From: sashiko-bot@kernel.org
To: "Sascha Bischoff" <sascha.bischoff@arm.com>,
kvmarm@lists.linux.dev, kvm@vger.kernel.org
Cc: "Oliver Upton" <oupton@kernel.org>, "Marc Zyngier" <maz@kernel.org>
Subject: Re: [PATCH 07/16] KVM: arm64: gic-v5: Add ITS guest table translation emulation
Date: Fri, 16 Oct 2026 16:17:17 +0000 [thread overview]
Message-ID: <sashiko-outbox-174621@kernel.org> (raw)
In-Reply-To: <20261016155741.979985-8-sascha.bischoff@arm.com>
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] kvm: typed INTID used directly as XArray index in vgic_add_lpi()
- [Medium] kvm: arm64: gic-v5: Guest can bypass VITS_V5_DEVICE_ID_BITS policy cap
- [Low] kvm: compilation failure due to mismatched types in min() macro
--
commit c4304c740198b40a23d386e3b547cd38e75a6238
Author: Sascha Bischoff <sascha.bischoff@arm.com>
KVM: arm64: gic-v5: Add ITS guest table translation emulation
The GICv5 ITS consumes guest-owned translation tables. Unlike the
GICv3 ITS, KVM does not maintain a separate software device/table
model for GICv5 translations; the guest's DT and ITTs are the
authoritative source of DeviceID/EventID to LPI mappings.
> diff --git a/arch/arm64/kvm/vgic/vgic-its-v5.c b/arch/arm64/kvm/vgic/vgic-its-v5.c
> --- a/arch/arm64/kvm/vgic/vgic-its-v5.c
> +++ b/arch/arm64/kvm/vgic/vgic-its-v5.c
[ ... ]
> +static int get_itt(struct kvm *kvm, struct vgic_v5_its *its, u32 device_id,
> + gpa_t *itt_base, bool *two_level_itt,
> + unsigned int *event_id_bits, unsigned int *itt_l2sz)
> +{
> + unsigned int dt_l2sz, device_id_bits;
> + bool two_level_dt;
> + gpa_t dt_base;
> +
> + dt_base = its->dt_baser.addr;
> + two_level_dt = its->dt_cfgr.structure;
> + dt_l2sz = its->dt_cfgr.l2sz;
> + device_id_bits = its->dt_cfgr.device_id_bits;
> +
> + if (device_id >= 1UL << device_id_bits) {
[Severity: Medium]
Does this check allow the guest to bypass the VITS_V5_DEVICE_ID_BITS policy
cap?
KVM advertises a maximum of 16 device ID bits (VITS_V5_DEVICE_ID_BITS) and a
single-level DT in IDR1. However, when the guest writes to GICV5_ITS_DT_CFGR,
the fields are stored directly in its->dt_cfgr without being clamped to
these policy limits.
Since this out-of-bounds check compares against the un-clamped guest value
instead of the VITS_V5_DEVICE_ID_BITS cap, the guest could configure a
2-level DT and process Device IDs up to 31 bits, bypassing the advertised
policy cap.
> + kvm_debug("Device ID out of range\n");
> + return -E2BIG;
> + }
[ ... ]
> +static int parse_two_level_itt(struct kvm *kvm, u32 event_id, gpa_t itt_base,
> + unsigned int itt_l2sz, __le64 *itt_l2_entry)
> +{
[ ... ]
> + itt_l2_base = FIELD_GET(GICV5_ITTL1E_L2_ADDR_MASK, val) << 3;
> + l2_event_id_bits =
> + min(FIELD_GET(GICV5_ITTL1E_SPAN, val), itt_split_bits);
[Severity: Low]
Will this min() macro invocation cause a compilation failure due to mismatched
types?
The arguments to min() are FIELD_GET(GICV5_ITTL1E_SPAN, val) and
itt_split_bits. val is a 64-bit u64, making the FIELD_GET evaluation an
unsigned long long, while itt_split_bits is a 32-bit unsigned int.
The Linux kernel's min() macro enforces strict type equality and will cause
a build failure when comparing a 64-bit and 32-bit type. Could we use min_t()
here instead to resolve the mismatch?
> + l2_event_id = event_id % (1UL << l2_event_id_bits);
[ ... ]
> +static int __vgic_v5_its_resolve_lpi(struct kvm *kvm, struct vgic_v5_its *its,
> + u32 device_id, u16 event_id,
> + struct vgic_irq **irq)
> +{
[ ... ]
> + val = le64_to_cpu(itt_l2_entry);
> + if (!FIELD_GET(GICV5_ITTL2E_VALID, val)) {
> + kvm_debug("ITTE is not valid\n");
> + return -EINVAL;
> + }
> +
> + lpi = FIELD_GET(GICV5_ITTL2E_LPI_ID, val);
> +
> + *irq = vgic_add_lpi(kvm, vgic_v5_make_lpi(lpi), NULL);
[Severity: High]
Does this pass a fully typed INTID directly to vgic_add_lpi()?
Here, the hardware LPI ID is extracted and converted to a full typed INTID
using vgic_v5_make_lpi(), which sets the GICv5 type bits in the upper nibble.
This typed INTID is passed to vgic_add_lpi(), which then uses it directly
as the array index for the lpi_xa XArray:
arch/arm64/kvm/vgic/vgic.c:vgic_add_lpi() {
...
ret = xa_reserve_irq(&dist->lpi_xa, intid, GFP_KERNEL_ACCOUNT);
...
}
Using a typed INTID as an array index violates the GICv5 architectural rule
to strip type bits before indexing. It forces the XArray to allocate
unnecessary depth to reach indices over 1 billion, leading to memory waste
and incorrect type dispatch separation.
> + if (IS_ERR(*irq))
> + return PTR_ERR(*irq);
> +
> + return 0;
> +}
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261016155741.979985-1-sascha.bischoff@arm.com?part=7
next prev parent reply other threads:[~2026-10-16 16:17 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 15:57 [PATCH 00/16] KVM: arm64: Add GICv5 ITS support Sascha Bischoff
2026-10-16 15:57 ` [PATCH 01/16] KVM: arm64: vgic: Split out common LPI allocation Sascha Bischoff
2026-10-16 16:14 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 02/16] KVM: arm64: vgic: Pass opaque device pointer to ITS MMIO callbacks Sascha Bischoff
2026-10-16 15:57 ` [PATCH 03/16] KVM: arm64: gic-v5: Share CoreSight ID register emulation Sascha Bischoff
2026-10-16 15:57 ` [PATCH 04/16] irqchip/gic-v5: Add ITS MMIO register definitions Sascha Bischoff
2026-10-16 15:57 ` [PATCH 05/16] KVM: arm64: gic-v5: Add ITS device skeleton Sascha Bischoff
2026-10-16 15:57 ` [PATCH 06/16] KVM: arm64: gic-v5: Add ITS MMIO state emulation Sascha Bischoff
2026-10-16 16:11 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 07/16] KVM: arm64: gic-v5: Add ITS guest table translation emulation Sascha Bischoff
2026-10-16 16:17 ` sashiko-bot [this message]
2026-10-16 15:57 ` [PATCH 08/16] KVM: arm64: gic-v5: Add ITS translation cache maintenance Sascha Bischoff
2026-10-16 16:10 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 09/16] KVM: arm64: gic-v5: Add ITS MSI injection Sascha Bischoff
2026-10-16 16:23 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 10/16] KVM: arm64: gic-v5: Add ITS userspace register access Sascha Bischoff
2026-10-16 16:19 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 11/16] irqchip/gic-v5: Enable direct injection in ITS Sascha Bischoff
2026-10-16 16:22 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 12/16] KVM: arm64: vgic: Move direct MSI support helper to common MMIO code Sascha Bischoff
2026-10-16 15:57 ` [PATCH 13/16] KVM: arm64: gic-v5: Implement irq forwarding Sascha Bischoff
2026-10-16 16:25 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 14/16] KVM: selftests: Add VGICv5 ITS attribute tests Sascha Bischoff
2026-10-16 16:18 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 15/16] KVM: selftests: Add VGICv5 ITS translation cache tests Sascha Bischoff
2026-10-16 16:22 ` sashiko-bot
2026-10-16 15:57 ` [PATCH 16/16] KVM: arm64: gic-v5: Document ITS userspace ABI Sascha Bischoff
2026-10-16 16:27 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-174621@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=sascha.bischoff@arm.com \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox