Linux KVM/arm64 development list
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
	kvmarm@lists.cs.columbia.edu
Cc: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>
Subject: [PATCH v2 14/19] KVM: arm/arm64: Move HYP IO VAs to the "idmap" range
Date: Mon, 11 Dec 2017 14:49:32 +0000	[thread overview]
Message-ID: <20171211144937.4537-15-marc.zyngier@arm.com> (raw)
In-Reply-To: <20171211144937.4537-1-marc.zyngier@arm.com>

We so far mapped our HYP IO (which is essencially the GICv2 control
registers) using the same method as for memory. It recently appeared
that is a bit unsafe:

we compute the HYP VA using the kern_hyp_va helper, but that helper
is only designed to deal with kernel VAs coming from the linear map,
and not from the vmalloc region... This could in turn cause some bad
aliasing between the two, amplified by the new VA randomisation.

A solution is to come up with our very own basic VA allocator for
MMIO. Since half of the HYP address space only contains a single
page (the idmap), we have plenty to borrow from. Let's use the idmap
as a base, and allocate downwards from it. GICv2 now lives on the
other side of the great VA barrier.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 virt/kvm/arm/mmu.c | 40 ++++++++++++++++++++++++++++------------
 1 file changed, 28 insertions(+), 12 deletions(-)

diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index 6192d45d1e1a..0597c9846f1a 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -43,6 +43,9 @@ static unsigned long hyp_idmap_start;
 static unsigned long hyp_idmap_end;
 static phys_addr_t hyp_idmap_vector;
 
+static DEFINE_MUTEX(io_map_lock);
+static unsigned long io_map_base;
+
 #define S2_PGD_SIZE	(PTRS_PER_S2_PGD * sizeof(pgd_t))
 #define hyp_pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
 
@@ -502,27 +505,31 @@ static void unmap_hyp_range(pgd_t *pgdp, phys_addr_t start, u64 size)
  *
  * Assumes hyp_pgd is a page table used strictly in Hyp-mode and
  * therefore contains either mappings in the kernel memory area (above
- * PAGE_OFFSET), or device mappings in the vmalloc range (from
- * VMALLOC_START to VMALLOC_END).
+ * PAGE_OFFSET), or device mappings in the idmap range.
  *
- * boot_hyp_pgd should only map two pages for the init code.
+ * boot_hyp_pgd should only map the idmap range, and is only used in
+ * the extended idmap case.
  */
 void free_hyp_pgds(void)
 {
+	pgd_t *id_pgd;
+
 	mutex_lock(&kvm_hyp_pgd_mutex);
 
+	id_pgd = boot_hyp_pgd ? boot_hyp_pgd : hyp_pgd;
+
+	if (id_pgd)
+		unmap_hyp_range(id_pgd, io_map_base,
+				hyp_idmap_start + PAGE_SIZE - io_map_base);
+
 	if (boot_hyp_pgd) {
-		unmap_hyp_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
 		free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order);
 		boot_hyp_pgd = NULL;
 	}
 
 	if (hyp_pgd) {
-		unmap_hyp_range(hyp_pgd, hyp_idmap_start, PAGE_SIZE);
 		unmap_hyp_range(hyp_pgd, kern_hyp_va(PAGE_OFFSET),
 				(uintptr_t)high_memory - PAGE_OFFSET);
-		unmap_hyp_range(hyp_pgd, kern_hyp_va(VMALLOC_START),
-				VMALLOC_END - VMALLOC_START);
 
 		free_pages((unsigned long)hyp_pgd, hyp_pgd_order);
 		hyp_pgd = NULL;
@@ -721,7 +728,8 @@ int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
 			   void __iomem **kaddr,
 			   void __iomem **haddr)
 {
-	unsigned long start, end;
+	pgd_t *pgd = hyp_pgd;
+	unsigned long base;
 	int ret;
 
 	*kaddr = ioremap(phys_addr, size);
@@ -733,19 +741,26 @@ int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
 		return 0;
 	}
 
+	mutex_lock(&io_map_lock);
+
+	base = io_map_base - size;
+	base &= ~(size - 1);
+
+	if (__kvm_cpu_uses_extended_idmap())
+		pgd = boot_hyp_pgd;
 
-	start = kern_hyp_va((unsigned long)*kaddr);
-	end = kern_hyp_va((unsigned long)*kaddr + size);
-	ret = __create_hyp_mappings(hyp_pgd, start, end,
+	ret = __create_hyp_mappings(pgd, base, base + size,
 				     __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE);
 
 	if (ret) {
 		iounmap(*kaddr);
 		*kaddr = NULL;
 	} else {
-		*haddr = (void __iomem *)start;
+		*haddr = (void __iomem *)base;
+		io_map_base = base;
 	}
 
+	mutex_unlock(&io_map_lock);
 	return ret;
 }
 
@@ -1826,6 +1841,7 @@ int kvm_mmu_init(void)
 			goto out;
 	}
 
+	io_map_base = hyp_idmap_start;
 	return 0;
 out:
 	free_hyp_pgds();
-- 
2.14.2

  parent reply	other threads:[~2017-12-11 14:46 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-11 14:49 [PATCH v2 00/19] KVM/arm64: Randomise EL2 mappings Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 01/19] arm64: asm-offsets: Avoid clashing DMA definitions Marc Zyngier
2017-12-11 15:03   ` Russell King - ARM Linux
2017-12-11 15:22     ` Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 02/19] arm64: asm-offsets: Remove unused definitions Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 03/19] arm64: asm-offsets: Remove potential circular dependency Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 04/19] arm64: alternatives: Enforce alignment of struct alt_instr Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 05/19] arm64: alternatives: Add dynamic patching feature Marc Zyngier
2017-12-13 17:53   ` Catalin Marinas
2017-12-14 12:22     ` Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 06/19] arm64: insn: Add N immediate encoding Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 07/19] arm64: insn: Add encoder for bitwise operations using litterals Marc Zyngier
2017-12-12 18:32   ` James Morse
2017-12-12 23:40     ` Peter Maydell
2017-12-13 14:32     ` Marc Zyngier
2017-12-13 15:45       ` James Morse
2017-12-13 15:52         ` Marc Zyngier
2017-12-14  8:40         ` Marc Zyngier
2017-12-12 18:56   ` Peter Maydell
2017-12-11 14:49 ` [PATCH v2 08/19] arm64: KVM: Dynamically patch the kernel/hyp VA mask Marc Zyngier
2017-12-14 13:17   ` James Morse
2017-12-14 13:27     ` Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 09/19] arm64: cpufeatures: Drop the ARM64_HYP_OFFSET_LOW feature flag Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 10/19] KVM: arm/arm64: Do not use kern_hyp_va() with kvm_vgic_global_state Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 11/19] KVM: arm/arm64: Demote HYP VA range display to being a debug feature Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 12/19] KVM: arm/arm64: Move ioremap calls to create_hyp_io_mappings Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 13/19] KVM: arm/arm64: Keep GICv2 HYP VAs in kvm_vgic_global_state Marc Zyngier
2017-12-11 14:49 ` Marc Zyngier [this message]
2017-12-11 14:49 ` [PATCH v2 15/19] arm64; insn: Add encoder for the EXTR instruction Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 16/19] arm64: insn: Allow ADD/SUB (immediate) with LSL #12 Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 17/19] arm64: KVM: Dynamically compute the HYP VA mask Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 18/19] arm64: KVM: Introduce EL2 VA randomisation Marc Zyngier
2017-12-11 14:49 ` [PATCH v2 19/19] arm64: Update the KVM memory map documentation Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171211144937.4537-15-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox