS6507X is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TC35892 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_ABX500_CORE is not set CONFIG_LPC_SCH=m # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=1 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PROGEAR=m CONFIG_BACKLIGHT_MBP_NVIDIA=m CONFIG_BACKLIGHT_SAHARA=m # CONFIG_BACKLIGHT_ADP8860 is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=m # # Display hardware drivers # # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=m # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=m # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=m CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=y CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=m # CONFIG_FSCACHE_STATS is not set # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set # CONFIG_FSCACHE_OBJECT_LIST is not set CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m CONFIG_ECRYPT_FS=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m # CONFIG_LOGFS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_XATTRS is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 CONFIG_VXFS_FS=m CONFIG_MINIX_FS=m CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y # CONFIG_ROMFS_BACKED_BY_MTD is not set # CONFIG_ROMFS_BACKED_BY_BOTH is not set CONFIG_ROMFS_ON_BLOCK=y CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_V4_1 is not set # CONFIG_NFS_FSCACHE is not set CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_DFS_UPCALL=y CONFIG_CIFS_EXPERIMENTAL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y # CONFIG_NCPFS_SMALLDOS is not set CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set # CONFIG_AFS_FSCACHE is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400 # CONFIG_DEBUG_KMEMLEAK_TEST is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y # CONFIG_PROVE_RCU_REPEATEDLY is not set CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y # CONFIG_DEBUG_LOCKDEP is not set CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_FTRACE_NMI_ENTER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set CONFIG_TRACE_BRANCH_PROFILING=y # CONFIG_BRANCH_PROFILE_NONE is not set CONFIG_PROFILE_ANNOTATED_BRANCHES=y # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_BRANCH_TRACER is not set # CONFIG_KSYM_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_DYNAMIC_FTRACE=y # CONFIG_FUNCTION_PROFILER is not set CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_4KSTACKS=y CONFIG_DOUBLEFAULT=y # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set CONFIG_OPTIMIZE_INLINING=y # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_PATH=y # CONFIG_SECURITY_SELINUX is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set CONFIG_IMA=y CONFIG_IMA_MEASURE_PCR_IDX=10 CONFIG_IMA_AUDIT=y # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SALSA20_586=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_586=m # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=y CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_GEODE=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_VHOST_NET is not set # CONFIG_LGUEST is not set CONFIG_VIRTIO=y CONFIG_VIRTIO_RING=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 15:59 ` Tvrtko Ursulin 2010-08-03 20:37 ` Eric W. Biederman @ 2010-08-03 20:57 ` Yinghai Lu 2010-08-04 8:18 ` Tvrtko Ursulin 1 sibling, 1 reply; 21+ messages in thread From: Yinghai Lu @ 2010-08-03 20:57 UTC (permalink / raw) To: Tvrtko Ursulin Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman [-- Attachment #1: Type: text/plain, Size: 1578 bytes --] On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin <tvrtko.ursulin@sophos.com> wrote: > On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: >> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: >> > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: >> > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: >> > > > I have basically built 2.6.35 with make oldconfig from a working >> > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I see >> > > > nothing after grub (have early printk and verbose bootup enabled), >> > > > just a blinking VGA cursor and CPU at 100%. >> > > >> > > Please copy kvm@vger.kernel.org on kvm issues. >> > > >> > > > CONFIG_PRINTK_TIME=y >> > > >> > > Try disabling this as a workaround. >> > >> > I am in the middle of a bisect run with five builds left to go, currently >> > I have: >> > >> > bad 537b60d17894b7c19a6060feae40299d7109d6e7 >> > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 >> >> Bisect is looking good, narrowed it to ten revisions, but I am not sure to >> make it to the end today: >> >> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea >> good 41d59102e146a4423a490b8eca68a5860af4fe1c > > Bisect points the finger to "x86, ioapic: In mpparse use mp_register_ioapic" > (cf7500c0ea133d66f8449d86392d83f840102632), so I am copying Eric. No idea > whether this commit is solely to blame or it is a combined interaction with > KVM, but I am sure you guys will know. > > If you want me to test something else please shout. > please try attached patch, to see if it help. Yinghai [-- Attachment #2: smp_mptable_2.patch --] [-- Type: text/x-patch, Size: 3012 bytes --] [PATCH] x86: check if apic/pin is shared with legacy one fix system that external device that have io apic on apic0/pin(0-15) also for the io apic out of order system: <6>ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[0]) <6>IOAPIC[0]: apic_id 16, version 0, address 0xfecff000, GSI 0-2 <6>ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[3]) <6>IOAPIC[1]: apic_id 15, version 0, address 0xfec00000, GSI 3-38 <6>ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[39]) <6>IOAPIC[2]: apic_id 14, version 0, address 0xfec01000, GSI 39-74 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 4 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 5 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 6 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 7 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 6 global_irq 9 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 10 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 11 low edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 12 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 12 global_irq 15 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 13 global_irq 16 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 17 low edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 18 dfl dfl) after this patch will get apic0, pin0, GSI 0: irq 0+75 apic0, pin1, GSI 1: irq 1+75 apic0, pin2, GSI 2: irq 2 apic1, pin0, GSI 3: irq 3+75 apic1, pin5, GSI 8: irq 8+75 apic1, pin10,GSI 13: irq 13+75 apic1, pin11,GSI 14: irq 14+75 because mp_config_acpi_legacy_irqs will put apic0, pin2, irq2 in mp_irqs... so pin_2_irq_legacy will report 2. irq_to_gsi will still report 2. so it is right. gsi_to_irq will report 2. for 0, 1, 3, 8, 13, 14: still right Signed-off-by: Yinghai Lu <yinghai@kernel.org> --- arch/x86/kernel/apic/io_apic.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) Index: linux-2.6/arch/x86/kernel/apic/io_apic.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c +++ linux-2.6/arch/x86/kernel/apic/io_apic.c @@ -1013,6 +1013,28 @@ static inline int irq_trigger(int idx) return MPBIOS_trigger(idx); } +static int pin_2_irq_leagcy(int apic, int pin) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int bus = mp_irqs[i].srcbus; + + if (!test_bit(bus, mp_bus_not_pci)) + continue; + + if (mp_ioapics[apic].apicid != mp_irqs[i].dstapic) + continue; + + if (mp_irqs[i].dstirq != pin) + continue; + + return mp_irqs[i].srcbusirq; + } + + return -1; +} + static int pin_2_irq(int idx, int apic, int pin) { int irq; @@ -1029,10 +1051,13 @@ static int pin_2_irq(int idx, int apic, } else { u32 gsi = mp_gsi_routing[apic].gsi_base + pin; - if (gsi >= NR_IRQS_LEGACY) + if (gsi >= NR_IRQS_LEGACY) { irq = gsi; - else - irq = gsi_top + gsi; + } else { + irq = pin_2_irq_legacy(apic, pin); + if (irq < 0) + irq = gsi_top + gsi; + } } #ifdef CONFIG_X86_32 ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-03 20:57 ` Yinghai Lu @ 2010-08-04 8:18 ` Tvrtko Ursulin 2010-08-04 9:05 ` Yinghai Lu 0 siblings, 1 reply; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-04 8:18 UTC (permalink / raw) To: Yinghai Lu Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On Tuesday 03 Aug 2010 21:57:48 Yinghai Lu wrote: > On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin > > <tvrtko.ursulin@sophos.com> wrote: > > On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > >> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > >> > On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > >> > > On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > >> > > > I have basically built 2.6.35 with make oldconfig from a working > >> > > > 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I > >> > > > see nothing after grub (have early printk and verbose bootup > >> > > > enabled), just a blinking VGA cursor and CPU at 100%. > >> > > > >> > > Please copy kvm@vger.kernel.org on kvm issues. > >> > > > >> > > > CONFIG_PRINTK_TIME=y > >> > > > >> > > Try disabling this as a workaround. > >> > > >> > I am in the middle of a bisect run with five builds left to go, > >> > currently I have: > >> > > >> > bad 537b60d17894b7c19a6060feae40299d7109d6e7 > >> > good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > >> > >> Bisect is looking good, narrowed it to ten revisions, but I am not sure > >> to make it to the end today: > >> > >> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > >> good 41d59102e146a4423a490b8eca68a5860af4fe1c > > > > Bisect points the finger to "x86, ioapic: In mpparse use > > mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am > > copying Eric. No idea whether this commit is solely to blame or it is a > > combined interaction with KVM, but I am sure you guys will know. > > > > If you want me to test something else please shout. > > please try attached patch, to see if it help. No luck (no visible difference, no output on VGA or serial console). (Btw there is a typo in pin_2_irq_leagcy so that you do not push it directly). Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 8:18 ` Tvrtko Ursulin @ 2010-08-04 9:05 ` Yinghai Lu 2010-08-04 9:16 ` Tvrtko Ursulin 0 siblings, 1 reply; 21+ messages in thread From: Yinghai Lu @ 2010-08-04 9:05 UTC (permalink / raw) To: Tvrtko Ursulin Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On 08/04/2010 01:18 AM, Tvrtko Ursulin wrote: > On Tuesday 03 Aug 2010 21:57:48 Yinghai Lu wrote: >> On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin >> >> <tvrtko.ursulin@sophos.com> wrote: >>> On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: >>>> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: >>>>> On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: >>>>>> On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: >>>>>>> I have basically built 2.6.35 with make oldconfig from a working >>>>>>> 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I >>>>>>> see nothing after grub (have early printk and verbose bootup >>>>>>> enabled), just a blinking VGA cursor and CPU at 100%. >>>>>> >>>>>> Please copy kvm@vger.kernel.org on kvm issues. >>>>>> >>>>>>> CONFIG_PRINTK_TIME=y >>>>>> >>>>>> Try disabling this as a workaround. >>>>> >>>>> I am in the middle of a bisect run with five builds left to go, >>>>> currently I have: >>>>> >>>>> bad 537b60d17894b7c19a6060feae40299d7109d6e7 >>>>> good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 >>>> >>>> Bisect is looking good, narrowed it to ten revisions, but I am not sure >>>> to make it to the end today: >>>> >>>> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea >>>> good 41d59102e146a4423a490b8eca68a5860af4fe1c >>> >>> Bisect points the finger to "x86, ioapic: In mpparse use >>> mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am >>> copying Eric. No idea whether this commit is solely to blame or it is a >>> combined interaction with KVM, but I am sure you guys will know. >>> >>> If you want me to test something else please shout. >> >> please try attached patch, to see if it help. > > No luck (no visible difference, no output on VGA or serial console). (Btw > there is a typo in pin_2_irq_leagcy so that you do not push it directly). can you try current tip with earlyprintk=ttyS0,115200 or console=uart8250,io,0x3f8,115200? Thanks Yinghai ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 9:05 ` Yinghai Lu @ 2010-08-04 9:16 ` Tvrtko Ursulin 2010-08-04 9:19 ` Tvrtko Ursulin ` (2 more replies) 0 siblings, 3 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-04 9:16 UTC (permalink / raw) To: Yinghai Lu Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On Wednesday 04 Aug 2010 10:05:36 Yinghai Lu wrote: > On 08/04/2010 01:18 AM, Tvrtko Ursulin wrote: > > On Tuesday 03 Aug 2010 21:57:48 Yinghai Lu wrote: > >> On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin > >> > >> <tvrtko.ursulin@sophos.com> wrote: > >>> On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > >>>> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > >>>>> On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > >>>>>> On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > >>>>>>> I have basically built 2.6.35 with make oldconfig from a working > >>>>>>> 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I > >>>>>>> see nothing after grub (have early printk and verbose bootup > >>>>>>> enabled), just a blinking VGA cursor and CPU at 100%. > >>>>>> > >>>>>> Please copy kvm@vger.kernel.org on kvm issues. > >>>>>> > >>>>>>> CONFIG_PRINTK_TIME=y > >>>>>> > >>>>>> Try disabling this as a workaround. > >>>>> > >>>>> I am in the middle of a bisect run with five builds left to go, > >>>>> currently I have: > >>>>> > >>>>> bad 537b60d17894b7c19a6060feae40299d7109d6e7 > >>>>> good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > >>>> > >>>> Bisect is looking good, narrowed it to ten revisions, but I am not > >>>> sure to make it to the end today: > >>>> > >>>> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > >>>> good 41d59102e146a4423a490b8eca68a5860af4fe1c > >>> > >>> Bisect points the finger to "x86, ioapic: In mpparse use > >>> mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am > >>> copying Eric. No idea whether this commit is solely to blame or it is a > >>> combined interaction with KVM, but I am sure you guys will know. > >>> > >>> If you want me to test something else please shout. > >> > >> please try attached patch, to see if it help. > > > > No luck (no visible difference, no output on VGA or serial console). (Btw > > there is a typo in pin_2_irq_leagcy so that you do not push it directly). > > can you try current tip with > earlyprintk=ttyS0,115200 or console=uart8250,io,0x3f8,115200? Not the tip but 2.6.35 with earlyprintk=ttyS0,115200: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35 (root@kvm-ktest-32) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #4 SMP Wed Aug 4 09:15:10 BST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002bbfd000 (usable) [ 0.000000] BIOS-e820: 000000002bbfd000 - 000000002bc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x2bbfd max_arch_pfn = 0x100000 [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002bbfd000 (usable) [ 0.000000] modified: 000000002bbfd000 - 000000002bc00000 (reserved) [ 0.000000] modified: 00000000fffbc000 - 0000000100000000 (reserved) [ 0.000000] found SMP MP-table at [c00f85c0] f85c0 [ 0.000000] init_memory_mapping: 0000000000000000-000000002bbfd000 [ 0.000000] RAMDISK: 1fa29000 - 20d3e000 [ 0.000000] 699MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2bbfd000 [ 0.000000] low ram: 0 - 2bbfd000 [ 0.000000] kvm-clock: Using msrs 12 and 11 [ 0.000000] kvm-clock: cpu 0, msr 0:82a341, boot clock [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002bbfd [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002bbfd [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. [ 0.000000] BUG: unable to handle kernel paging request at ffffb030 [ 0.000000] IP: [<c011d136>] native_apic_mem_read+0x16/0x20 [ 0.000000] *pde = 00832067 *pte = 00000000 [ 0.000000] Oops: 0000 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.35 #4 /Bochs [ 0.000000] EIP: 0060:[<c011d136>] EFLAGS: 00010093 CPU: 0 [ 0.000000] EIP is at native_apic_mem_read+0x16/0x20 [ 0.000000] EAX: ffffb030 EBX: 00000001 ECX: c061f220 EDX: fffff000 [ 0.000000] ESI: 00000001 EDI: 00000000 EBP: c060bde8 ESP: c060bde4 [ 0.000000] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 0.000000] Process swapper (pid: 0, ti=c060b000 task=c061f220 task.ti=c060b000) [ 0.000000] Stack: [ 0.000000] c011c352 c060be34 c0686380 c0598971 00000000 00000000 c060be1a 00000000 [ 0.000000] <0> 00005000 00000046 c0124548 c01247e8 c060be28 c012a95c 00000005 00000000 [ 0.000000] <0> 00000001 00000000 00000000 00000001 c060be3c c0686502 c060be6c c06865ce [ 0.000000] Call Trace: [ 0.000000] [<c011c352>] ? get_physical_broadcast+0x22/0x50 [ 0.000000] [<c0686380>] ? io_apic_get_unique_id+0x78/0x1d1 [ 0.000000] [<c0124548>] ? native_set_pte_at+0x8/0x10 [ 0.000000] [<c01247e8>] ? native_flush_tlb_single+0x8/0x10 [ 0.000000] [<c012a95c>] ? set_pte_vaddr+0x6c/0x80 [ 0.000000] [<c0686502>] ? io_apic_unique_id+0x29/0x2b [ 0.000000] [<c06865ce>] ? mp_register_ioapic+0xca/0x11a [ 0.000000] [<c0683bfb>] ? MP_ioapic_info+0x44/0x4a [ 0.000000] [<c0684158>] ? default_get_smp_config+0x334/0x490 [ 0.000000] [<c068ff6c>] ? free_area_init_nodes+0x30c/0x314 [ 0.000000] [<c03e5599>] ? read_pci_config_16+0x9/0x40 [ 0.000000] [<c067cab7>] ? setup_arch+0xa04/0xa5e [ 0.000000] [<c0144e15>] ? vprintk+0x375/0x480 [ 0.000000] [<c01758db>] ? trace_hardirqs_off+0xb/0x10 [ 0.000000] [<c048fe0d>] ? _raw_spin_unlock_irqrestore+0x5d/0x70 [ 0.000000] [<c0679714>] ? start_kernel+0xdc/0x378 [ 0.000000] [<c06790d7>] ? i386_start_kernel+0xd7/0xdf [ 0.000000] Code: 4c 62 c0 8d 84 08 00 c0 ff ff 89 10 5d c3 8d b4 26 00 00 00 00 55 89 e5 e8 64 65 fe ff 8b 15 cc 4c 62 c0 5d 8d 84 10 00 c0 ff ff <8b> 00 c3 8d b4 26 00 00 00 00 55 89 e5 53 e8 43 65 fe ff 8b 15 [ 0.000000] EIP: [<c011d136>] native_apic_mem_read+0x16/0x20 SS:ESP 0068:c060bde4 [ 0.000000] CR2: 00000000ffffb030 [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] Pid: 0, comm: swapper Tainted: G D 2.6.35 #4 [ 0.000000] Call Trace: [ 0.000000] [<c048c225>] ? printk+0x1d/0x20 [ 0.000000] [<c048c18b>] panic+0x5a/0xd7 [ 0.000000] [<c0148b19>] do_exit+0x7a9/0x840 [ 0.000000] [<c0145059>] ? kmsg_dump+0x139/0x160 [ 0.000000] [<c048c225>] ? printk+0x1d/0x20 [ 0.000000] [<c0106b15>] oops_end+0x95/0xd0 [ 0.000000] [<c0125dc6>] no_context+0xc6/0x160 [ 0.000000] [<c0125f10>] __bad_area_nosemaphore+0xb0/0x160 [ 0.000000] [<c01245e8>] ? _paravirt_ident_32+0x8/0x10 [ 0.000000] [<c0125fd7>] bad_area_nosemaphore+0x17/0x20 [ 0.000000] [<c0126269>] do_page_fault+0xb9/0x410 [ 0.000000] [<c01261b0>] ? do_page_fault+0x0/0x410 [ 0.000000] [<c0490864>] error_code+0x78/0x80 [ 0.000000] [<c017007b>] ? timer_list_show+0x7cb/0xf00 [ 0.000000] [<c011d136>] ? native_apic_mem_read+0x16/0x20 [ 0.000000] [<c011c352>] ? get_physical_broadcast+0x22/0x50 [ 0.000000] [<c0686380>] io_apic_get_unique_id+0x78/0x1d1 [ 0.000000] [<c0124548>] ? native_set_pte_at+0x8/0x10 [ 0.000000] [<c01247e8>] ? native_flush_tlb_single+0x8/0x10 [ 0.000000] [<c012a95c>] ? set_pte_vaddr+0x6c/0x80 [ 0.000000] [<c0686502>] io_apic_unique_id+0x29/0x2b [ 0.000000] [<c06865ce>] mp_register_ioapic+0xca/0x11a [ 0.000000] [<c0683bfb>] MP_ioapic_info+0x44/0x4a [ 0.000000] [<c0684158>] default_get_smp_config+0x334/0x490 [ 0.000000] [<c068ff6c>] ? free_area_init_nodes+0x30c/0x314 [ 0.000000] [<c03e5599>] ? read_pci_config_16+0x9/0x40 [ 0.000000] [<c067cab7>] setup_arch+0xa04/0xa5e [ 0.000000] [<c0144e15>] ? vprintk+0x375/0x480 [ 0.000000] [<c01758db>] ? trace_hardirqs_off+0xb/0x10 [ 0.000000] [<c048fe0d>] ? _raw_spin_unlock_irqrestore+0x5d/0x70 [ 0.000000] [<c0679714>] start_kernel+0xdc/0x378 [ 0.000000] [<c06790d7>] i386_start_kernel+0xd7/0xdf [ 0.000000] Unknown interrupt or fault at: 00000246 00000060 c012422a [ 0.000000] Pid: 0, comm: swapper Tainted: G D 2.6.35 #4 [ 0.000000] Call Trace: [ 0.000000] [<c048c225>] ? printk+0x1d/0x20 [ 0.000000] [<c04844c1>] ignore_int+0x3d/0x46 [ 0.000000] [<c012422a>] ? native_irq_enable+0xa/0x10 [ 0.000000] [<c048c1f6>] ? panic+0xc5/0xd7 [ 0.000000] [<c048c1f6>] ? panic+0xc5/0xd7 [ 0.000000] [<c012422a>] ? native_irq_enable+0xa/0x10 [ 0.000000] [<c048c1fc>] ? panic+0xcb/0xd7 [ 0.000000] [<c0148b19>] do_exit+0x7a9/0x840 [ 0.000000] [<c0145059>] ? kmsg_dump+0x139/0x160 [ 0.000000] [<c048c225>] ? printk+0x1d/0x20 [ 0.000000] [<c0106b15>] oops_end+0x95/0xd0 [ 0.000000] [<c0125dc6>] no_context+0xc6/0x160 [ 0.000000] [<c0125f10>] __bad_area_nosemaphore+0xb0/0x160 [ 0.000000] [<c01245e8>] ? _paravirt_ident_32+0x8/0x10 [ 0.000000] [<c0125fd7>] bad_area_nosemaphore+0x17/0x20 [ 0.000000] [<c0126269>] do_page_fault+0xb9/0x410 [ 0.000000] [<c01261b0>] ? do_page_fault+0x0/0x410 [ 0.000000] [<c0490864>] error_code+0x78/0x80 [ 0.000000] [<c017007b>] ? timer_list_show+0x7cb/0xf00 [ 0.000000] [<c011d136>] ? native_apic_mem_read+0x16/0x20 [ 0.000000] [<c011c352>] ? get_physical_broadcast+0x22/0x50 [ 0.000000] [<c0686380>] io_apic_get_unique_id+0x78/0x1d1 [ 0.000000] [<c0124548>] ? native_set_pte_at+0x8/0x10 [ 0.000000] [<c01247e8>] ? native_flush_tlb_single+0x8/0x10 [ 0.000000] [<c012a95c>] ? set_pte_vaddr+0x6c/0x80 [ 0.000000] [<c0686502>] io_apic_unique_id+0x29/0x2b [ 0.000000] [<c06865ce>] mp_register_ioapic+0xca/0x11a [ 0.000000] [<c0683bfb>] MP_ioapic_info+0x44/0x4a [ 0.000000] [<c0684158>] default_get_smp_config+0x334/0x490 [ 0.000000] [<c068ff6c>] ? free_area_init_nodes+0x30c/0x314 [ 0.000000] [<c03e5599>] ? read_pci_config_16+0x9/0x40 [ 0.000000] [<c067cab7>] setup_arch+0xa04/0xa5e [ 0.000000] [<c0144e15>] ? vprintk+0x375/0x480 [ 0.000000] [<c01758db>] ? trace_hardirqs_off+0xb/0x10 [ 0.000000] [<c048fe0d>] ? _raw_spin_unlock_irqrestore+0x5d/0x70 [ 0.000000] [<c0679714>] start_kernel+0xdc/0x378 [ 0.000000] [<c06790d7>] i386_start_kernel+0xd7/0xdf Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 9:16 ` Tvrtko Ursulin @ 2010-08-04 9:19 ` Tvrtko Ursulin 2010-08-04 9:34 ` Yinghai Lu 2010-08-04 9:36 ` Gleb Natapov 2 siblings, 0 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-04 9:19 UTC (permalink / raw) To: Yinghai Lu Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On Wednesday 04 Aug 2010 10:16:08 Tvrtko Ursulin wrote: > On Wednesday 04 Aug 2010 10:05:36 Yinghai Lu wrote: > > On 08/04/2010 01:18 AM, Tvrtko Ursulin wrote: > > > On Tuesday 03 Aug 2010 21:57:48 Yinghai Lu wrote: > > >> On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin > > >> > > >> <tvrtko.ursulin@sophos.com> wrote: > > >>> On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > > >>>> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > > >>>>> On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > > >>>>>> On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > > >>>>>>> I have basically built 2.6.35 with make oldconfig from a working > > >>>>>>> 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I > > >>>>>>> see nothing after grub (have early printk and verbose bootup > > >>>>>>> enabled), just a blinking VGA cursor and CPU at 100%. > > >>>>>> > > >>>>>> Please copy kvm@vger.kernel.org on kvm issues. > > >>>>>> > > >>>>>>> CONFIG_PRINTK_TIME=y > > >>>>>> > > >>>>>> Try disabling this as a workaround. > > >>>>> > > >>>>> I am in the middle of a bisect run with five builds left to go, > > >>>>> currently I have: > > >>>>> > > >>>>> bad 537b60d17894b7c19a6060feae40299d7109d6e7 > > >>>>> good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > > >>>> > > >>>> Bisect is looking good, narrowed it to ten revisions, but I am not > > >>>> sure to make it to the end today: > > >>>> > > >>>> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > > >>>> good 41d59102e146a4423a490b8eca68a5860af4fe1c > > >>> > > >>> Bisect points the finger to "x86, ioapic: In mpparse use > > >>> mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I > > >>> am copying Eric. No idea whether this commit is solely to blame or > > >>> it is a combined interaction with KVM, but I am sure you guys will > > >>> know. > > >>> > > >>> If you want me to test something else please shout. > > >> > > >> please try attached patch, to see if it help. > > > > > > No luck (no visible difference, no output on VGA or serial console). > > > (Btw there is a typo in pin_2_irq_leagcy so that you do not push it > > > directly). > > > > can you try current tip with > > earlyprintk=ttyS0,115200 or console=uart8250,io,0x3f8,115200? > > Not the tip but 2.6.35 with earlyprintk=ttyS0,115200: Correction, crash log was from 2.6.35 plus your smp_mptable_2.patch. Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 9:16 ` Tvrtko Ursulin 2010-08-04 9:19 ` Tvrtko Ursulin @ 2010-08-04 9:34 ` Yinghai Lu 2010-08-04 9:44 ` Tvrtko Ursulin 2010-08-04 9:36 ` Gleb Natapov 2 siblings, 1 reply; 21+ messages in thread From: Yinghai Lu @ 2010-08-04 9:34 UTC (permalink / raw) To: Tvrtko Ursulin Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On 08/04/2010 02:16 AM, Tvrtko Ursulin wrote: > On Wednesday 04 Aug 2010 10:05:36 Yinghai Lu wrote: >> On 08/04/2010 01:18 AM, Tvrtko Ursulin wrote: >>> On Tuesday 03 Aug 2010 21:57:48 Yinghai Lu wrote: >>>> On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin >>>> >>>> <tvrtko.ursulin@sophos.com> wrote: >>>>> On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: >>>>>> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: >>>>>>> On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: >>>>>>>> On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: >>>>>>>>> I have basically built 2.6.35 with make oldconfig from a working >>>>>>>>> 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I >>>>>>>>> see nothing after grub (have early printk and verbose bootup >>>>>>>>> enabled), just a blinking VGA cursor and CPU at 100%. >>>>>>>> >>>>>>>> Please copy kvm@vger.kernel.org on kvm issues. >>>>>>>> >>>>>>>>> CONFIG_PRINTK_TIME=y >>>>>>>> >>>>>>>> Try disabling this as a workaround. >>>>>>> >>>>>>> I am in the middle of a bisect run with five builds left to go, >>>>>>> currently I have: >>>>>>> >>>>>>> bad 537b60d17894b7c19a6060feae40299d7109d6e7 >>>>>>> good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 >>>>>> >>>>>> Bisect is looking good, narrowed it to ten revisions, but I am not >>>>>> sure to make it to the end today: >>>>>> >>>>>> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea >>>>>> good 41d59102e146a4423a490b8eca68a5860af4fe1c >>>>> >>>>> Bisect points the finger to "x86, ioapic: In mpparse use >>>>> mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am >>>>> copying Eric. No idea whether this commit is solely to blame or it is a >>>>> combined interaction with KVM, but I am sure you guys will know. >>>>> >>>>> If you want me to test something else please shout. >>>> >>>> please try attached patch, to see if it help. >>> >>> No luck (no visible difference, no output on VGA or serial console). (Btw >>> there is a typo in pin_2_irq_leagcy so that you do not push it directly). >> >> can you try current tip with >> earlyprintk=ttyS0,115200 or console=uart8250,io,0x3f8,115200? > > Not the tip but 2.6.35 with earlyprintk=ttyS0,115200: > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.35 (root@kvm-ktest-32) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #4 > SMP Wed Aug 4 09:15:10 BST 2010 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000002bbfd000 (usable) > [ 0.000000] BIOS-e820: 000000002bbfd000 - 000000002bc00000 (reserved) > [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) > [ 0.000000] bootconsole [earlyser0] enabled > [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! > [ 0.000000] DMI 2.4 present. > [ 0.000000] last_pfn = 0x2bbfd max_arch_pfn = 0x100000 > [ 0.000000] PAT not supported by CPU. > [ 0.000000] Scanning 1 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) > [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) > [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) > [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 000000002bbfd000 (usable) > [ 0.000000] modified: 000000002bbfd000 - 000000002bc00000 (reserved) > [ 0.000000] modified: 00000000fffbc000 - 0000000100000000 (reserved) > [ 0.000000] found SMP MP-table at [c00f85c0] f85c0 > [ 0.000000] init_memory_mapping: 0000000000000000-000000002bbfd000 > [ 0.000000] RAMDISK: 1fa29000 - 20d3e000 > [ 0.000000] 699MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 2bbfd000 > [ 0.000000] low ram: 0 - 2bbfd000 > [ 0.000000] kvm-clock: Using msrs 12 and 11 > [ 0.000000] kvm-clock: cpu 0, msr 0:82a341, boot clock > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000001 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x0002bbfd > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000001 -> 0x00000002 > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0002bbfd > [ 0.000000] Using APIC driver default > [ 0.000000] Intel MultiProcessor Specification v1.4 > [ 0.000000] Virtual Wire compatibility mode. > [ 0.000000] MPTABLE: OEM ID: BOCHSCPU > [ 0.000000] MPTABLE: Product ID: 0.1 > [ 0.000000] MPTABLE: APIC at: 0xFEE00000 > [ 0.000000] Processor #0 (Bootup-CPU) > [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. so your host is 32bit or 64bit? can you use working 32bit guest to dump mptable like "debug apic=debug acpi=off earlyprintk..." ? Yinghai ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 9:34 ` Yinghai Lu @ 2010-08-04 9:44 ` Tvrtko Ursulin 0 siblings, 0 replies; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-04 9:44 UTC (permalink / raw) To: Yinghai Lu Cc: Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On Wednesday 04 Aug 2010 10:34:28 Yinghai Lu wrote: [snip] > so your host is 32bit or 64bit? Host is 64-bit. > can you use working 32bit guest to dump mptable like "debug apic=debug > acpi=off earlyprintk..." ? This? From 2.6.34... [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f85d0-f86b8 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is ISA [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 04, APIC ID 1, APIC INT 09 [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 0c, APIC ID 1, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 10, APIC ID 1, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 00, APIC ID 1, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 01, APIC ID 1, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 03, APIC ID 1, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 04, APIC ID 1, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 05, APIC ID 1, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 06, APIC ID 1, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 07, APIC ID 1, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 08, APIC ID 1, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0a, APIC ID 1, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0c, APIC ID 1, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0d, APIC ID 1, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0e, APIC ID 1, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0f, APIC ID 1, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 ... [ 0.116253] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.117328] Getting VERSION: 50014 [ 0.118109] Getting VERSION: 50014 [ 0.118888] Getting ID: 0 [ 0.119553] Getting ID: f000000 [ 0.120021] Getting LVT0: 8700 [ 0.120749] Getting LVT1: 8400 [ 0.122213] enabled ExtINT on CPU#0 [ 0.124650] ENABLING IO-APIC IRQs [ 0.125451] Setting 1 in the phys_id_present_map [ 0.126393] ...changing IO-APIC physical APIC ID to 1 ... ok. [ 0.127575] init IO_APIC IRQs [ 0.128011] 1-0 (apicid-pin) not connected [ 0.128981] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.130542] IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.132030] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.133591] IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.135128] IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.136042] IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.137580] IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.140026] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.141626] IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.144026] IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.145586] IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:1 Active:0) [ 0.147153] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.148026] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.149605] IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.152028] IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.154255] 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected [ 0.156173] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.157281] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 [ 0.158645] Using local APIC timer interrupts. [ 0.158646] calibrating APIC timer ... [ 0.164000] ... lapic delta = 6250358 [ 0.164000] ..... delta 6250358 [ 0.164000] ..... mult: 268434054 [ 0.164000] ..... calibration result: 4000229 [ 0.164000] ..... CPU clock speed is 2926.0767 MHz. [ 0.164000] ..... host bus clock speed is 1000.0229 MHz. [ 0.164000] ... verify APIC timer [ 0.274657] ... jiffies delta = 25 [ 0.275438] ... jiffies result ok [ 0.276577] Brought up 1 CPUs [ 0.277281] Total of 1 processors activated (5852.84 BogoMIPS). ... [ 0.356006] printing PIC contents [ 0.357286] ... PIC IMR: fffb [ 0.358013] ... PIC IRR: 0001 [ 0.358736] ... PIC ISR: 0000 [ 0.359453] ... PIC ELCR: 0c00 [ 0.360023] printing local APIC contents on CPU#0/0: [ 0.360998] ... APIC ID: 00000000 (0) [ 0.361859] ... APIC VERSION: 00050014 [ 0.362734] ... APIC TASKPRI: 00000000 (00) [ 0.363607] ... APIC PROCPRI: 00000000 [ 0.364000] ... APIC LDR: 01000000 [ 0.364000] ... APIC DFR: ffffffff [ 0.364000] ... APIC SPIV: 000001ff [ 0.364000] ... APIC ISR field: [ 0.364000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.364000] ... APIC TMR field: [ 0.364000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.364000] ... APIC IRR field: [ 0.364000] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.364000] ... APIC ESR: 00000000 [ 0.364000] ... APIC ICR: 000c4610 [ 0.364000] ... APIC ICR2: 00000000 [ 0.364000] ... APIC LVTT: 000200ef [ 0.364000] ... APIC LVTPC: 00010000 [ 0.364000] ... APIC LVT0: 00010700 [ 0.364000] ... APIC LVT1: 00000400 [ 0.364000] ... APIC LVTERR: 000000fe [ 0.364000] ... APIC TMICT: 0003d09e [ 0.364000] ... APIC TMCCT: 0002c433 [ 0.364000] ... APIC TDCR: 00000003 [ 0.364000] [ 0.368005] number of MP IRQ sources: 16. [ 0.372004] number of IO-APIC #1 registers: 24. [ 0.372920] testing the IO APIC....................... [ 0.373935] [ 0.374439] IO APIC #1...... [ 0.375131] .... register #00: 01000000 [ 0.376002] ....... : physical APIC id: 01 [ 0.376893] ....... : Delivery Type: 0 [ 0.377738] ....... : LTS : 0 [ 0.378626] .... register #01: 00170011 [ 0.379477] ....... : max redirection entries: 0017 [ 0.380003] ....... : PRQ implemented: 0 [ 0.380872] ....... : IO APIC version: 0011 [ 0.381783] .... register #02: 01000000 [ 0.382604] ....... : arbitration: 01 [ 0.384002] .... IRQ redirection table: [ 0.384825] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 0.385880] 00 000 1 0 0 0 0 0 0 00 [ 0.386972] 01 001 0 0 0 0 0 1 1 31 [ 0.388785] 02 001 0 0 0 0 0 1 1 30 [ 0.389908] 03 001 0 0 0 0 0 1 1 33 [ 0.390997] 04 001 0 0 0 0 0 1 1 34 [ 0.392020] 05 001 0 0 0 0 0 1 1 35 [ 0.393111] 06 001 0 0 0 0 0 1 1 36 [ 0.394199] 07 001 0 0 0 0 0 1 1 37 [ 0.395288] 08 001 0 0 0 0 0 1 1 38 [ 0.396016] 09 001 1 1 0 0 0 1 1 39 [ 0.397169] 0a 001 0 0 0 0 0 1 1 3A [ 0.398262] 0b 001 1 1 0 0 0 1 1 3B [ 0.399348] 0c 001 0 0 0 0 0 1 1 3C [ 0.400753] 0d 001 0 0 0 0 0 1 1 3D [ 0.401844] 0e 001 0 0 0 0 0 1 1 3E [ 0.402937] 0f 001 0 0 0 0 0 1 1 3F [ 0.404016] 10 000 1 0 0 0 0 0 0 00 [ 0.405104] 11 000 1 0 0 0 0 0 0 00 [ 0.406229] 12 000 1 0 0 0 0 0 0 00 [ 0.407330] 13 000 1 0 0 0 0 0 0 00 [ 0.408759] 14 000 1 0 0 0 0 0 0 00 [ 0.410255] 15 000 1 0 0 0 0 0 0 00 [ 0.411355] 16 000 1 0 0 0 0 0 0 00 [ 0.412017] 17 000 1 0 0 0 0 0 0 00 [ 0.413101] IRQ to pin mappings: [ 0.413843] IRQ0 -> 0:2 [ 0.414758] IRQ1 -> 0:1 [ 0.416003] IRQ3 -> 0:3 [ 0.416784] IRQ4 -> 0:4 [ 0.417571] IRQ5 -> 0:5 [ 0.419026] IRQ6 -> 0:6 [ 0.419827] IRQ7 -> 0:7 [ 0.420495] IRQ8 -> 0:8 [ 0.421270] IRQ9 -> 0:9 [ 0.422058] IRQ10 -> 0:10 [ 0.422871] IRQ11 -> 0:11 [ 0.423673] IRQ12 -> 0:12 [ 0.424580] IRQ13 -> 0:13 [ 0.425387] IRQ14 -> 0:14 [ 0.426182] IRQ15 -> 0:15 [ 0.427028] .................................... done. Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 9:16 ` Tvrtko Ursulin 2010-08-04 9:19 ` Tvrtko Ursulin 2010-08-04 9:34 ` Yinghai Lu @ 2010-08-04 9:36 ` Gleb Natapov 2010-08-04 10:37 ` Eric W. Biederman 2 siblings, 1 reply; 21+ messages in thread From: Gleb Natapov @ 2010-08-04 9:36 UTC (permalink / raw) To: Tvrtko Ursulin Cc: Yinghai Lu, Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Eric W. Biederman On Wed, Aug 04, 2010 at 10:16:08AM +0100, Tvrtko Ursulin wrote: > On Wednesday 04 Aug 2010 10:05:36 Yinghai Lu wrote: > > On 08/04/2010 01:18 AM, Tvrtko Ursulin wrote: > > > On Tuesday 03 Aug 2010 21:57:48 Yinghai Lu wrote: > > >> On Tue, Aug 3, 2010 at 8:59 AM, Tvrtko Ursulin > > >> > > >> <tvrtko.ursulin@sophos.com> wrote: > > >>> On Tuesday 03 Aug 2010 16:17:20 Tvrtko Ursulin wrote: > > >>>> On Tuesday 03 Aug 2010 15:57:03 Tvrtko Ursulin wrote: > > >>>>> On Tuesday 03 Aug 2010 15:51:08 Avi Kivity wrote: > > >>>>>> On 08/03/2010 12:28 PM, Tvrtko Ursulin wrote: > > >>>>>>> I have basically built 2.6.35 with make oldconfig from a working > > >>>>>>> 2.6.34. Latter works fine in kvm while 2.6.35 hangs very early. I > > >>>>>>> see nothing after grub (have early printk and verbose bootup > > >>>>>>> enabled), just a blinking VGA cursor and CPU at 100%. > > >>>>>> > > >>>>>> Please copy kvm@vger.kernel.org on kvm issues. > > >>>>>> > > >>>>>>> CONFIG_PRINTK_TIME=y > > >>>>>> > > >>>>>> Try disabling this as a workaround. > > >>>>> > > >>>>> I am in the middle of a bisect run with five builds left to go, > > >>>>> currently I have: > > >>>>> > > >>>>> bad 537b60d17894b7c19a6060feae40299d7109d6e7 > > >>>>> good 93c9d7f60c0cb7715890b1f9e159da6f4d1f5a65 > > >>>> > > >>>> Bisect is looking good, narrowed it to ten revisions, but I am not > > >>>> sure to make it to the end today: > > >>>> > > >>>> bad cb41838bbc4403f7270a94b93a9a0d9fc9c2e7ea > > >>>> good 41d59102e146a4423a490b8eca68a5860af4fe1c > > >>> > > >>> Bisect points the finger to "x86, ioapic: In mpparse use > > >>> mp_register_ioapic" (cf7500c0ea133d66f8449d86392d83f840102632), so I am > > >>> copying Eric. No idea whether this commit is solely to blame or it is a > > >>> combined interaction with KVM, but I am sure you guys will know. > > >>> > > >>> If you want me to test something else please shout. > > >> > > >> please try attached patch, to see if it help. > > > > > > No luck (no visible difference, no output on VGA or serial console). (Btw > > > there is a typo in pin_2_irq_leagcy so that you do not push it directly). > > > > can you try current tip with > > earlyprintk=ttyS0,115200 or console=uart8250,io,0x3f8,115200? > > Not the tip but 2.6.35 with earlyprintk=ttyS0,115200: > > [ 0.000000] Processor #0 (Bootup-CPU) > [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. > [ 0.000000] BUG: unable to handle kernel paging request at ffffb030 > [ 0.000000] IP: [<c011d136>] native_apic_mem_read+0x16/0x20 > [ 0.000000] *pde = 00832067 *pte = 00000000 Accessing APIC version register before APIC is mapped. -- Gleb. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 9:36 ` Gleb Natapov @ 2010-08-04 10:37 ` Eric W. Biederman 2010-08-04 10:46 ` Tvrtko Ursulin 0 siblings, 1 reply; 21+ messages in thread From: Eric W. Biederman @ 2010-08-04 10:37 UTC (permalink / raw) To: Gleb Natapov Cc: Tvrtko Ursulin, Yinghai Lu, Avi Kivity, linux-kernel@vger.kernel.org, KVM list Gleb Natapov <gleb@redhat.com> writes: > On Wed, Aug 04, 2010 at 10:16:08AM +0100, Tvrtko Ursulin wrote: >> >> Not the tip but 2.6.35 with earlyprintk=ttyS0,115200: >> >> [ 0.000000] Processor #0 (Bootup-CPU) >> [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. >> [ 0.000000] BUG: unable to handle kernel paging request at ffffb030 >> [ 0.000000] IP: [<c011d136>] native_apic_mem_read+0x16/0x20 >> [ 0.000000] *pde = 00832067 *pte = 00000000 > Accessing APIC version register before APIC is mapped. Yep. I see it now. We have some of the silliest code. We only go down this path for certain revs of Intel cpus, and I double checked this change on an AMD cpu which explains why I missed hitting this case. The call path that is new in they bisected commit is: MP_ioapic_info() mp_register_ioapic() io_apic_unique_id() io_apic_get_unique_id() get_physical_broadcast() modern_apic() lapic_get_version() apic_read(APIC_LVR) Tvrtko can you test this patch and verify it fixes the kvm booting issue? This patch just maps the lapic early in the mmparse.c just like we do in acpi/boot.c when parsing the acpi tables. Eric --- diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index a96489e..c07e513 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1606,7 +1606,7 @@ void __init init_apic_mappings(void) * acpi lapic path already maps that address in * acpi_register_lapic_address() */ - if (!acpi_lapic) + if (!acpi_lapic && !smp_found_config) set_fixmap_nocache(FIX_APIC_BASE, apic_phys); apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d86dbf7..d7b6f7f 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -274,6 +274,18 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt) void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { } +static void __init smp_register_lapic_address(unsigned long address) +{ + mp_lapic_addr = address; + + set_fixmap_nocache(FIX_APIC_BASE, address); + if (boot_cpu_physical_apicid == -1U) { + boot_cpu_physical_apicid = read_apic_id(); + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); + } +} + static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) { char str[16]; @@ -295,6 +307,10 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) if (early) return 1; + /* Initialize the lapic mapping */ + if (!acpi_lapic) + smp_register_lapic_address(mpc->lapic); + if (mpc->oemptr) x86_init.mpparse.smp_read_mpc_oem(mpc); ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: 2.6.35 hangs on early boot in KVM 2010-08-04 10:37 ` Eric W. Biederman @ 2010-08-04 10:46 ` Tvrtko Ursulin 2010-08-04 20:30 ` [PATCH] x86/apic: Map the local apic when parsing the MP table Eric W. Biederman 0 siblings, 1 reply; 21+ messages in thread From: Tvrtko Ursulin @ 2010-08-04 10:46 UTC (permalink / raw) To: Eric W. Biederman Cc: Gleb Natapov, Yinghai Lu, Avi Kivity, linux-kernel@vger.kernel.org, KVM list On Wednesday 04 Aug 2010 11:37:43 Eric W. Biederman wrote: > Gleb Natapov <gleb@redhat.com> writes: > > On Wed, Aug 04, 2010 at 10:16:08AM +0100, Tvrtko Ursulin wrote: > >> Not the tip but 2.6.35 with earlyprintk=ttyS0,115200: > >> > >> [ 0.000000] Processor #0 (Bootup-CPU) > >> [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. > >> [ 0.000000] BUG: unable to handle kernel paging request at ffffb030 > >> [ 0.000000] IP: [<c011d136>] native_apic_mem_read+0x16/0x20 > >> [ 0.000000] *pde = 00832067 *pte = 00000000 > > > > Accessing APIC version register before APIC is mapped. > > Yep. I see it now. We have some of the silliest code. We only > go down this path for certain revs of Intel cpus, and I double checked > this change on an AMD cpu which explains why I missed hitting this > case. > > The call path that is new in they bisected commit is: > MP_ioapic_info() > mp_register_ioapic() > io_apic_unique_id() > io_apic_get_unique_id() > get_physical_broadcast() > modern_apic() > lapic_get_version() > apic_read(APIC_LVR) > > > Tvrtko can you test this patch and verify it fixes the kvm booting > issue? > > This patch just maps the lapic early in the mmparse.c just like we > do in acpi/boot.c when parsing the acpi tables. Boots fine, thanks! Tvrtko Sophos Plc, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, United Kingdom. Company Reg No 2096520. VAT Reg No GB 348 3873 20. ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH] x86/apic: Map the local apic when parsing the MP table. 2010-08-04 10:46 ` Tvrtko Ursulin @ 2010-08-04 20:30 ` Eric W. Biederman 2010-08-04 21:49 ` Yinghai Lu 0 siblings, 1 reply; 21+ messages in thread From: Eric W. Biederman @ 2010-08-04 20:30 UTC (permalink / raw) To: Ingo Molnar, Thomas Renninger, H. Peter Anvin Cc: Tvrtko Ursulin, Gleb Natapov, Yinghai Lu, Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Rafael J. Wysocki, David Hill This fixes a regression in 2.6.35 from 2.6.34, that is present for select models of Intel cpus when people are using an MP table. The commit cf7500c0ea133d66f8449d86392d83f840102632 "x86, ioapic: In mpparse use mp_register_ioapic" started calling mp_register_ioapic from MP_ioapic_info. An extremely simple change that was obviously correct. Unfortunately mp_register_ioapic did just a little more than the previous hand crafted code and so we gained this call path. The problem call path is: MP_ioapic_info() mp_register_ioapic() io_apic_unique_id() io_apic_get_unique_id() get_physical_broadcast() modern_apic() lapic_get_version() apic_read(APIC_LVR) Which turned out to be a problem because the local apic was not mapped, at that point, unlike the similar point in the ACPI parsing code. This problem is fixed by mapping the local apic when parsing the mptable as soon as we reasonably can. Looking at the number of places we setup the fixmap for the local apic, I see some serious simplification opportunities. For the moment except for not duplicating the setting up of the fixmap in init_apic_mappings, I have not acted on them. The regression from 2.6.34 is tracked in bug https://bugzilla.kernel.org/show_bug.cgi?id=16173 Cc: stable@kernel.org Reported-by: David Hill <hilld@binarystorm.net> Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> --- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/mpparse.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index a96489e..c07e513 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1606,7 +1606,7 @@ void __init init_apic_mappings(void) * acpi lapic path already maps that address in * acpi_register_lapic_address() */ - if (!acpi_lapic) + if (!acpi_lapic && !smp_found_config) set_fixmap_nocache(FIX_APIC_BASE, apic_phys); apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d86dbf7..d7b6f7f 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -274,6 +274,18 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt) void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { } +static void __init smp_register_lapic_address(unsigned long address) +{ + mp_lapic_addr = address; + + set_fixmap_nocache(FIX_APIC_BASE, address); + if (boot_cpu_physical_apicid == -1U) { + boot_cpu_physical_apicid = read_apic_id(); + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); + } +} + static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) { char str[16]; @@ -295,6 +307,10 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) if (early) return 1; + /* Initialize the lapic mapping */ + if (!acpi_lapic) + smp_register_lapic_address(mpc->lapic); + if (mpc->oemptr) x86_init.mpparse.smp_read_mpc_oem(mpc); -- 1.6.5.2.143.g8cc62 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH] x86/apic: Map the local apic when parsing the MP table. 2010-08-04 20:30 ` [PATCH] x86/apic: Map the local apic when parsing the MP table Eric W. Biederman @ 2010-08-04 21:49 ` Yinghai Lu 0 siblings, 0 replies; 21+ messages in thread From: Yinghai Lu @ 2010-08-04 21:49 UTC (permalink / raw) To: Eric W. Biederman Cc: Ingo Molnar, Thomas Renninger, H. Peter Anvin, Tvrtko Ursulin, Gleb Natapov, Avi Kivity, linux-kernel@vger.kernel.org, KVM list, Rafael J. Wysocki, David Hill On 08/04/2010 01:30 PM, Eric W. Biederman wrote: > > This fixes a regression in 2.6.35 from 2.6.34, that is > present for select models of Intel cpus when people are > using an MP table. > > The commit cf7500c0ea133d66f8449d86392d83f840102632 > "x86, ioapic: In mpparse use mp_register_ioapic" started > calling mp_register_ioapic from MP_ioapic_info. An extremely > simple change that was obviously correct. Unfortunately > mp_register_ioapic did just a little more than the previous > hand crafted code and so we gained this call path. > > The problem call path is: > MP_ioapic_info() > mp_register_ioapic() > io_apic_unique_id() > io_apic_get_unique_id() > get_physical_broadcast() > modern_apic() > lapic_get_version() > apic_read(APIC_LVR) > > Which turned out to be a problem because the local apic > was not mapped, at that point, unlike the similar point > in the ACPI parsing code. > > This problem is fixed by mapping the local apic when > parsing the mptable as soon as we reasonably can. > > Looking at the number of places we setup the fixmap for > the local apic, I see some serious simplification opportunities. > For the moment except for not duplicating the setting up of the > fixmap in init_apic_mappings, I have not acted on them. > > The regression from 2.6.34 is tracked in bug > https://bugzilla.kernel.org/show_bug.cgi?id=16173 > > Cc: stable@kernel.org > Reported-by: David Hill <hilld@binarystorm.net> > Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> > Tested-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> > Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> > --- > arch/x86/kernel/apic/apic.c | 2 +- > arch/x86/kernel/mpparse.c | 16 ++++++++++++++++ > 2 files changed, 17 insertions(+), 1 deletions(-) > > diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c > index a96489e..c07e513 100644 > --- a/arch/x86/kernel/apic/apic.c > +++ b/arch/x86/kernel/apic/apic.c > @@ -1606,7 +1606,7 @@ void __init init_apic_mappings(void) > * acpi lapic path already maps that address in > * acpi_register_lapic_address() > */ > - if (!acpi_lapic) > + if (!acpi_lapic && !smp_found_config) > set_fixmap_nocache(FIX_APIC_BASE, apic_phys); > > apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", > diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c > index d86dbf7..d7b6f7f 100644 > --- a/arch/x86/kernel/mpparse.c > +++ b/arch/x86/kernel/mpparse.c > @@ -274,6 +274,18 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt) > > void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { } > > +static void __init smp_register_lapic_address(unsigned long address) > +{ > + mp_lapic_addr = address; > + > + set_fixmap_nocache(FIX_APIC_BASE, address); > + if (boot_cpu_physical_apicid == -1U) { > + boot_cpu_physical_apicid = read_apic_id(); > + apic_version[boot_cpu_physical_apicid] = > + GET_APIC_VERSION(apic_read(APIC_LVR)); > + } > +} > + > static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) > { > char str[16]; > @@ -295,6 +307,10 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) > if (early) > return 1; > > + /* Initialize the lapic mapping */ > + if (!acpi_lapic) > + smp_register_lapic_address(mpc->lapic); > + > if (mpc->oemptr) > x86_init.mpparse.smp_read_mpc_oem(mpc); > Acked-by: Yinghai Lu <yinghai@kernel.org> will send out another two patches on top this one for cleanup. Yinghai ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2010-08-04 21:51 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <201008031028.57263.tvrtko.ursulin@sophos.com>
2010-08-03 14:51 ` 2.6.35 hangs on early boot in KVM Avi Kivity
2010-08-03 14:57 ` Tvrtko Ursulin
2010-08-03 15:17 ` Tvrtko Ursulin
2010-08-03 15:31 ` Tvrtko Ursulin
2010-08-03 15:49 ` Borislav Petkov
2010-08-03 16:01 ` Tvrtko Ursulin
2010-08-03 15:59 ` Tvrtko Ursulin
2010-08-03 20:37 ` Eric W. Biederman
2010-08-04 8:09 ` Tvrtko Ursulin
2010-08-03 20:57 ` Yinghai Lu
2010-08-04 8:18 ` Tvrtko Ursulin
2010-08-04 9:05 ` Yinghai Lu
2010-08-04 9:16 ` Tvrtko Ursulin
2010-08-04 9:19 ` Tvrtko Ursulin
2010-08-04 9:34 ` Yinghai Lu
2010-08-04 9:44 ` Tvrtko Ursulin
2010-08-04 9:36 ` Gleb Natapov
2010-08-04 10:37 ` Eric W. Biederman
2010-08-04 10:46 ` Tvrtko Ursulin
2010-08-04 20:30 ` [PATCH] x86/apic: Map the local apic when parsing the MP table Eric W. Biederman
2010-08-04 21:49 ` Yinghai Lu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox