From: Christoffer Dall <cdall@linaro.org>
To: kvmarm@lists.cs.columbia.edu, Eric Auger <eric.auger@redhat.com>,
Marc Zyngier <marc.zyngier@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>,
kvm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Christoffer Dall <cdall@linaro.org>
Subject: [PATCH v3 5/5] KVM: arm/arm64: Provide a vgic interrupt line level sample function
Date: Wed, 6 Sep 2017 14:26:12 +0200 [thread overview]
Message-ID: <20170906122612.18050-6-cdall@linaro.org> (raw)
In-Reply-To: <20170906122612.18050-1-cdall@linaro.org>
The GIC sometimes need to sample the physical line of a mapped
interrupt. As we know this to be notoriously slow, provide a callback
function for devices (such as the timer) which can do this much faster
than talking to the distributor, for example by comparing a few
in-memory values. Fall back to the good old method of poking the
physical GIC if no callback is provided.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/kvm/arm_vgic.h | 13 ++++++++++++-
virt/kvm/arm/arch_timer.c | 16 +++++++++++++++-
virt/kvm/arm/vgic/vgic.c | 12 +++++++++---
3 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 53f631b..7f76c9e 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -125,6 +125,17 @@ struct vgic_irq {
u8 priority;
enum vgic_irq_config config; /* Level or edge */
+ /*
+ * Callback function pointer to in-kernel devices that can tell us the
+ * state of the input level of mapped level-triggered IRQ faster than
+ * peaking into the physical GIC.
+ *
+ * Always called in non-preemptible section and the functions can use
+ * kvm_arm_get_running_vcpu() to get the vcpu pointer for private
+ * IRQs.
+ */
+ bool (*get_input_level)(int vintid);
+
void *owner; /* Opaque pointer to reserve an interrupt
for in-kernel devices. */
};
@@ -309,7 +320,7 @@ void kvm_vgic_init_cpu_hardware(void);
int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
bool level, void *owner);
int kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, unsigned int host_irq,
- u32 vintid);
+ u32 vintid, bool (*get_input_level)(int vindid));
int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, unsigned int vintid);
bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int vintid);
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index c4fa675..5cb96ca 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -645,6 +645,19 @@ static bool timer_irqs_are_valid(struct kvm_vcpu *vcpu)
return true;
}
+static bool timer_get_input_level(int vintid)
+{
+ struct kvm_vcpu *vcpu = kvm_arm_get_running_vcpu();
+ struct arch_timer_context *timer;
+
+ if (vintid == vcpu_vtimer(vcpu)->irq.irq)
+ timer = vcpu_vtimer(vcpu);
+ else
+ BUG(); /* We only map the vtimer so far */
+
+ return kvm_timer_should_fire(timer);
+}
+
int kvm_timer_enable(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
@@ -666,7 +679,8 @@ int kvm_timer_enable(struct kvm_vcpu *vcpu)
return -EINVAL;
}
- ret = kvm_vgic_map_phys_irq(vcpu, host_vtimer_irq, vtimer->irq.irq);
+ ret = kvm_vgic_map_phys_irq(vcpu, host_vtimer_irq, vtimer->irq.irq,
+ timer_get_input_level);
if (ret)
return ret;
diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
index 7aec730..0ca2b3d 100644
--- a/virt/kvm/arm/vgic/vgic.c
+++ b/virt/kvm/arm/vgic/vgic.c
@@ -154,6 +154,9 @@ bool vgic_get_phys_line_level(struct vgic_irq *irq)
BUG_ON(!irq->hw);
+ if (irq->get_input_level)
+ return irq->get_input_level(irq->intid);
+
WARN_ON(irq_get_irqchip_state(irq->host_irq,
IRQCHIP_STATE_PENDING,
&line_level));
@@ -437,7 +440,8 @@ int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
/* @irq->irq_lock must be held */
static int kvm_vgic_map_irq(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
- unsigned int host_irq)
+ unsigned int host_irq,
+ bool (*get_input_level)(int vindid))
{
struct irq_desc *desc;
struct irq_data *data;
@@ -457,6 +461,7 @@ static int kvm_vgic_map_irq(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
irq->hw = true;
irq->host_irq = host_irq;
irq->hwintid = data->hwirq;
+ irq->get_input_level = get_input_level;
return 0;
}
@@ -465,10 +470,11 @@ static inline void kvm_vgic_unmap_irq(struct vgic_irq *irq)
{
irq->hw = false;
irq->hwintid = 0;
+ irq->get_input_level = NULL;
}
int kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, unsigned int host_irq,
- u32 vintid)
+ u32 vintid, bool (*get_input_level)(int vindid))
{
struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, vintid);
int ret;
@@ -476,7 +482,7 @@ int kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, unsigned int host_irq,
BUG_ON(!irq);
spin_lock(&irq->irq_lock);
- ret = kvm_vgic_map_irq(vcpu, irq, host_irq);
+ ret = kvm_vgic_map_irq(vcpu, irq, host_irq, get_input_level);
spin_unlock(&irq->irq_lock);
vgic_put_irq(vcpu->kvm, irq);
--
2.9.0
prev parent reply other threads:[~2017-09-06 12:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-06 12:26 [PATCH v3 0/5] Handle forwarded level-triggered interrupts Christoffer Dall
2017-09-06 12:26 ` [PATCH v3 1/5] KVM: arm/arm64: Don't cache the timer IRQ level Christoffer Dall
2017-09-06 12:26 ` [PATCH v3 2/5] KVM: arm/arm64: vgic: restructure kvm_vgic_(un)map_phys_irq Christoffer Dall
2017-09-06 12:26 ` [PATCH v3 3/5] KVM: arm/arm64: vgic: Support level-triggered mapped interrupts Christoffer Dall
2017-09-06 12:26 ` [PATCH v3 4/5] KVM: arm/arm64: Support VGIC dist pend/active changes for mapped IRQs Christoffer Dall
2017-09-08 13:04 ` Auger Eric
2017-09-08 13:32 ` Marc Zyngier
2017-09-08 14:27 ` Auger Eric
2017-09-08 16:05 ` Christoffer Dall
2017-09-08 16:30 ` Marc Zyngier
2017-09-06 12:26 ` Christoffer Dall [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170906122612.18050-6-cdall@linaro.org \
--to=cdall@linaro.org \
--cc=andre.przywara@arm.com \
--cc=eric.auger@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox