Linux KVM/arm64 development list
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Vladimir Murzin <vladimir.murzin@arm.com>, kvmarm@lists.cs.columbia.edu
Cc: andre.przywara@arm.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 5/8] KVM: arm: vgic: Support 64-bit data manipulation on 32-bit host systems
Date: Fri, 9 Sep 2016 17:55:07 +0100	[thread overview]
Message-ID: <57D2E96B.70909@arm.com> (raw)
In-Reply-To: <1473350810-10857-6-git-send-email-vladimir.murzin@arm.com>

On 08/09/16 17:06, Vladimir Murzin wrote:
> We have couple of 64-bit registers defined in GICv3 architecture, so
> unsigned long accesses to these registers will only access a single
> 32-bit part of that regitser. On the other hand these registers can't
> be accessed as 64-bit with a single instruction like ldrd/strd or
> ldmia/stmia if we run a 32-bit host because KVM does not support
> access to MMIO space done by these instructions.
> 
> It means that a 32-bit guest accesses these registers in 32-bit
> chunks, so the only thing we need to do is to ensure that
> extract_bytes() always takes 64-bit data.
> 
> Since we are here fix couple of other width related issues catched by
> gcc
> 
> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
> ---
>  virt/kvm/arm/vgic/vgic-mmio-v3.c |    6 +++---
>  virt/kvm/arm/vgic/vgic-mmio.h    |    2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
> index acbe691..0d3c76a 100644
> --- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
> +++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
> @@ -23,7 +23,7 @@
>  #include "vgic-mmio.h"
>  
>  /* extract @num bytes at @offset bytes offset in data */
> -unsigned long extract_bytes(unsigned long data, unsigned int offset,
> +unsigned long extract_bytes(u64 data, unsigned int offset,
>  			    unsigned int num)
>  {
>  	return (data >> (offset * 8)) & GENMASK_ULL(num * 8 - 1, 0);
> @@ -181,7 +181,7 @@ static unsigned long vgic_mmio_read_v3r_typer(struct kvm_vcpu *vcpu,
>  	int target_vcpu_id = vcpu->vcpu_id;
>  	u64 value;
>  
> -	value = (mpidr & GENMASK(23, 0)) << 32;
> +	value = (u64)(mpidr & GENMASK(23, 0)) << 32;
>  	value |= ((target_vcpu_id & 0xffff) << 8);
>  	if (target_vcpu_id == atomic_read(&vcpu->kvm->online_vcpus) - 1)
>  		value |= GICR_TYPER_LAST;
> @@ -611,7 +611,7 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg)
>  	bool broadcast;
>  
>  	sgi = (reg & ICC_SGI1R_SGI_ID_MASK) >> ICC_SGI1R_SGI_ID_SHIFT;
> -	broadcast = reg & BIT(ICC_SGI1R_IRQ_ROUTING_MODE_BIT);
> +	broadcast = reg & BIT_ULL(ICC_SGI1R_IRQ_ROUTING_MODE_BIT);
>  	target_cpus = (reg & ICC_SGI1R_TARGET_LIST_MASK) >> ICC_SGI1R_TARGET_LIST_SHIFT;
>  	mpidr = SGI_AFFINITY_LEVEL(reg, 3);
>  	mpidr |= SGI_AFFINITY_LEVEL(reg, 2);
> diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h
> index 0b3ecf9..80f92ce 100644
> --- a/virt/kvm/arm/vgic/vgic-mmio.h
> +++ b/virt/kvm/arm/vgic/vgic-mmio.h
> @@ -96,7 +96,7 @@ unsigned long vgic_data_mmio_bus_to_host(const void *val, unsigned int len);
>  void vgic_data_host_to_mmio_bus(void *buf, unsigned int len,
>  				unsigned long data);
>  
> -unsigned long extract_bytes(unsigned long data, unsigned int offset,
> +unsigned long extract_bytes(u64 data, unsigned int offset,
>  			    unsigned int num);
>  
>  u64 update_64bit_reg(u64 reg, unsigned int offset, unsigned int len,
> 

My personal preference would be to split this in two patches. One that
changes extract_bytes to work on 64bit quantities, and another one that
addresses the 64bit issues. Not a big deal though.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2016-09-09 16:46 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-08 16:06 [PATCH v3 0/8] ARM: KVM: Support for vgic-v3 Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 1/8] arm64: KVM: Use static keys for selecting the GIC backend Vladimir Murzin
2016-09-09  9:19   ` Marc Zyngier
2016-09-09  9:33     ` Vladimir Murzin
2016-09-09 13:45       ` Vladimir Murzin
2016-09-09 14:17         ` Marc Zyngier
2016-09-09 15:14           ` Vladimir Murzin
2016-09-09 15:25             ` Marc Zyngier
2016-09-09 16:18               ` Vladimir Murzin
2016-09-09 17:06                 ` Marc Zyngier
2016-09-08 16:06 ` [PATCH v3 2/8] arm64: KVM: Move GIC accessors to arch_gicv3.h Vladimir Murzin
2016-09-09 16:32   ` Marc Zyngier
2016-09-12  9:18     ` Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 3/8] arm64: KVM: Move vgic-v3 save/restore to virt/kvm/arm/hyp Vladimir Murzin
2016-09-09 16:33   ` Marc Zyngier
2016-09-12  9:18     ` Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 4/8] KVM: arm64: vgic-its: Introduce config option to guard ITS specific code Vladimir Murzin
2016-09-09 16:46   ` Marc Zyngier
2016-09-12  9:23     ` Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 5/8] KVM: arm: vgic: Support 64-bit data manipulation on 32-bit host systems Vladimir Murzin
2016-09-09 16:55   ` Marc Zyngier [this message]
2016-09-12  9:25     ` Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 6/8] ARM: Change MPIDR_AFFINITY_LEVEL to ignore Aff3 Vladimir Murzin
2016-09-09 16:59   ` Marc Zyngier
2016-09-12  9:39     ` Vladimir Murzin
2016-09-12  9:48       ` Marc Zyngier
2016-09-12  9:51         ` Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 7/8] ARM: Move system register accessors to asm/cp15.h Vladimir Murzin
2016-09-09 17:05   ` Marc Zyngier
2016-09-12  9:42     ` Vladimir Murzin
2016-09-12  9:44     ` Vladimir Murzin
2016-09-08 16:06 ` [PATCH v3 8/8] ARM: KVM: Support vgic-v3 Vladimir Murzin
2016-09-09 16:45   ` Marc Zyngier
2016-09-12  9:23     ` Vladimir Murzin
2016-09-09  7:58 ` [PATCH v3 0/8] ARM: KVM: Support for vgic-v3 Vladimir Murzin
2016-09-09 11:26   ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57D2E96B.70909@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=vladimir.murzin@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox