From: Christoffer Dall <cdall@linaro.org>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>,
kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PULL 25/37] KVM: arm64: vgic-its: Fix pending table sync
Date: Tue, 9 May 2017 12:44:54 +0200 [thread overview]
Message-ID: <20170509104506.30929-26-cdall@linaro.org> (raw)
In-Reply-To: <20170509104506.30929-1-cdall@linaro.org>
From: Eric Auger <eric.auger@redhat.com>
In its_sync_lpi_pending_table() we currently ignore the
target_vcpu of the LPIs. We sync the pending bit found in
the vcpu pending table even if the LPI is not targeting it.
Also in vgic_its_cmd_handle_invall() we are supposed to
read the config table data for the LPIs associated to the
collection ID. At the moment we refresh all LPI config
information.
This patch passes a vpcu to vgic_copy_lpi_list() so that
this latter returns a snapshot of the LPIs targeting this
CPU and only those.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
virt/kvm/arm/vgic/vgic-its.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index adb3d9e..9f7105c 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -301,13 +301,13 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
}
/*
- * Create a snapshot of the current LPI list, so that we can enumerate all
- * LPIs without holding any lock.
- * Returns the array length and puts the kmalloc'ed array into intid_ptr.
+ * Create a snapshot of the current LPIs targeting @vcpu, so that we can
+ * enumerate those LPIs without holding any lock.
+ * Returns their number and puts the kmalloc'ed array into intid_ptr.
*/
-static int vgic_copy_lpi_list(struct kvm *kvm, u32 **intid_ptr)
+static int vgic_copy_lpi_list(struct kvm_vcpu *vcpu, u32 **intid_ptr)
{
- struct vgic_dist *dist = &kvm->arch.vgic;
+ struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
struct vgic_irq *irq;
u32 *intids;
int irq_count = dist->lpi_list_count, i = 0;
@@ -326,14 +326,14 @@ static int vgic_copy_lpi_list(struct kvm *kvm, u32 **intid_ptr)
spin_lock(&dist->lpi_list_lock);
list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
/* We don't need to "get" the IRQ, as we hold the list lock. */
- intids[i] = irq->intid;
- if (++i == irq_count)
- break;
+ if (irq->target_vcpu != vcpu)
+ continue;
+ intids[i++] = irq->intid;
}
spin_unlock(&dist->lpi_list_lock);
*intid_ptr = intids;
- return irq_count;
+ return i;
}
/*
@@ -382,7 +382,7 @@ static u32 max_lpis_propbaser(u64 propbaser)
}
/*
- * Scan the whole LPI pending table and sync the pending bit in there
+ * Sync the pending table pending bit of LPIs targeting @vcpu
* with our own data structures. This relies on the LPI being
* mapped before.
*/
@@ -395,7 +395,7 @@ static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
u32 *intids;
int nr_irqs, i;
- nr_irqs = vgic_copy_lpi_list(vcpu->kvm, &intids);
+ nr_irqs = vgic_copy_lpi_list(vcpu, &intids);
if (nr_irqs < 0)
return nr_irqs;
@@ -1081,7 +1081,7 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its,
vcpu = kvm_get_vcpu(kvm, collection->target_addr);
- irq_count = vgic_copy_lpi_list(kvm, &intids);
+ irq_count = vgic_copy_lpi_list(vcpu, &intids);
if (irq_count < 0)
return irq_count;
--
2.9.0
next prev parent reply other threads:[~2017-05-09 10:42 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-09 10:44 [PULL 00/37] KVM/ARM Changes for v4.12 - Round 2 Christoffer Dall
2017-05-09 10:44 ` [PULL 01/37] arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses Christoffer Dall
2017-05-09 10:44 ` [PULL 02/37] KVM: arm/arm64: Move shared files to virt/kvm/arm Christoffer Dall
2017-05-09 10:44 ` [PULL 03/37] KVM: arm/arm64: Add ITS save/restore API documentation Christoffer Dall
2017-05-09 10:44 ` [PULL 04/37] KVM: arm/arm64: Add GICV3 pending table save " Christoffer Dall
2017-05-09 10:44 ` [PULL 05/37] KVM: arm/arm64: vgic-its: rename itte into ite Christoffer Dall
2017-05-09 10:44 ` [PULL 06/37] arm/arm64: vgic: turn vgic_find_mmio_region into public Christoffer Dall
2017-05-09 10:44 ` [PULL 07/37] KVM: arm64: vgic-its: KVM_DEV_ARM_VGIC_GRP_ITS_REGS group Christoffer Dall
2017-05-09 10:44 ` [PULL 08/37] KVM: arm/arm64: vgic: expose (un)lock_all_vcpus Christoffer Dall
2017-05-09 10:44 ` [PULL 09/37] KVM: arm64: vgic-its: Implement vgic_its_has_attr_regs and attr_regs_access Christoffer Dall
2017-05-09 10:44 ` [PULL 10/37] KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_creadr Christoffer Dall
2017-05-09 10:44 ` [PULL 11/37] KVM: arm64: vgic-its: Introduce migration ABI infrastructure Christoffer Dall
2017-05-09 10:44 ` [PULL 12/37] KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_iidr Christoffer Dall
2017-05-09 10:44 ` [PULL 13/37] KVM: arm64: vgic-its: Interpret MAPD Size field and check related errors Christoffer Dall
2017-05-09 10:44 ` [PULL 14/37] KVM: arm64: vgic-its: Interpret MAPD ITT_addr field Christoffer Dall
2017-05-09 10:44 ` [PULL 15/37] KVM: arm64: vgic-its: Check the device id matches TYPER DEVBITS range Christoffer Dall
2017-05-09 10:44 ` [PULL 16/37] KVM: arm64: vgic-v3: vgic_v3_lpi_sync_pending_status Christoffer Dall
2017-05-09 10:44 ` [PULL 17/37] KVM: arm64: vgic-its: Read config and pending bit in add_lpi() Christoffer Dall
2017-05-09 10:44 ` [PULL 18/37] KVM: arm64: vgic-its: KVM_DEV_ARM_ITS_SAVE/RESTORE_TABLES Christoffer Dall
2017-05-09 10:44 ` [PULL 19/37] KVM: arm64: vgic-its: vgic_its_alloc_ite/device Christoffer Dall
2017-05-09 10:44 ` [PULL 20/37] KVM: arm64: vgic-its: Add infrastructure for table lookup Christoffer Dall
2017-05-09 10:44 ` [PULL 21/37] KVM: arm64: vgic-its: Collection table save/restore Christoffer Dall
2017-05-09 10:44 ` [PULL 22/37] KVM: arm64: vgic-its: vgic_its_check_id returns the entry's GPA Christoffer Dall
2017-05-09 10:44 ` [PULL 23/37] KVM: arm64: vgic-its: Device table save/restore Christoffer Dall
2017-05-09 10:44 ` [PULL 24/37] KVM: arm64: vgic-its: ITT save and restore Christoffer Dall
2017-05-09 10:44 ` Christoffer Dall [this message]
2017-05-09 10:44 ` [PULL 26/37] KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES Christoffer Dall
2017-05-09 10:44 ` [PULL 27/37] KVM: arm/arm64: Clarification and relaxation to ITS save/restore ABI Christoffer Dall
2017-05-09 10:44 ` [PULL 28/37] KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enable Christoffer Dall
2017-05-09 10:44 ` [PULL 29/37] KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus Christoffer Dall
2017-05-09 10:44 ` [PULL 30/37] KVM: arm/arm64: Refactor vgic_register_redist_iodevs Christoffer Dall
2017-05-09 10:45 ` [PULL 31/37] KVM: arm/arm64: Make vgic_v3_check_base more broadly usable Christoffer Dall
2017-05-09 10:45 ` [PULL 32/37] KVM: arm/arm64: Slightly rework kvm_vgic_addr Christoffer Dall
2017-05-09 10:45 ` [PULL 33/37] KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs Christoffer Dall
2017-05-09 10:45 ` [PULL 34/37] KVM: arm/arm64: Get rid of its->initialized field Christoffer Dall
2017-05-09 10:45 ` [PULL 35/37] KVM: arm/arm64: Register ITS iodev when setting base address Christoffer Dall
2017-05-09 10:45 ` [PULL 36/37] KVM: arm/arm64: Don't call map_resources when restoring ITS tables Christoffer Dall
2017-05-09 10:45 ` [PULL 37/37] KVM: arm/arm64: vgic-its: Cleanup after failed ITT restore Christoffer Dall
2017-05-09 10:52 ` [PULL 00/37] KVM/ARM Changes for v4.12 - Round 2 Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170509104506.30929-26-cdall@linaro.org \
--to=cdall@linaro.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox