From: sashiko-bot@kernel.org
To: "Yosry Ahmed" <yosry@kernel.org>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH v2 10/29] KVM: SVM: Use a static ASID per vCPU
Date: Thu, 08 Oct 2026 00:30:26 +0000 [thread overview]
Message-ID: <sashiko-outbox-163471@kernel.org> (raw)
In-Reply-To: <20261008001425.2458927-11-yosry@kernel.org>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Critical] kvm: SEV VM intra-host migration leaves source vCPUs with the migrated SEV ASID, enabling cross-VM encryption context sharing
--
commit f1bcd0115d8d6ff1f7f41fcb1c4ff86d4d68a34e
Author: Yosry Ahmed <yosry@kernel.org>
KVM: SVM: Use a static ASID per vCPU
This commit switches KVM from dynamic ASID allocation to a static per-vCPU
ASID scheme on SVM. It removes the generation-based wraparound tracking,
instead tracking pending flushes in the VMCB and reusing the same ASID
across physical CPUs.
> diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
> index 0c3befd9bc850..8f27722bc4faf 100644
> --- a/arch/x86/kvm/svm/svm.c
> +++ b/arch/x86/kvm/svm/svm.c
[ ... ]
> @@ -3875,37 +3868,24 @@ static int pre_svm_run(struct kvm_vcpu *vcpu)
> {
[ ... ]
> if (is_sev_guest(vcpu))
> return pre_sev_run(svm, vcpu->cpu);
>
> - /* FIXME: handle wraparound of asid_generation */
> - if (svm->current_vmcb->asid_generation != sd->asid_generation)
> - new_asid(svm, sd);
> + if (unlikely(svm->vmcb->control.asid == fallback_asid))
> + vmcb_set_flush_asid(svm->vmcb);
>
> return 0;
> }
[Severity: Critical]
With the removal of dynamic ASID reallocation in pre_svm_run(), can a source
vCPU permanently retain its migrated SEV ASID after a
KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM migration?
During a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM migration,
sev_vm_move_enc_context_from() transfers the SEV ASID to the destination VM
and marks the source VM as non-SEV. However, it intentionally skips the
source vCPUs for vanilla SEV VMs:
arch/x86/kvm/svm/sev.c:sev_vm_move_enc_context_from() {
...
if (!dst->es_active)
continue;
src_vcpu = kvm_get_vcpu(src_kvm, i);
src_svm = to_svm(src_vcpu);
...
}
As a result, the source vCPUs retain the transferred SEV ASID (svm->asid)
and the SVM_MISC_ENABLE_SEV bit in their VMCBs.
Previously, because the source VM was no longer considered an SEV guest,
is_sev_guest() would return false, and the dynamic ASID allocation logic in
pre_svm_run() would force the source vCPU to acquire a new, non-SEV ASID
before running.
Now that the dynamic allocation logic is removed, the source vCPU will
permanently retain the migrated SEV ASID.
If a malicious userspace hypervisor executes KVM_RUN on these zombie source
vCPUs, KVM will treat the VM as non-SEV, allowing the hypervisor to bypass
software protections and map its own nested page tables.
Because the VMCB still has the SEV ASID and SEV=1, the hardware will decrypt
the destination VM's memory using the destination's key. Does this break
SEV confidentiality and memory isolation by allowing cross-VM encryption
context sharing?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261008001425.2458927-1-yosry@kernel.org?part=10
next prev parent reply other threads:[~2026-10-08 0:30 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-08 0:13 [PATCH v2 00/29] KVM: nSVM: Optimize nSVM TLB flushes Yosry Ahmed
2026-10-08 0:13 ` [PATCH v2 01/29] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-10-08 0:13 ` [PATCH v2 02/29] KVM: SVM: Document number of ASIDs CPUID setting Yosry Ahmed
2026-10-08 0:13 ` [PATCH v2 03/29] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-10-08 0:30 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 04/29] KVM: x86/mmu: Support specifying reserved TLB tags Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 05/29] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 06/29] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 07/29] KVM: SEV: Do ASID initialization at VMCB initialization Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 08/29] KVM: SEV: Expose sev_get_asid() outside of sev.c Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 09/29] KVM: SEV: Explicitly initialize the per vCPU ASID on SEV VM migration Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 10/29] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-10-08 0:30 ` sashiko-bot [this message]
2026-10-08 0:14 ` [PATCH v2 11/29] KVM: SVM: Only flush the fallback ASID when used by a different vCPU Yosry Ahmed
2026-10-08 0:33 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 12/29] KVM: nSVM: Drop svm->nested.initialized Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 13/29] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-10-08 0:42 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 14/29] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 15/29] KVM: x86: hyper-v: Allow purging all TLB flush FIFOs Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 16/29] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 17/29] KVM: nSVM: Always switch VMCB before leaving guest mode Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 18/29] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 19/29] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 20/29] KVM: x86: Add KVM_REQ_MMU_SYNC_ALL_ROOTS Yosry Ahmed
2026-10-08 3:29 ` Lai Jiangshan
2026-10-08 0:14 ` [PATCH v2 21/29] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-10-08 0:36 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 22/29] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 23/29] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 24/29] KVM: x86/mmu: Rename __kvm_mmu_invalidate_addr() to kvm_mmu_sync_addr() Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 25/29] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the GVA flush Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 26/29] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-10-08 0:45 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 27/29] KVM: nSVM: Flush the ASID on nested transitions if shared by L1 and L2 Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 28/29] KVM: nSVM: Use different ASIDs for " Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 29/29] KVM: selftests: Add a test for nested TLB flushes Yosry Ahmed
2026-10-08 0:35 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-163471@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=yosry@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox