From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
broonie@kernel.org, maz@kernel.org, kvmarm@lists.linux.dev,
kvm@vger.kernel.org, joey.gouly@arm.com, oliver.upton@linux.dev,
shuah@kernel.org, pbonzini@redhat.com
Subject: [PATCH 3/3] KVM: selftests: Handle dead VM in vgic_init test
Date: Thu, 7 Nov 2024 10:38:50 +0100 [thread overview]
Message-ID: <20241107094000.70705-4-eric.auger@redhat.com> (raw)
In-Reply-To: <20241107094000.70705-1-eric.auger@redhat.com>
Commit df5fd75ee305 ("KVM: arm64: Don't eagerly teardown the vgic on init
error") changed the way the error is handled in case of incomplete
vgic setup. Now a KVM_REQ_VM_DEAD request is sent causing subsequent
KVM ioctl to fail. This now triggers a test assertion failure in
kvm_vm_free() which calls KVM_SET_USER_MEMORY_REGION2 ioctl.
Update the test so that it checks that after the partial vgic setup
the KVM_REQ_VM_DEAD has been sent and use the new kvm_vm_dead_free()
helper to free the resources.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/3f0918bf-0265-4714-9660-89b75da49859@sirena.org.uk/
---
.../testing/selftests/kvm/aarch64/vgic_init.c | 41 +++++++++++--------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c
index b3b5fb0ff0a9..845108afce5e 100644
--- a/tools/testing/selftests/kvm/aarch64/vgic_init.c
+++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c
@@ -101,6 +101,12 @@ static void vm_gic_destroy(struct vm_gic *v)
kvm_vm_free(v->vm);
}
+static void vm_dead_gic_destroy(struct vm_gic *v)
+{
+ close(v->gic_fd);
+ kvm_vm_dead_free(v->vm);
+}
+
struct vgic_region_attr {
uint64_t attr;
uint64_t size;
@@ -335,7 +341,7 @@ static void test_vgic_then_vcpus(uint32_t gic_dev_type)
{
struct kvm_vcpu *vcpus[NR_VCPUS];
struct vm_gic v;
- int ret, i;
+ int i;
v = vm_gic_create_with_vcpus(gic_dev_type, 1, vcpus);
@@ -345,10 +351,10 @@ static void test_vgic_then_vcpus(uint32_t gic_dev_type)
for (i = 1; i < NR_VCPUS; ++i)
vcpus[i] = vm_vcpu_add(v.vm, i, guest_code);
- ret = run_vcpu(vcpus[3]);
- TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
+ run_vcpu(vcpus[3]);
+ TEST_ASSERT(vm_dead(v.vm), "dist/rdist overlap detected on 1st vcpu run");
- vm_gic_destroy(&v);
+ vm_dead_gic_destroy(&v);
}
/* All the VCPUs are created before the VGIC KVM device gets initialized */
@@ -356,16 +362,15 @@ static void test_vcpus_then_vgic(uint32_t gic_dev_type)
{
struct kvm_vcpu *vcpus[NR_VCPUS];
struct vm_gic v;
- int ret;
v = vm_gic_create_with_vcpus(gic_dev_type, NR_VCPUS, vcpus);
subtest_dist_rdist(&v);
- ret = run_vcpu(vcpus[3]);
- TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
+ run_vcpu(vcpus[3]);
+ TEST_ASSERT(vm_dead(v.vm), "dist/rdist overlap detected on 1st vcpu run");
- vm_gic_destroy(&v);
+ vm_dead_gic_destroy(&v);
}
#define KVM_VGIC_V2_ATTR(offset, cpu) \
@@ -415,9 +420,9 @@ static void test_v3_new_redist_regions(void)
kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
- ret = run_vcpu(vcpus[3]);
- TEST_ASSERT(ret == -ENXIO, "running without sufficient number of rdists");
- vm_gic_destroy(&v);
+ run_vcpu(vcpus[3]);
+ TEST_ASSERT(vm_dead(v.vm), "running without sufficient number of rdists");
+ vm_dead_gic_destroy(&v);
/* step2 */
@@ -428,10 +433,10 @@ static void test_v3_new_redist_regions(void)
kvm_device_attr_set(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr);
- ret = run_vcpu(vcpus[3]);
- TEST_ASSERT(ret == -EBUSY, "running without vgic explicit init");
+ run_vcpu(vcpus[3]);
+ TEST_ASSERT(vm_dead(v.vm), "running without vgic explicit init");
- vm_gic_destroy(&v);
+ vm_dead_gic_destroy(&v);
/* step 3 */
@@ -604,8 +609,8 @@ static void test_v3_redist_ipa_range_check_at_vcpu_run(void)
{
struct kvm_vcpu *vcpus[NR_VCPUS];
struct vm_gic v;
- int ret, i;
uint64_t addr;
+ int i;
v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, 1, vcpus);
@@ -626,11 +631,11 @@ static void test_v3_redist_ipa_range_check_at_vcpu_run(void)
KVM_DEV_ARM_VGIC_CTRL_INIT, NULL);
/* Attempt to run a vcpu without enough redist space. */
- ret = run_vcpu(vcpus[2]);
- TEST_ASSERT(ret && errno == EINVAL,
+ run_vcpu(vcpus[2]);
+ TEST_ASSERT(vm_dead(v.vm),
"redist base+size above PA range detected on 1st vcpu run");
- vm_gic_destroy(&v);
+ vm_dead_gic_destroy(&v);
}
static void test_v3_its_region(void)
--
2.41.0
prev parent reply other threads:[~2024-11-07 9:40 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 9:38 [PATCH 0/3] KVM: arm64: Handle KVM_REQ_VM_DEAD in vgic_init test Eric Auger
2024-11-07 9:38 ` [PATCH 1/3] KVM: selftests: Introduce vm_dead() Eric Auger
2024-11-07 9:38 ` [PATCH 2/3] KVM: selftests: Introduce kvm_vm_dead_free Eric Auger
2024-11-07 17:55 ` Sean Christopherson
2024-11-07 18:17 ` Mark Brown
2024-11-07 19:08 ` Oliver Upton
2024-11-07 19:56 ` Sean Christopherson
2024-11-07 20:12 ` Oliver Upton
2024-11-07 20:26 ` Sean Christopherson
2024-11-11 19:46 ` Oliver Upton
2024-11-08 8:55 ` Eric Auger
2024-11-08 9:00 ` Eric Auger
2024-11-08 17:18 ` Oliver Upton
2024-11-07 9:38 ` Eric Auger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107094000.70705-4-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=broonie@kernel.org \
--cc=eric.auger.pro@gmail.com \
--cc=joey.gouly@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=pbonzini@redhat.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox