From mboxrd@z Thu Jan 1 00:00:00 1970 From: Juan Quintela Subject: Re: [PATCHv4-repost 2/2] qemu: cleanup unused macros in cirrus Date: Mon, 30 Nov 2009 17:54:34 +0100 Message-ID: References: <20091130144903.GC30802@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Avi Kivity , Anthony Liguori , "qemu-devel\@nongnu.org" , kvm-devel To: "Michael S. Tsirkin" Return-path: Received: from mx1.redhat.com ([209.132.183.28]:2090 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752517AbZK3QzQ (ORCPT ); Mon, 30 Nov 2009 11:55:16 -0500 In-Reply-To: <20091130144903.GC30802@redhat.com> (Michael S. Tsirkin's message of "Mon, 30 Nov 2009 16:49:03 +0200") Sender: kvm-owner@vger.kernel.org List-ID: "Michael S. Tsirkin" wrote: > Cirrus vga has a copy of many PCI macros, > and it doesn't even use them. Clean up. > We also don't need to override header type > as it is NORMAL by default. > > Signed-off-by: Michael S. Tsirkin > --- > hw/cirrus_vga.c | 36 +----------------------------------- > 1 files changed, 1 insertions(+), 35 deletions(-) > > diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c > index 89ffdf9..edf0a8a 100644 > --- a/hw/cirrus_vga.c > +++ b/hw/cirrus_vga.c > @@ -173,40 +173,6 @@ > #define CIRRUS_MMIO_LINEDRAW_MODE 0x39 // byte > #define CIRRUS_MMIO_BLTSTATUS 0x40 // byte > > -// PCI 0x04: command(word), 0x06(word): status > -#define PCI_COMMAND_IOACCESS 0x0001 > -#define PCI_COMMAND_MEMACCESS 0x0002 > -#define PCI_COMMAND_BUSMASTER 0x0004 > -#define PCI_COMMAND_SPECIALCYCLE 0x0008 > -#define PCI_COMMAND_MEMWRITEINVALID 0x0010 > -#define PCI_COMMAND_PALETTESNOOPING 0x0020 > -#define PCI_COMMAND_PARITYDETECTION 0x0040 > -#define PCI_COMMAND_ADDRESSDATASTEPPING 0x0080 > -#define PCI_COMMAND_BACKTOBACKTRANS 0x0200 > -// PCI 0x08, 0xff000000 (0x09-0x0b:class,0x08:rev) > -#define PCI_CLASS_BASE_DISPLAY 0x03 > -// PCI 0x08, 0x00ff0000 > -#define PCI_CLASS_SUB_VGA 0x00 > -// PCI 0x0c, 0x00ff0000 (0x0c:cacheline,0x0d:latency,0x0e:headertype,0x0f:Built-in self test) > -// 0x10-0x3f (headertype 00h) > -// PCI 0x10,0x14,0x18,0x1c,0x20,0x24: base address mapping registers > -// 0x10: MEMBASE, 0x14: IOBASE(hard-coded in XFree86 3.x) > -#define PCI_MAP_MEM 0x0 > -#define PCI_MAP_IO 0x1 > -#define PCI_MAP_MEM_ADDR_MASK (~0xf) > -#define PCI_MAP_IO_ADDR_MASK (~0x3) > -#define PCI_MAP_MEMFLAGS_32BIT 0x0 > -#define PCI_MAP_MEMFLAGS_32BIT_1M 0x1 > -#define PCI_MAP_MEMFLAGS_64BIT 0x4 > -#define PCI_MAP_MEMFLAGS_CACHEABLE 0x8 > -// PCI 0x28: cardbus CIS pointer > -// PCI 0x2c: subsystem vendor id, 0x2e: subsystem id > -// PCI 0x30: expansion ROM base address > -#define PCI_ROMBIOS_ENABLED 0x1 > -// PCI 0x34: 0xffffff00=reserved, 0x000000ff=capabilities pointer > -// PCI 0x38: reserved > -// PCI 0x3c: 0x3c=int-line, 0x3d=int-pin, 0x3e=min-gnt, 0x3f=maax-lat > - > #define CIRRUS_PNPMMIO_SIZE 0x1000 > > #define ABS(a) ((signed)(a) > 0 ? a : -a) > @@ -3249,8 +3215,8 @@ static int pci_cirrus_vga_initfn(PCIDevice *dev) > /* setup PCI */ > pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_CIRRUS); > pci_config_set_device_id(pci_conf, device_id); > + //pci_conf[0x04] = PCI_COMMAND_IOACCESS | PCI_COMMAND_MEMACCESS; You again added this here :) You agreed to remove this line that is a leftover of previous patch. > pci_config_set_class(pci_conf, PCI_CLASS_DISPLAY_VGA); > - pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; > > /* setup memory space */ > /* memory #0 LFB */ for the rest, I agree with both patches. I trust you on pci defaults :) Later, Juan.