From: Anish Moorthy <amoorthy@google.com>
To: seanjc@google.com, oliver.upton@linux.dev, kvm@vger.kernel.org,
kvmarm@lists.linux.dev
Cc: pbonzini@redhat.com, maz@kernel.org, robert.hoo.linux@gmail.com,
jthoughton@google.com, amoorthy@google.com, bgardon@google.com,
dmatlack@google.com, ricarkol@google.com,
axelrasmussen@google.com, peterx@redhat.com,
nadav.amit@gmail.com, isaku.yamahata@gmail.com
Subject: [PATCH v4 16/16] KVM: selftests: Handle memory fault exits in demand_paging_test
Date: Fri, 2 Jun 2023 16:19:21 +0000 [thread overview]
Message-ID: <20230602161921.208564-17-amoorthy@google.com> (raw)
In-Reply-To: <20230602161921.208564-1-amoorthy@google.com>
Demonstrate a (very basic) scheme for supporting memory fault exits.
From the vCPU threads:
1. Simply issue UFFDIO_COPY/CONTINUEs in response to memory fault exits,
with the purpose of establishing the absent mappings. Do so with
wake_waiters=false to avoid serializing on the userfaultfd wait queue
locks.
2. When the UFFDIO_COPY/CONTINUE in (1) fails with EEXIST,
assume that the mapping was already established but is currently
absent [A] and attempt to populate it using MADV_POPULATE_WRITE.
Issue UFFDIO_COPY/CONTINUEs from the reader threads as well, but with
wake_waiters=true to ensure that any threads sleeping on the uffd are
eventually woken up.
A real VMM would track whether it had already COPY/CONTINUEd pages (eg,
via a bitmap) to avoid calls destined to EEXIST. However, even the
naive approach is enough to demonstrate the performance advantages of
KVM_EXIT_MEMORY_FAULT.
[A] In reality it is much likelier that the vCPU thread simply lost a
race to establish the mapping for the page.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
---
.../selftests/kvm/demand_paging_test.c | 235 +++++++++++++-----
1 file changed, 166 insertions(+), 69 deletions(-)
diff --git a/tools/testing/selftests/kvm/demand_paging_test.c b/tools/testing/selftests/kvm/demand_paging_test.c
index ffbc89300c46..4b79c88cb22d 100644
--- a/tools/testing/selftests/kvm/demand_paging_test.c
+++ b/tools/testing/selftests/kvm/demand_paging_test.c
@@ -15,6 +15,7 @@
#include <time.h>
#include <pthread.h>
#include <linux/userfaultfd.h>
+#include <linux/mman.h>
#include <sys/syscall.h>
#include "kvm_util.h"
@@ -31,36 +32,99 @@ static uint64_t guest_percpu_mem_size = DEFAULT_PER_VCPU_MEM_SIZE;
static size_t demand_paging_size;
static char *guest_data_prototype;
+static int num_uffds;
+static size_t uffd_region_size;
+static struct uffd_desc **uffd_descs;
+/*
+ * Delay when demand paging is performed through userfaultfd or directly by
+ * vcpu_worker in the case of a KVM_EXIT_MEMORY_FAULT.
+ */
+static useconds_t uffd_delay;
+static int uffd_mode;
+
+
+static int handle_uffd_page_request(int uffd_mode, int uffd, uint64_t hva,
+ bool is_vcpu);
+
+static void madv_write_or_err(uint64_t gpa)
+{
+ int r;
+ void *hva = addr_gpa2hva(memstress_args.vm, gpa);
+
+ r = madvise(hva, demand_paging_size, MADV_POPULATE_WRITE);
+ TEST_ASSERT(r == 0,
+ "MADV_POPULATE_WRITE on hva 0x%lx (gpa 0x%lx) fail, errno %i\n",
+ (uintptr_t) hva, gpa, errno);
+}
+
+static void ready_page(uint64_t gpa)
+{
+ int r, uffd;
+
+ /*
+ * This test only registers memslot 1 w/ userfaultfd. Any accesses outside
+ * the registered ranges should fault in the physical pages through
+ * MADV_POPULATE_WRITE.
+ */
+ if ((gpa < memstress_args.gpa)
+ || (gpa >= memstress_args.gpa + memstress_args.size)) {
+ madv_write_or_err(gpa);
+ } else {
+ if (uffd_delay)
+ usleep(uffd_delay);
+
+ uffd = uffd_descs[(gpa - memstress_args.gpa) / uffd_region_size]->uffd;
+
+ r = handle_uffd_page_request(uffd_mode, uffd,
+ (uint64_t) addr_gpa2hva(memstress_args.vm, gpa), true);
+
+ if (r == EEXIST)
+ madv_write_or_err(gpa);
+ }
+}
+
static void vcpu_worker(struct memstress_vcpu_args *vcpu_args)
{
struct kvm_vcpu *vcpu = vcpu_args->vcpu;
int vcpu_idx = vcpu_args->vcpu_idx;
struct kvm_run *run = vcpu->run;
- struct timespec start;
- struct timespec ts_diff;
+ struct timespec last_start;
+ struct timespec total_runtime = {};
int ret;
- clock_gettime(CLOCK_MONOTONIC, &start);
- /* Let the guest access its memory */
- ret = _vcpu_run(vcpu);
- TEST_ASSERT(ret == 0, "vcpu_run failed: %d\n", ret);
- if (get_ucall(vcpu, NULL) != UCALL_SYNC) {
- TEST_ASSERT(false,
- "Invalid guest sync status: exit_reason=%s\n",
- exit_reason_str(run->exit_reason));
- }
+ while (true) {
+ clock_gettime(CLOCK_MONOTONIC, &last_start);
+ /* Let the guest access its memory */
+ ret = _vcpu_run(vcpu);
+ TEST_ASSERT(ret == 0
+ || (errno == EFAULT
+ && run->exit_reason == KVM_EXIT_MEMORY_FAULT),
+ "vcpu_run failed: %d\n", ret);
- ts_diff = timespec_elapsed(start);
+ total_runtime = timespec_add(total_runtime,
+ timespec_elapsed(last_start));
+ if (ret != 0 && get_ucall(vcpu, NULL) != UCALL_SYNC) {
+
+ if (run->exit_reason == KVM_EXIT_MEMORY_FAULT) {
+ ready_page(run->memory_fault.gpa);
+ continue;
+ }
+
+ TEST_ASSERT(false,
+ "Invalid guest sync status: exit_reason=%s\n",
+ exit_reason_str(run->exit_reason));
+ }
+ break;
+ }
PER_VCPU_DEBUG("vCPU %d execution time: %ld.%.9lds\n", vcpu_idx,
- ts_diff.tv_sec, ts_diff.tv_nsec);
+ total_runtime.tv_sec, total_runtime.tv_nsec);
}
-static int handle_uffd_page_request(int uffd_mode, int uffd,
- struct uffd_msg *msg)
+static int handle_uffd_page_request(int uffd_mode, int uffd, uint64_t hva,
+ bool is_vcpu)
{
pid_t tid = syscall(__NR_gettid);
- uint64_t addr = msg->arg.pagefault.address;
struct timespec start;
struct timespec ts_diff;
int r;
@@ -71,16 +135,15 @@ static int handle_uffd_page_request(int uffd_mode, int uffd,
struct uffdio_copy copy;
copy.src = (uint64_t)guest_data_prototype;
- copy.dst = addr;
+ copy.dst = hva;
copy.len = demand_paging_size;
- copy.mode = 0;
+ copy.mode = is_vcpu ? UFFDIO_COPY_MODE_DONTWAKE : 0;
- r = ioctl(uffd, UFFDIO_COPY, ©);
/*
- * With multiple vCPU threads fault on a single page and there are
- * multiple readers for the UFFD, at least one of the UFFDIO_COPYs
- * will fail with EEXIST: handle that case without signaling an
- * error.
+ * With multiple vCPU threads and at least one of multiple reader threads
+ * or vCPU memory faults, multiple vCPUs accessing an absent page will
+ * almost certainly cause some thread doing the UFFDIO_COPY here to get
+ * EEXIST: make sure to allow that case.
*
* Note that this also suppress any EEXISTs occurring from,
* e.g., the first UFFDIO_COPY/CONTINUEs on a page. That never
@@ -88,23 +151,24 @@ static int handle_uffd_page_request(int uffd_mode, int uffd,
* some external state to correctly surface EEXISTs to userspace
* (or prevent duplicate COPY/CONTINUEs in the first place).
*/
- if (r == -1 && errno != EEXIST) {
- pr_info("Failed UFFDIO_COPY in 0x%lx from thread %d, errno = %d\n",
- addr, tid, errno);
- return r;
- }
+ r = ioctl(uffd, UFFDIO_COPY, ©);
+ TEST_ASSERT(r == 0 || errno == EEXIST,
+ "Thread 0x%x failed UFFDIO_COPY on hva 0x%lx, errno = %d",
+ tid, hva, errno);
} else if (uffd_mode == UFFDIO_REGISTER_MODE_MINOR) {
+ /* The comments in the UFFDIO_COPY branch also apply here. */
struct uffdio_continue cont = {0};
- cont.range.start = addr;
+ cont.range.start = hva;
cont.range.len = demand_paging_size;
+ cont.mode = is_vcpu ? UFFDIO_CONTINUE_MODE_DONTWAKE : 0;
r = ioctl(uffd, UFFDIO_CONTINUE, &cont);
/*
- * With multiple vCPU threads fault on a single page and there are
- * multiple readers for the UFFD, at least one of the UFFDIO_COPYs
- * will fail with EEXIST: handle that case without signaling an
- * error.
+ * With multiple vCPU threads and at least one of multiple reader threads
+ * or vCPU memory faults, multiple vCPUs accessing an absent page will
+ * almost certainly cause some thread doing the UFFDIO_COPY here to get
+ * EEXIST: make sure to allow that case.
*
* Note that this also suppress any EEXISTs occurring from,
* e.g., the first UFFDIO_COPY/CONTINUEs on a page. That never
@@ -112,32 +176,54 @@ static int handle_uffd_page_request(int uffd_mode, int uffd,
* some external state to correctly surface EEXISTs to userspace
* (or prevent duplicate COPY/CONTINUEs in the first place).
*/
- if (r == -1 && errno != EEXIST) {
- pr_info("Failed UFFDIO_CONTINUE in 0x%lx, thread %d, errno = %d\n",
- addr, tid, errno);
- return r;
- }
+ TEST_ASSERT(r == 0 || errno == EEXIST,
+ "Thread 0x%x failed UFFDIO_CONTINUE on hva 0x%lx, errno = %d",
+ tid, hva, errno);
} else {
TEST_FAIL("Invalid uffd mode %d", uffd_mode);
}
+ /*
+ * If the above UFFDIO_COPY/CONTINUE failed with EEXIST, waiting threads
+ * will not have been woken: wake them here.
+ */
+ if (!is_vcpu && r != 0) {
+ struct uffdio_range range = {
+ .start = hva,
+ .len = demand_paging_size
+ };
+ r = ioctl(uffd, UFFDIO_WAKE, &range);
+ TEST_ASSERT(r == 0,
+ "Thread 0x%x failed UFFDIO_WAKE on hva 0x%lx, errno = %d",
+ tid, hva, errno);
+ }
+
ts_diff = timespec_elapsed(start);
PER_PAGE_DEBUG("UFFD page-in %d \t%ld ns\n", tid,
timespec_to_ns(ts_diff));
PER_PAGE_DEBUG("Paged in %ld bytes at 0x%lx from thread %d\n",
- demand_paging_size, addr, tid);
+ demand_paging_size, hva, tid);
return 0;
}
+static int handle_uffd_page_request_from_uffd(int uffd_mode, int uffd,
+ struct uffd_msg *msg)
+{
+ TEST_ASSERT(msg->event == UFFD_EVENT_PAGEFAULT,
+ "Received uffd message with event %d != UFFD_EVENT_PAGEFAULT",
+ msg->event);
+ return handle_uffd_page_request(uffd_mode, uffd,
+ msg->arg.pagefault.address, false);
+}
+
struct test_params {
- int uffd_mode;
bool single_uffd;
- useconds_t uffd_delay;
int readers_per_uffd;
enum vm_mem_backing_src_type src_type;
bool partition_vcpu_memory_access;
+ bool memfault_exits;
};
static void prefault_mem(void *alias, uint64_t len)
@@ -155,16 +241,22 @@ static void run_test(enum vm_guest_mode mode, void *arg)
{
struct memstress_vcpu_args *vcpu_args;
struct test_params *p = arg;
- struct uffd_desc **uffd_descs = NULL;
struct timespec start;
struct timespec ts_diff;
struct kvm_vm *vm;
- int i, num_uffds = 0;
+ int i;
double vcpu_paging_rate;
- uint64_t uffd_region_size;
+ uint32_t slot_flags = 0;
+ bool uffd_memfault_exits = uffd_mode && p->memfault_exits;
- vm = memstress_create_vm(mode, nr_vcpus, guest_percpu_mem_size, 1, 0,
- p->src_type, p->partition_vcpu_memory_access);
+ if (uffd_memfault_exits) {
+ TEST_ASSERT(kvm_has_cap(KVM_CAP_NOWAIT_ON_FAULT) > 0,
+ "KVM does not have KVM_CAP_NOWAIT_ON_FAULT");
+ slot_flags = KVM_MEM_NOWAIT_ON_FAULT;
+ }
+
+ vm = memstress_create_vm(mode, nr_vcpus, guest_percpu_mem_size,
+ 1, slot_flags, p->src_type, p->partition_vcpu_memory_access);
demand_paging_size = get_backing_src_pagesz(p->src_type);
@@ -173,21 +265,21 @@ static void run_test(enum vm_guest_mode mode, void *arg)
"Failed to allocate buffer for guest data pattern");
memset(guest_data_prototype, 0xAB, demand_paging_size);
- if (p->uffd_mode == UFFDIO_REGISTER_MODE_MINOR) {
- num_uffds = p->single_uffd ? 1 : nr_vcpus;
- for (i = 0; i < num_uffds; i++) {
- vcpu_args = &memstress_args.vcpu_args[i];
- prefault_mem(addr_gpa2alias(vm, vcpu_args->gpa),
- vcpu_args->pages * memstress_args.guest_page_size);
- }
- }
-
- if (p->uffd_mode) {
+ if (uffd_mode) {
num_uffds = p->single_uffd ? 1 : nr_vcpus;
uffd_region_size = nr_vcpus * guest_percpu_mem_size / num_uffds;
+ if (uffd_mode == UFFDIO_REGISTER_MODE_MINOR) {
+ for (i = 0; i < num_uffds; i++) {
+ vcpu_args = &memstress_args.vcpu_args[i];
+ prefault_mem(addr_gpa2alias(vm, vcpu_args->gpa),
+ uffd_region_size);
+ }
+ }
+
uffd_descs = malloc(num_uffds * sizeof(struct uffd_desc *));
- TEST_ASSERT(uffd_descs, "Memory allocation failed");
+ TEST_ASSERT(uffd_descs, "Failed to allocate uffd descriptors");
+
for (i = 0; i < num_uffds; i++) {
struct memstress_vcpu_args *vcpu_args;
void *vcpu_hva;
@@ -201,10 +293,10 @@ static void run_test(enum vm_guest_mode mode, void *arg)
* requests.
*/
uffd_descs[i] = uffd_setup_demand_paging(
- p->uffd_mode, p->uffd_delay, vcpu_hva,
+ uffd_mode, uffd_delay, vcpu_hva,
uffd_region_size,
p->readers_per_uffd,
- &handle_uffd_page_request);
+ &handle_uffd_page_request_from_uffd);
}
}
@@ -218,7 +310,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
ts_diff = timespec_elapsed(start);
pr_info("All vCPU threads joined\n");
- if (p->uffd_mode) {
+ if (uffd_mode) {
/* Tell the user fault fd handler threads to quit */
for (i = 0; i < num_uffds; i++)
uffd_stop_demand_paging(uffd_descs[i]);
@@ -239,7 +331,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
memstress_destroy_vm(vm);
free(guest_data_prototype);
- if (p->uffd_mode)
+ if (uffd_mode)
free(uffd_descs);
}
@@ -248,7 +340,7 @@ static void help(char *name)
puts("");
printf("usage: %s [-h] [-m vm_mode] [-u uffd_mode] [-a]\n"
" [-d uffd_delay_usec] [-r readers_per_uffd] [-b memory]\n"
- " [-s type] [-v vcpus] [-o]\n", name);
+ " [-w] [-s type] [-v vcpus] [-o]\n", name);
guest_modes_help();
printf(" -u: use userfaultfd to handle vCPU page faults. Mode is a\n"
" UFFD registration mode: 'MISSING' or 'MINOR'.\n");
@@ -259,6 +351,7 @@ static void help(char *name)
" FD handler to simulate demand paging\n"
" overheads. Ignored without -u.\n");
printf(" -r: Set the number of reader threads per uffd.\n");
+ printf(" -w: Enable kvm cap for memory fault exits.\n");
printf(" -b: specify the size of the memory region which should be\n"
" demand paged by each vCPU. e.g. 10M or 3G.\n"
" Default: 1G\n");
@@ -278,29 +371,30 @@ int main(int argc, char *argv[])
.partition_vcpu_memory_access = true,
.readers_per_uffd = 1,
.single_uffd = false,
+ .memfault_exits = false,
};
int opt;
guest_modes_append_default();
- while ((opt = getopt(argc, argv, "ahom:u:d:b:s:v:r:")) != -1) {
+ while ((opt = getopt(argc, argv, "ahowm:u:d:b:s:v:r:")) != -1) {
switch (opt) {
case 'm':
guest_modes_cmdline(optarg);
break;
case 'u':
if (!strcmp("MISSING", optarg))
- p.uffd_mode = UFFDIO_REGISTER_MODE_MISSING;
+ uffd_mode = UFFDIO_REGISTER_MODE_MISSING;
else if (!strcmp("MINOR", optarg))
- p.uffd_mode = UFFDIO_REGISTER_MODE_MINOR;
- TEST_ASSERT(p.uffd_mode, "UFFD mode must be 'MISSING' or 'MINOR'.");
+ uffd_mode = UFFDIO_REGISTER_MODE_MINOR;
+ TEST_ASSERT(uffd_mode, "UFFD mode must be 'MISSING' or 'MINOR'.");
break;
case 'a':
p.single_uffd = true;
break;
case 'd':
- p.uffd_delay = strtoul(optarg, NULL, 0);
- TEST_ASSERT(p.uffd_delay >= 0, "A negative UFFD delay is not supported.");
+ uffd_delay = strtoul(optarg, NULL, 0);
+ TEST_ASSERT(uffd_delay >= 0, "A negative UFFD delay is not supported.");
break;
case 'b':
guest_percpu_mem_size = parse_size(optarg);
@@ -323,6 +417,9 @@ int main(int argc, char *argv[])
"Invalid number of readers per uffd %d: must be >=1",
p.readers_per_uffd);
break;
+ case 'w':
+ p.memfault_exits = true;
+ break;
case 'h':
default:
help(argv[0]);
@@ -330,7 +427,7 @@ int main(int argc, char *argv[])
}
}
- if (p.uffd_mode == UFFDIO_REGISTER_MODE_MINOR &&
+ if (uffd_mode == UFFDIO_REGISTER_MODE_MINOR &&
!backing_src_is_shared(p.src_type)) {
TEST_FAIL("userfaultfd MINOR mode requires shared memory; pick a different -s");
}
--
2.41.0.rc0.172.g3f132b7071-goog
next prev parent reply other threads:[~2023-06-02 16:20 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 16:19 [PATCH v4 00/16] Improve scalability of KVM + userfaultfd live migration via annotated memory faults Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 01/16] KVM: Allow hva_pfn_fast() to resolve read-only faults Anish Moorthy
2023-06-14 14:39 ` Sean Christopherson
2023-06-14 16:57 ` Anish Moorthy
2023-08-10 19:54 ` Anish Moorthy
2023-08-10 23:48 ` Sean Christopherson
2023-06-02 16:19 ` [PATCH v4 02/16] KVM: x86: Set vCPU exit reason to KVM_EXIT_UNKNOWN at the start of KVM_RUN Anish Moorthy
2023-06-02 20:30 ` Isaku Yamahata
2023-06-05 16:41 ` Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 03/16] KVM: Add KVM_CAP_MEMORY_FAULT_INFO Anish Moorthy
2023-06-03 16:58 ` Isaku Yamahata
2023-06-05 16:37 ` Anish Moorthy
2023-06-14 14:55 ` Sean Christopherson
2023-06-05 17:46 ` Anish Moorthy
2023-06-14 17:35 ` Sean Christopherson
2023-06-20 21:13 ` Anish Moorthy
2023-07-07 11:50 ` Kautuk Consul
2023-07-10 15:00 ` Anish Moorthy
2023-07-11 3:54 ` Kautuk Consul
2023-07-11 14:25 ` Sean Christopherson
2023-08-11 22:12 ` Anish Moorthy
2023-08-14 18:01 ` Sean Christopherson
2023-08-15 0:06 ` Anish Moorthy
2023-08-15 0:43 ` Sean Christopherson
2023-08-15 17:01 ` Anish Moorthy
2023-08-16 15:58 ` Sean Christopherson
2023-08-16 21:28 ` Anish Moorthy
2023-08-17 23:58 ` Sean Christopherson
2023-08-18 17:32 ` Anish Moorthy
2023-08-23 22:20 ` Sean Christopherson
2023-08-23 23:38 ` Anish Moorthy
2023-08-24 17:24 ` Sean Christopherson
2023-08-17 22:55 ` Anish Moorthy
2023-07-05 8:21 ` Kautuk Consul
2023-06-02 16:19 ` [PATCH v4 04/16] KVM: Add docstrings to __kvm_write_guest_page() and __kvm_read_guest_page() Anish Moorthy
2023-06-15 2:41 ` Robert Hoo
2023-08-14 22:51 ` Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 05/16] KVM: Annotate -EFAULTs from kvm_vcpu_write_guest_page() Anish Moorthy
2023-06-14 19:10 ` Sean Christopherson
2023-07-06 22:51 ` Anish Moorthy
2023-07-12 14:08 ` Sean Christopherson
2023-06-02 16:19 ` [PATCH v4 06/16] KVM: Annotate -EFAULTs from kvm_vcpu_read_guest_page() Anish Moorthy
2023-06-14 19:22 ` Sean Christopherson
2023-07-07 17:35 ` Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 07/16] KVM: Simplify error handling in __gfn_to_pfn_memslot() Anish Moorthy
2023-06-14 19:26 ` Sean Christopherson
2023-07-07 17:33 ` Anish Moorthy
2023-07-10 17:40 ` Sean Christopherson
2023-06-02 16:19 ` [PATCH v4 08/16] KVM: x86: Annotate -EFAULTs from kvm_handle_error_pfn() Anish Moorthy
2023-06-14 20:03 ` Sean Christopherson
2023-07-07 18:05 ` Anish Moorthy
2023-06-15 2:43 ` Robert Hoo
2023-06-15 14:40 ` Sean Christopherson
2023-06-02 16:19 ` [PATCH v4 09/16] KVM: Introduce KVM_CAP_NOWAIT_ON_FAULT without implementation Anish Moorthy
2023-06-14 20:11 ` Sean Christopherson
2023-07-06 19:04 ` Anish Moorthy
2023-06-14 21:20 ` Sean Christopherson
2023-06-14 21:23 ` Sean Christopherson
2023-08-23 21:17 ` Anish Moorthy
2023-06-15 3:55 ` Wang, Wei W
2023-06-15 14:56 ` Sean Christopherson
2023-06-16 12:08 ` Wang, Wei W
2023-07-07 18:13 ` Anish Moorthy
2023-07-07 20:07 ` Anish Moorthy
2023-07-11 15:29 ` Sean Christopherson
2023-08-25 0:15 ` Anish Moorthy
2023-08-29 22:41 ` Sean Christopherson
2023-08-30 16:21 ` Anish Moorthy
2023-09-07 21:17 ` Sean Christopherson
2023-06-02 16:19 ` [PATCH v4 10/16] KVM: x86: Implement KVM_CAP_NOWAIT_ON_FAULT Anish Moorthy
2023-06-14 20:25 ` Sean Christopherson
2023-07-07 17:41 ` Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 11/16] KVM: arm64: " Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 12/16] KVM: selftests: Report per-vcpu demand paging rate from demand paging test Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 13/16] KVM: selftests: Allow many vCPUs and reader threads per UFFD in " Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 14/16] KVM: selftests: Use EPOLL in userfaultfd_util reader threads and signal errors via TEST_ASSERT Anish Moorthy
2023-06-02 16:19 ` [PATCH v4 15/16] KVM: selftests: Add memslot_flags parameter to memstress_create_vm() Anish Moorthy
2023-06-02 16:19 ` Anish Moorthy [this message]
2023-06-20 2:44 ` [PATCH v4 16/16] KVM: selftests: Handle memory fault exits in demand_paging_test Robert Hoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602161921.208564-17-amoorthy@google.com \
--to=amoorthy@google.com \
--cc=axelrasmussen@google.com \
--cc=bgardon@google.com \
--cc=dmatlack@google.com \
--cc=isaku.yamahata@gmail.com \
--cc=jthoughton@google.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=maz@kernel.org \
--cc=nadav.amit@gmail.com \
--cc=oliver.upton@linux.dev \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=ricarkol@google.com \
--cc=robert.hoo.linux@gmail.com \
--cc=seanjc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox