From: sashiko-bot@kernel.org
To: "Fuad Tabba" <fuad.tabba@linux.dev>, kvmarm@lists.linux.dev
Cc: kvm@vger.kernel.org, "Oliver Upton" <oupton@kernel.org>,
"Marc Zyngier" <maz@kernel.org>
Subject: Re: [PATCH 04/16] KVM: arm64: Advertise ID_AA64ZFR0_EL1 to protected VMs
Date: Mon, 09 Nov 2026 08:48:07 +0000 [thread overview]
Message-ID: <sashiko-outbox-204612@kernel.org> (raw)
In-Reply-To: <20261109083205.806619-5-fuad.tabba@linux.dev>
Thank you for your contribution! Sashiko AI review found no new issues
in this patch, but noticed 1 related pre-existing issue it does not
introduce:
- [High] KVM: arm64: GPA and GPI exposed without vm_has_ptrauth() in
pvmid_aa64isar1 [1]
--
commit 2d2ae4f2681e16f1e4bc8fc816b7e7d62dcaf9be
Author: Fuad Tabba <fuad.tabba@linux.dev>
KVM: arm64: Advertise ID_AA64ZFR0_EL1 to protected VMs
This commit copies the host's sanitised ID_AA64ZFR0_EL1 register value to
EL2 and exposes its capped feature fields to protected VMs when SVE is
enabled for the guest.
> diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
> index 7a0aed1d8b0b3..8456bb44edd52 100644
> --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c
> +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
[ ... ]
> @@ -124,6 +125,22 @@ static const struct pvm_ftr_bits pvmid_aa64pfr2[] = {
> FEAT_END
> };
>
> +static const struct pvm_ftr_bits pvmid_aa64zfr0[] = {
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, SVEver, SVE2p3, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, AES, AES2, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, EltPerm, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, BitPerm, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, BF16, EBF16, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, B16B16, B16MM, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, SHA3, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, SM4, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, I8MM, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, F16MM, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, F32MM, IMP, vm_has_sve),
> + MAX_FEAT_FUNC(ID_AA64ZFR0_EL1, F64MM, IMP, vm_has_sve),
> + FEAT_END
> +};
> +
> static const struct pvm_ftr_bits pvmid_aa64mmfr0[] = {
> MAX_FEAT_ENUM(ID_AA64MMFR0_EL1, PARANGE, 40),
> MAX_FEAT_ENUM(ID_AA64MMFR0_EL1, ASIDBITS, 16),
[Severity: High]
This problem wasn't introduced by this patch, but should GPA and GPI in
pvmid_aa64isar1[] also be gated on vm_has_ptrauth() [1]?
arch/arm64/kvm/hyp/nvhe/sys_regs.c:pvmid_aa64isar1[] {
MAX_FEAT(ID_AA64ISAR1_EL1, DPB, DPB2),
MAX_FEAT_FUNC(ID_AA64ISAR1_EL1, APA, PAuth, vm_has_ptrauth),
MAX_FEAT_FUNC(ID_AA64ISAR1_EL1, API, PAuth, vm_has_ptrauth),
...
MAX_FEAT(ID_AA64ISAR1_EL1, GPA, IMP),
MAX_FEAT(ID_AA64ISAR1_EL1, GPI, IMP),
...
}
Unlike APA, API, GPA3 and APA3, the GPA and GPI entries use MAX_FEAT()
instead of MAX_FEAT_FUNC(..., vm_has_ptrauth). On a host with generic
pointer authentication, a protected VM created without pointer
authentication still sees GPA or GPI advertised in ID_AA64ISAR1_EL1 while
HCR_EL2.API and HCR_EL2.APK remain clear, so guest generic PAuth
instructions or key accesses trap to EL2 and inject an UNDEFINED exception
into the guest.
[1] https://sashiko.dev/#/bug/linux-01433c94-7171-4ed8-85e1-6ba36cf8dd5f
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261109083205.806619-1-fuad.tabba@linux.dev?part=4
next prev parent reply other threads:[~2026-11-09 8:48 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 8:31 [PATCH 00/16] KVM: arm64: Support debug, SVE, MOPS, PIE/POE, FPMR and more in protected VMs Fuad Tabba
2026-11-09 8:31 ` [PATCH 01/16] KVM: arm64: Add support for self-hosted debug in protected guests Fuad Tabba
2026-11-09 8:31 ` [PATCH 02/16] KVM: arm64: Remove redundant kern_hyp_va() calls from the pKVM FP sync Fuad Tabba
2026-11-09 8:31 ` [PATCH 03/16] KVM: arm64: Allocate a protected vCPU's SVE state at EL2 Fuad Tabba
2026-11-09 8:31 ` [PATCH 04/16] KVM: arm64: Advertise ID_AA64ZFR0_EL1 to protected VMs Fuad Tabba
2026-11-09 8:48 ` sashiko-bot [this message]
2026-11-09 8:50 ` Fuad Tabba
2026-11-09 8:31 ` [PATCH 05/16] KVM: arm64: Allow protected VMs to use SVE Fuad Tabba
2026-11-09 8:31 ` [PATCH 06/16] KVM: arm64: Move the VM's FGU initialisation into config.c Fuad Tabba
2026-11-09 8:31 ` [PATCH 07/16] KVM: arm64: Compute a protected vCPU's fine-grained traps at EL2 Fuad Tabba
2026-11-09 8:31 ` [PATCH 08/16] KVM: arm64: Advertise TCR2, SCTLR2, S1PIE and S1POE to protected VMs Fuad Tabba
2026-11-09 8:31 ` [PATCH 09/16] KVM: arm64: Advertise MOPS " Fuad Tabba
2026-11-09 8:31 ` [PATCH 10/16] KVM: arm64: Advertise FPMR " Fuad Tabba
2026-11-09 8:32 ` [PATCH 11/16] KVM: arm64: Advertise HBC, CLRBHB, RPRFM, CSSC and LUT " Fuad Tabba
2026-11-09 8:32 ` [PATCH 12/16] KVM: arm64: Advertise FAMINMAX, LSFE, LSUI and FPRCVT " Fuad Tabba
2026-11-09 8:32 ` [PATCH 13/16] KVM: arm64: Advertise AFP and RPRES " Fuad Tabba
2026-11-09 8:32 ` [PATCH 14/16] KVM: arm64: Advertise ECBHB, TIDCP1, TTST and LVA " Fuad Tabba
2026-11-09 8:32 ` [PATCH 15/16] KVM: arm64: Advertise FP8 and F16MM " Fuad Tabba
2026-11-09 8:32 ` [PATCH 16/16] KVM: arm64: Advertise ECV, HAFT and ETS3 " Fuad Tabba
2026-11-09 20:20 ` [PATCH 00/16] KVM: arm64: Support debug, SVE, MOPS, PIE/POE, FPMR and more in " Oliver Upton
2026-11-10 7:53 ` Fuad Tabba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-204612@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=fuad.tabba@linux.dev \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox