[PATCH v5 00/43] arm64: Support for Arm CCA in KVM

[Steven Price <steven.price@arm.com>]

This series adds support for running protected VMs using KVM under the
Arm Confidential Compute Architecture (CCA).

The related guest support was posted[1] earlier. As with the guest this
series moves to the "v1.0-rel0" version of the specification[2].

Almost all changes since v4[3] are either due to rebasing or minor
changes to improve the code following review comments. There are two bug
fixes:

 * Setting the GPRS on entry after an exit where the host is allowed to
   change registers is now done in kvm_rec_enter(). This fixes a bug
   where register updates done by user space were being ignored.

 * Drop the PTE_SHARED bit for unprotected page table entries - this bit
   isn't controlled by the host and the RMM now enforces the bit is
   zero.

Major limitations:

 * Only supports 4k host PAGE_SIZE (if PAGE_SIZE != 4k then the realm
   extensions are disabled).

 * No support for huge pages when mapping the guest's pages. There is
   some 'dead' code left over from before guest_mem was supported. This
   is partly a current limitation of guest_memfd.

The ABI to the RMM (the RMI) is based on RMM v1.0-rel0 specification[2].

This series is based on v6.12-rc1. It is also available as a git
repository:

https://gitlab.arm.com/linux-arm/linux-cca cca-host/v5

Work in progress changes for kvmtool are available from the git
repository below:

https://gitlab.arm.com/linux-arm/kvmtool-cca cca/v3

[1] https://lore.kernel.org/r/20241004144307.66199-1-steven.price%40arm.com
[2] https://developer.arm.com/documentation/den0137/1-0rel0/
[3] https://lore.kernel.org/r/20240821153844.60084-1-steven.price%40arm.com

Jean-Philippe Brucker (7):
  arm64: RME: Propagate number of breakpoints and watchpoints to
    userspace
  arm64: RME: Set breakpoint parameters through SET_ONE_REG
  arm64: RME: Initialize PMCR.N with number counter supported by RMM
  arm64: RME: Propagate max SVE vector length from RMM
  arm64: RME: Configure max SVE vector length for a Realm
  arm64: RME: Provide register list for unfinalized RME RECs
  arm64: RME: Provide accurate register list

Joey Gouly (2):
  arm64: rme: allow userspace to inject aborts
  arm64: rme: support RSI_HOST_CALL

Sean Christopherson (1):
  KVM: Prepare for handling only shared mappings in mmu_notifier events

Steven Price (29):
  arm64: RME: Handle Granule Protection Faults (GPFs)
  arm64: RME: Add SMC definitions for calling the RMM
  arm64: RME: Add wrappers for RMI calls
  arm64: RME: Check for RME support at KVM init
  arm64: RME: Define the user ABI
  arm64: RME: ioctls to create and configure realms
  arm64: kvm: Allow passing machine type in KVM creation
  arm64: RME: Keep a spare page delegated to the RMM
  arm64: RME: RTT tear down
  arm64: RME: Allocate/free RECs to match vCPUs
  arm64: RME: Support for the VGIC in realms
  KVM: arm64: Support timers in realm RECs
  arm64: RME: Allow VMM to set RIPAS
  arm64: RME: Handle realm enter/exit
  KVM: arm64: Handle realm MMIO emulation
  arm64: RME: Allow populating initial contents
  arm64: RME: Runtime faulting of memory
  KVM: arm64: Handle realm VCPU load
  KVM: arm64: Validate register access for a Realm VM
  KVM: arm64: Handle Realm PSCI requests
  KVM: arm64: WARN on injected undef exceptions
  arm64: Don't expose stolen time for realm guests
  arm64: RME: Always use 4k pages for realms
  arm64: rme: Prevent Device mappings for Realms
  arm_pmu: Provide a mechanism for disabling the physical IRQ
  arm64: rme: Enable PMU support with a realm guest
  kvm: rme: Hide KVM_CAP_READONLY_MEM for realm guests
  arm64: kvm: Expose support for private memory
  KVM: arm64: Allow activating realms

Suzuki K Poulose (4):
  kvm: arm64: pgtable: Track the number of pages in the entry level
  kvm: arm64: Include kvm_emulate.h in kvm/arm_psci.h
  kvm: arm64: Expose debug HW register numbers for Realm
  arm64: rme: Allow checking SVE on VM instance

 Documentation/virt/kvm/api.rst       |    3 +
 arch/arm64/include/asm/kvm_emulate.h |   34 +
 arch/arm64/include/asm/kvm_host.h    |   16 +-
 arch/arm64/include/asm/kvm_pgtable.h |    2 +
 arch/arm64/include/asm/kvm_rme.h     |  155 +++
 arch/arm64/include/asm/rmi_cmds.h    |  510 ++++++++
 arch/arm64/include/asm/rmi_smc.h     |  255 ++++
 arch/arm64/include/asm/virt.h        |    1 +
 arch/arm64/include/uapi/asm/kvm.h    |   49 +
 arch/arm64/kvm/Kconfig               |    1 +
 arch/arm64/kvm/Makefile              |    3 +-
 arch/arm64/kvm/arch_timer.c          |   45 +-
 arch/arm64/kvm/arm.c                 |  166 ++-
 arch/arm64/kvm/guest.c               |   99 +-
 arch/arm64/kvm/hyp/pgtable.c         |    5 +-
 arch/arm64/kvm/hypercalls.c          |    4 +-
 arch/arm64/kvm/inject_fault.c        |    2 +
 arch/arm64/kvm/mmio.c                |   10 +-
 arch/arm64/kvm/mmu.c                 |  185 ++-
 arch/arm64/kvm/pmu-emul.c            |    7 +-
 arch/arm64/kvm/psci.c                |   29 +
 arch/arm64/kvm/reset.c               |   23 +-
 arch/arm64/kvm/rme-exit.c            |  207 ++++
 arch/arm64/kvm/rme.c                 | 1628 ++++++++++++++++++++++++++
 arch/arm64/kvm/sys_regs.c            |   83 +-
 arch/arm64/kvm/vgic/vgic-v3.c        |    8 +-
 arch/arm64/kvm/vgic/vgic.c           |   41 +-
 arch/arm64/mm/fault.c                |   31 +-
 drivers/perf/arm_pmu.c               |   15 +
 include/kvm/arm_arch_timer.h         |    2 +
 include/kvm/arm_pmu.h                |    4 +
 include/kvm/arm_psci.h               |    2 +
 include/linux/kvm_host.h             |    2 +
 include/linux/perf/arm_pmu.h         |    5 +
 include/uapi/linux/kvm.h             |   31 +-
 virt/kvm/kvm_main.c                  |    7 +
 36 files changed, 3569 insertions(+), 101 deletions(-)
 create mode 100644 arch/arm64/include/asm/kvm_rme.h
 create mode 100644 arch/arm64/include/asm/rmi_cmds.h
 create mode 100644 arch/arm64/include/asm/rmi_smc.h
 create mode 100644 arch/arm64/kvm/rme-exit.c
 create mode 100644 arch/arm64/kvm/rme.c

-- 
2.34.1