From: Oliver Upton <oliver.upton@linux.dev>
To: kvmarm@lists.linux.dev
Cc: Marc Zyngier <maz@kernel.org>, Joey Gouly <joey.gouly@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
Mingwei Zhang <mizhang@google.com>,
Colton Lewis <coltonlewis@google.com>,
Raghavendra Rao Ananta <rananta@google.com>,
James Clark <james.clark@linaro.org>,
Oliver Upton <oliver.upton@linux.dev>
Subject: [PATCH v4 13/19] KVM: arm64: Compute MDCR_EL2 at vcpu_load()
Date: Thu, 19 Dec 2024 14:41:10 -0800 [thread overview]
Message-ID: <20241219224116.3941496-14-oliver.upton@linux.dev> (raw)
In-Reply-To: <20241219224116.3941496-1-oliver.upton@linux.dev>
KVM has picked up several hacks to cope with vcpu->arch.mdcr_el2 needing
to be prepared before vcpu_load(), which is when it gets programmed
into hardware on VHE.
Now that the flows for reprogramming MDCR_EL2 have been simplified, move
that computation to vcpu_load().
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
---
arch/arm64/include/asm/kvm_host.h | 1 -
arch/arm64/kvm/arm.c | 2 --
arch/arm64/kvm/debug.c | 21 ++++-----------------
3 files changed, 4 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index d61b8ed32a21..c630d59e7f4c 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -1341,7 +1341,6 @@ static inline bool kvm_system_needs_idmapped_vectors(void)
static inline void kvm_arch_sync_events(struct kvm *kvm) {}
void kvm_init_host_debug_data(void);
-void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 44a6093b0d9e..ec581aeb41f9 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -804,8 +804,6 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
kvm_init_mpidr_data(kvm);
- kvm_arm_vcpu_init_debug(vcpu);
-
if (likely(irqchip_in_kernel(kvm))) {
/*
* Map the VGIC hardware resources before running a vcpu the
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index bf348c86758f..900a63030fda 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -98,20 +98,6 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
preempt_enable();
}
-/**
- * kvm_arm_vcpu_init_debug - setup vcpu debug traps
- *
- * @vcpu: the vcpu pointer
- *
- * Set vcpu initial mdcr_el2 value.
- */
-void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
-{
- preempt_disable();
- kvm_arm_setup_mdcr_el2(vcpu);
- preempt_enable();
-}
-
/**
* kvm_arm_setup_debug - set up debug related stuff
*
@@ -129,12 +115,10 @@ void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
{
- unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
+ unsigned long mdscr;
trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
- kvm_arm_setup_mdcr_el2(vcpu);
-
/* Check if we need to use the debug registers. */
if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) {
/* Save guest debug state */
@@ -277,6 +261,8 @@ void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu)
else
vcpu->arch.debug_owner = VCPU_DEBUG_FREE;
}
+
+ kvm_arm_setup_mdcr_el2(vcpu);
}
/*
@@ -291,6 +277,7 @@ void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu)
return;
vcpu->arch.debug_owner = VCPU_DEBUG_GUEST_OWNED;
+ kvm_arm_setup_mdcr_el2(vcpu);
}
void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val)
--
2.39.5
next prev parent reply other threads:[~2024-12-19 22:41 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 22:40 [PATCH v4 00/19] KVM: arm64: Debug cleanups Oliver Upton
2024-12-19 22:40 ` [PATCH v4 01/19] KVM: arm64: Drop MDSCR_EL1_DEBUG_MASK Oliver Upton
2024-12-19 22:40 ` [PATCH v4 02/19] KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts Oliver Upton
2024-12-19 22:41 ` [PATCH v4 03/19] KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of vCPU Oliver Upton
2024-12-19 22:41 ` [PATCH v4 04/19] KVM: arm64: Move host SME/SVE tracking flags to host data Oliver Upton
2024-12-19 22:41 ` [PATCH v4 05/19] KVM: arm64: Write MDCR_EL2 directly from kvm_arm_setup_mdcr_el2() Oliver Upton
2024-12-19 22:41 ` [PATCH v4 06/19] KVM: arm64: Evaluate debug owner at vcpu_load() Oliver Upton
2024-12-19 22:41 ` [PATCH v4 07/19] KVM: arm64: Clean up KVM_SET_GUEST_DEBUG handler Oliver Upton
2024-12-19 22:41 ` [PATCH v4 08/19] KVM: arm64: Select debug state to save/restore based on debug owner Oliver Upton
2024-12-19 22:41 ` [PATCH v4 09/19] KVM: arm64: Remove debug tracepoints Oliver Upton
2024-12-19 22:41 ` [PATCH v4 10/19] KVM: arm64: Remove vestiges of debug_ptr Oliver Upton
2024-12-19 22:41 ` [PATCH v4 11/19] KVM: arm64: Use debug_owner to track if debug regs need save/restore Oliver Upton
2025-01-31 0:22 ` Mark Brown
2025-01-31 22:32 ` Oliver Upton
2024-12-19 22:41 ` [PATCH v4 12/19] KVM: arm64: Reload vCPU for accesses to OSLAR_EL1 Oliver Upton
2024-12-19 22:41 ` Oliver Upton [this message]
2024-12-19 22:41 ` [PATCH v4 14/19] KVM: arm64: Don't hijack guest context MDSCR_EL1 Oliver Upton
2024-12-19 22:41 ` [PATCH v4 15/19] KVM: arm64: Manage software step state at load/put Oliver Upton
2024-12-19 22:41 ` [PATCH v4 16/19] KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions Oliver Upton
2024-12-19 22:41 ` [PATCH v4 17/19] KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore Oliver Upton
2024-12-19 22:41 ` [PATCH v4 18/19] KVM: arm64: Fold DBGxVR/DBGxCR accessors into common set Oliver Upton
2024-12-19 22:41 ` [PATCH v4 19/19] KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads Oliver Upton
2024-12-20 9:28 ` [PATCH v4 00/19] KVM: arm64: Debug cleanups Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241219224116.3941496-14-oliver.upton@linux.dev \
--to=oliver.upton@linux.dev \
--cc=coltonlewis@google.com \
--cc=james.clark@linaro.org \
--cc=joey.gouly@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=maz@kernel.org \
--cc=mizhang@google.com \
--cc=rananta@google.com \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox