Re: [Qemu-devel] [PATCH 5/6] scsi-disk: Remove 'drive_kind'

[Markus Armbruster <armbru@redhat.com>]

Hannes Reinecke <hare@suse.de> writes:

> Instead of using its own definitions scsi-disk should
> be using the device type of the parent device.
>
> Signed-off-by: Hannes Reinecke <hare@suse.de>
> ---
>  hw/scsi-defs.h |    6 +++++-
>  hw/scsi-disk.c |   48 ++++++++++++++++++++++++------------------------
>  2 files changed, 29 insertions(+), 25 deletions(-)
>
> diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
> index f644860..27010b7 100644
> --- a/hw/scsi-defs.h
> +++ b/hw/scsi-defs.h
> @@ -164,6 +164,7 @@
>  
>  #define TYPE_DISK           0x00
>  #define TYPE_TAPE           0x01
> +#define TYPE_PRINTER        0x02
>  #define TYPE_PROCESSOR      0x03    /* HP scanners use this */
>  #define TYPE_WORM           0x04    /* Treated as ROM by our system */
>  #define TYPE_ROM            0x05
> @@ -171,6 +172,9 @@
>  #define TYPE_MOD            0x07    /* Magneto-optical disk -
>  				     * - treated as TYPE_DISK */
>  #define TYPE_MEDIUM_CHANGER 0x08
> -#define TYPE_ENCLOSURE	    0x0d    /* Enclosure Services Device */
> +#define TYPE_STORAGE_ARRAY  0x0c    /* Storage array device */
> +#define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
> +#define TYPE_RBC            0x0e    /* Simplified Direct-Access Device */
> +#define TYPE_OSD            0x11    /* Object-storage Device */
>  #define TYPE_NO_LUN         0x7f
>  
> diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
> index 535fa11..ae2c157 100644
> --- a/hw/scsi-disk.c
> +++ b/hw/scsi-disk.c
> @@ -74,7 +74,6 @@ struct SCSIDiskState
>      char *version;
>      char *serial;
>      SCSISense sense;
> -    SCSIDriveKind drive_kind;
>  };
>  
>  static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
> @@ -382,7 +381,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
>              return -1;
>          }
>  
> -        if (s->drive_kind == SCSI_CD) {
> +        if (s->qdev.type == TYPE_ROM) {
>              outbuf[buflen++] = 5;
>          } else {
>              outbuf[buflen++] = 0;
> @@ -401,7 +400,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
>              if (s->serial)
>                  outbuf[buflen++] = 0x80; // unit serial number
>              outbuf[buflen++] = 0x83; // device identification
> -            if (s->drive_kind == SCSI_HD) {
> +            if (s->qdev.type == TYPE_DISK) {
>                  outbuf[buflen++] = 0xb0; // block limits
>                  outbuf[buflen++] = 0xb2; // thin provisioning
>              }
> @@ -460,7 +459,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
>              unsigned int opt_io_size =
>                      s->qdev.conf.opt_io_size / s->qdev.blocksize;
>  
> -            if (s->drive_kind == SCSI_CD) {
> +            if (s->qdev.type == TYPE_ROM) {
>                  DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
>                          page_code);
>                  return -1;
> @@ -530,12 +529,11 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
>          return buflen;
>      }
>  
> -    if (s->drive_kind == SCSI_CD) {
> -        outbuf[0] = 5;
> +    outbuf[0] = s->qdev.type & 0x1f;
> +    if (s->qdev.type == TYPE_ROM) {
>          outbuf[1] = 0x80;
>          memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
>      } else {
> -        outbuf[0] = 0;
>          outbuf[1] = s->removable ? 0x80 : 0;
>          memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
>      }
> @@ -661,7 +659,7 @@ static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p,
>          return p[1] + 2;
>  
>      case 0x2a: /* CD Capabilities and Mechanical Status page. */
> -        if (s->drive_kind != SCSI_CD)
> +        if (s->qdev.type != TYPE_ROM)
>              return 0;
>          p[0] = 0x2a;
>          p[1] = 0x14;
> @@ -877,7 +875,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
>              goto illegal_request;
>          break;
>      case START_STOP:
> -        if (s->drive_kind == SCSI_CD && (req->cmd.buf[4] & 2)) {
> +        if (s->qdev.type == TYPE_ROM && (req->cmd.buf[4] & 2)) {
>              /* load/eject medium */
>              bdrv_eject(s->bs, !(req->cmd.buf[4] & 1));
>          }
> @@ -1183,7 +1181,7 @@ static void scsi_destroy(SCSIDevice *dev)
>      blockdev_mark_auto_del(s->qdev.conf.bs);
>  }
>  
> -static int scsi_initfn(SCSIDevice *dev, SCSIDriveKind kind)
> +static int scsi_initfn(SCSIDevice *dev, uint8_t scsi_type)
>  {
>      SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
>      DriveInfo *dinfo;
> @@ -1193,9 +1191,8 @@ static int scsi_initfn(SCSIDevice *dev, SCSIDriveKind kind)
>          return -1;
>      }
>      s->bs = s->qdev.conf.bs;
> -    s->drive_kind = kind;
>  
> -    if (kind == SCSI_HD && !bdrv_is_inserted(s->bs)) {
> +    if (scsi_type == TYPE_DISK && !bdrv_is_inserted(s->bs)) {
>          error_report("Device needs media, but drive is empty");
>          return -1;
>      }
> @@ -1217,44 +1214,47 @@ static int scsi_initfn(SCSIDevice *dev, SCSIDriveKind kind)
>          return -1;
>      }
>  
> -    if (kind == SCSI_CD) {
> +    if (scsi_type == TYPE_ROM) {
>          s->qdev.blocksize = 2048;
> -    } else {
> +    } else if (scsi_type == TYPE_DISK) {
>          s->qdev.blocksize = s->qdev.conf.logical_block_size;
> +    } else {
> +        error_report("scsi-disk: Unhandled SCSI type %02x", scsi_type);
> +        return -1;
>      }
>      s->cluster_size = s->qdev.blocksize / 512;
>      s->bs->buffer_alignment = s->qdev.blocksize;
>  
> -    s->qdev.type = TYPE_DISK;
> +    s->qdev.type = scsi_type;

Is this a bug fix?

>      qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
> -    bdrv_set_removable(s->bs, kind == SCSI_CD);
> +    bdrv_set_removable(s->bs, scsi_type == TYPE_ROM);
>      add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
>      return 0;
>  }
>  
>  static int scsi_hd_initfn(SCSIDevice *dev)
>  {
> -    return scsi_initfn(dev, SCSI_HD);
> +    return scsi_initfn(dev, TYPE_DISK);
>  }
>  
>  static int scsi_cd_initfn(SCSIDevice *dev)
>  {
> -    return scsi_initfn(dev, SCSI_CD);
> +    return scsi_initfn(dev, TYPE_ROM);
>  }
>  
>  static int scsi_disk_initfn(SCSIDevice *dev)
>  {
> -    SCSIDriveKind kind;
>      DriveInfo *dinfo;
> +    uint8_t scsi_type = TYPE_DISK;
>  
> -    if (!dev->conf.bs) {
> -        kind = SCSI_HD;         /* will die in scsi_initfn() */

The comment explains why we don't explicitly fail when !dev->conf.bs,
like all the other block device models.  I'd rather keep it.

> -    } else {
> +    if (dev->conf.bs) {
>          dinfo = drive_get_by_blockdev(dev->conf.bs);
> -        kind = dinfo->media_cd ? SCSI_CD : SCSI_HD;
> +        if (dinfo->media_cd) {
> +            scsi_type = TYPE_ROM;
> +        }
>      }
>  
> -    return scsi_initfn(dev, kind);
> +    return scsi_initfn(dev, scsi_type);
>  }
>  
>  #define DEFINE_SCSI_DISK_PROPERTIES()                           \