Linux KVM/arm64 development list
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Vincent Donnefort" <vdonnefort@google.com>
Cc: kvmarm@lists.linux.dev, "Marc Zyngier" <maz@kernel.org>,
	"Oliver Upton" <oupton@kernel.org>
Subject: Re: [PATCH v3 4/4] KVM: arm64: Add hyp_printk event to nVHE/pKVM hyp
Date: Wed, 30 Sep 2026 15:56:55 +0000	[thread overview]
Message-ID: <20260930155655.8E63E1F0089C@smtp.kernel.org> (raw)
In-Reply-To: <20260930153505.2144559-5-vdonnefort@google.com>

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] trace: trace_hyp_printk calculates invalid ring_buffer_event pointer causing memory corruption
- [Medium] trace: trace_hyp_printk lacks compile-time format string validation
- [Medium] trace: trace_hyp_printk macro shadows caller variables named fmt
--

commit 26cdec70ff2d60c665c546592ecab1e31f40820e
Author: Vincent Donnefort <vdonnefort@google.com>

KVM: arm64: Add hyp_printk event to nVHE/pKVM hyp

Create an event to allow developers to log pretty much anything into the
hypervisor tracing buffer with trace_hyp_printk(), just like the kernel
tracing has the function trace_printk().

> diff --git a/arch/arm64/kvm/hyp/include/nvhe/trace.h b/arch/arm64/kvm/hyp/include/nvhe/trace.h
> index 8813ff250f8e0..3d0b5c634bb3f 100644
> --- a/arch/arm64/kvm/hyp/include/nvhe/trace.h
> +++ b/arch/arm64/kvm/hyp/include/nvhe/trace.h
[ ... ]
> +
> +#define trace_hyp_printk(__fmt, __args...)						\
> +do {											\
> +	static struct hyp_string_fmt __used __section("_hyp_string_fmts") fmt = {	\

[Severity: Medium]
Will this shadow caller variables named fmt? If a caller passes a local
variable named fmt as one of the format arguments, it seems it would resolve
to this static struct instead of the intended variable, logging the struct
address or causing a compilation error.

[Severity: Medium]
Does this macro validate the format string at compile time?

Since __trace_hyp_printk() does not use a __printf compiler attribute, passing
unsupported specifiers like %s or %p, or providing mismatched arguments, won't
trigger a compiler warning. This could cause a host panic when
trace_seq_printf() attempts to dereference an EL2 pointer at runtime.

> +		.fmt = __fmt								\
> +	};										\
> +	BUILD_BUG_ON(sizeof(__fmt) > HYP_STRING_FMT_MAX_SIZE);				\
> +	/* __TO_U64 prepends a comma if there are arguments */				\
> +	__trace_hyp_printk(&fmt, COUNT_ARGS(__args) __TO_U64(__args));			\
> +} while (0)
>  
>  int __tracing_load(unsigned long desc_va, size_t desc_size);
[ ... ]
> diff --git a/arch/arm64/kvm/hyp_trace.c b/arch/arm64/kvm/hyp_trace.c
> index 8faaec899f92c..9d4378bcad74b 100644
> --- a/arch/arm64/kvm/hyp_trace.c
> +++ b/arch/arm64/kvm/hyp_trace.c
[ ... ]
> @@ -421,6 +424,61 @@ static const char *__hyp_enter_exit_reason_str(u8 reason)
>  	return strs[min(reason, HYP_REASON_UNKNOWN)];
>  }
>  
> +static void __hyp_trace_printk(struct remote_event_format_hyp_printk *entry, struct trace_seq *seq)
> +{
> +	const char *fmt = (const char *)(&__hyp_string_fmts_start[entry->fmt_id]);
> +	struct ring_buffer_event *evt = (void *)entry - RB_EVNT_HDR_SIZE;

[Severity: High]
Does this pointer arithmetic correctly locate the event header?

Since this event is allocated by simple_ring_buffer_reserve(), the payload
starts at array[1] (offset 8) rather than immediately after a standard ring
buffer header. Subtracting RB_EVNT_HDR_SIZE (4 bytes) appears to result in a
misaligned pointer pointing to array[0] instead of the event header.

> +	int nr_args;
> +
> +	trace_seq_putc(seq, ' ');
> +
> +	if ((void *)fmt >= (void *)__hyp_string_fmts_end) {
> +		trace_seq_printf(seq, "Unknown hyp_string_fmt ID %d\n", entry->fmt_id);
> +		return;
> +	}
> +
> +	nr_args = (ring_buffer_event_length(evt) -
> +		   offsetof(struct remote_event_format_hyp_printk, args)) / sizeof(entry->args[0]);

[Severity: High]
Does ring_buffer_event_length() read garbage data here?

If the evt pointer is misaligned, interpreting the payload data as the event
header could yield a garbage nr_args value. This could lead to out-of-bounds
memory reads or information leaks of uninitialized host stack/registers when
trace_seq_printf() is called below.

> +	switch (nr_args) {
> +	case 0:
> +		trace_seq_printf(seq, fmt);
> +		break;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260930153505.2144559-1-vdonnefort@google.com?part=4

  reply	other threads:[~2026-09-30 15:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-30 15:35 [PATCH v3 0/4] trace_hyp_printk() for pKVM/nVHE hypervisor Vincent Donnefort
2026-09-30 15:35 ` [PATCH v3 1/4] KVM: arm64: Allow early calls to pKVM host_share/unshare_hyp Vincent Donnefort
2026-09-30 15:35 ` [PATCH v3 2/4] KVM: arm64: Move kvm_define_hypevents.h to arch/arm64/kvm/ Vincent Donnefort
2026-09-30 15:35 ` [PATCH v3 3/4] tracing/remotes: Add REMOTE_EVENT_CUSTOM_PRINTK() helper Vincent Donnefort
2026-09-30 15:44   ` sashiko-bot
2026-09-30 15:35 ` [PATCH v3 4/4] KVM: arm64: Add hyp_printk event to nVHE/pKVM hyp Vincent Donnefort
2026-09-30 15:56   ` sashiko-bot [this message]
2026-10-01  7:05     ` Vincent Donnefort

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260930155655.8E63E1F0089C@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=maz@kernel.org \
    --cc=oupton@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=vdonnefort@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox