From: Auger Eric <eric.auger@redhat.com>
To: Christoffer Dall <christoffer.dall@arm.com>
Cc: eric.auger.pro@gmail.com, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
marc.zyngier@arm.com, cdall@kernel.org, peter.maydell@linaro.org,
andre.przywara@arm.com, drjones@redhat.com, wei@redhat.com
Subject: Re: [PATCH v3 06/12] KVM: arm/arm64: Helper to register a new redistributor region
Date: Thu, 26 Apr 2018 09:32:49 +0200 [thread overview]
Message-ID: <8ad17ccb-9880-ca67-8ed8-25fb9557942c@redhat.com> (raw)
In-Reply-To: <20180424164712.GB4533@C02W217FHV2R.local>
Hi Christoffer,
On 04/24/2018 06:47 PM, Christoffer Dall wrote:
> On Fri, Apr 13, 2018 at 10:20:52AM +0200, Eric Auger wrote:
>> We introduce a new helper that creates and inserts a new redistributor
>> region into the rdist region list. This helper both handles the case
>> where the redistributor region size is known at registration time
>> and the legacy case where it is not (eventually depending on the number
>> of online vcpus). Depending on pfns, we perform all the possible checks
>> that we can do:
>>
>> - end of memory crossing
>> - incorrect alignment of the base address
>> - collision with distributor region if already defined
>> - collision with already registered rdist regions
>> - check of the new index
>>
>> Rdist regions must be inserted by increasing order of indices. Indices
>> must be contiguous.
>>
>> We also introduce vgic_v3_rdist_region_from_index() which will be used
>> from the vgic kvm-device, later on.
>>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>> ---
>> | 95 +++++++++++++++++++++++++++++++++-------
>> virt/kvm/arm/vgic/vgic-v3.c | 29 ++++++++++++
>> virt/kvm/arm/vgic/vgic.h | 14 ++++++
>> 3 files changed, 122 insertions(+), 16 deletions(-)
>>
>> diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
>> index ce5c927..5273fb8 100644
>> --- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
>> +++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
>> @@ -680,14 +680,66 @@ static int vgic_register_all_redist_iodevs(struct kvm *kvm)
>> return ret;
>> }
>>
>> -int vgic_v3_set_redist_base(struct kvm *kvm, u64 addr)
>> +/**
>> + * vgic_v3_insert_redist_region - Insert a new redistributor region
>> + *
>> + * Performs various checks before inserting the rdist region in the list.
>> + * Those tests depend on whether the size of the rdist region is known
>> + * (ie. count != 0). The list is sorted by rdist region index.
>> + *
>> + * @kvm: kvm handle
>> + * @index: redist region index
>> + * @base: base of the new rdist region
>> + * @count: number of redistributors the region is made of (of 0 in the old style
>> + * single region, whose size is induced from the number of vcpus)
>> + *
>> + * Return 0 on success, < 0 otherwise
>> + */
>> +static int vgic_v3_insert_redist_region(struct kvm *kvm, uint32_t index,
>> + gpa_t base, uint32_t count)
>> {
>> - struct vgic_dist *vgic = &kvm->arch.vgic;
>> + struct vgic_dist *d = &kvm->arch.vgic;
>> struct vgic_redist_region *rdreg;
>> + struct list_head *rd_regions = &d->rd_regions;
>> + struct list_head *last = rd_regions->prev;
>> +
>
> nit: extra blank line?
>
>> + gpa_t new_start, new_end;
>> + size_t size = count * KVM_VGIC_V3_REDIST_SIZE;
>> int ret;
>>
>> - /* vgic_check_ioaddr makes sure we don't do this twice */
>> - if (!list_empty(&vgic->rd_regions))
>> + /* single rdist region already set ?*/
>> + if (!count && !list_empty(rd_regions))
>> + return -EINVAL;
>> +
>> + /* cross the end of memory ? */
>> + if (base + size < base)
>> + return -EINVAL;
>
> what is the size of memory? This seems to check for a gpa_t overflow,
> but not againt the IPA space of the VM...
Yes it checks for a gpa_t overflow. This check is currently done in
vgic_v3_check_base() for dist and redist region and I replicated it.
>
>> +
>> + if (list_empty(rd_regions)) {
>> + if (index != 0)
>> + return -EINVAL;
>
> note, I think this can be simplified if we can rid of the index.
So I eventually keep the index.
>
>> + } else {
>> + rdreg = list_entry(last, struct vgic_redist_region, list);
>
> you can use list_last_entry here and get rid of the 'last' temporary
> variable above.
definitively, thank you for the nit.
>
>> + if (index != rdreg->index + 1)
>> + return -EINVAL;
>> +
>> + /* Cannot add an explicitly sized regions after legacy region */
>> + if (!rdreg->count)
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * collision with already set dist region ?
>> + * this assumes we know the size of the new rdist region (pfns != 0)
>> + * otherwise we can only test this when all vcpus are registered
>> + */
>
> I don't really understand this commentary... :(
I meant we cannot perform the check below if we are inserting a unique
legacy rdist region (old API), whose size is not explicitly set but
induced from the number of online vcpus.
>
>> + if (!count && !IS_VGIC_ADDR_UNDEF(d->vgic_dist_base) &&
>> + (!(d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE <= base)) &&
>> + (!(base + size <= d->vgic_dist_base)))
>> + return -EINVAL;
>
> Can't you call vgic_v3_check_base() here instead?
no I can't because vgic_v3_check_base() currently only works with the
unique legacy rdist region. There, redist_size is
atomic_read(&kvm->online_vcpus) * KVM_VGIC_V3_REDIST_SIZE.
>
>> +
>> + /* collision with any other rdist region? */
>> + if (vgic_v3_rdist_overlap(kvm, base, size))
>> return -EINVAL;
>>
>> rdreg = kzalloc(sizeof(*rdreg), GFP_KERNEL);
>> @@ -696,17 +748,32 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u64 addr)
>>
>> rdreg->base = VGIC_ADDR_UNDEF;
>>
>> - ret = vgic_check_ioaddr(kvm, &rdreg->base, addr, SZ_64K);
>> + ret = vgic_check_ioaddr(kvm, &rdreg->base, base, SZ_64K);
>> if (ret)
>> - goto out;
>> + goto free;
>>
>> - rdreg->base = addr;
>> - if (!vgic_v3_check_base(kvm)) {
>> - ret = -EINVAL;
>> - goto out;
>> - }
>> + rdreg->base = base;
>> + rdreg->count = count;
>> + rdreg->free_index = 0;
>> + rdreg->index = index;
>>
>> - list_add(&rdreg->list, &vgic->rd_regions);
>> + new_start = base;
>> + new_end = base + size - 1;
>
> What are these variables used for?
Hum reminder from an old version :-(
>
>> +
>> + list_add_tail(&rdreg->list, rd_regions);
>> + return 0;
>> +free:
>> + kfree(rdreg);
>> + return ret;
>> +}
>> +
>> +int vgic_v3_set_redist_base(struct kvm *kvm, u64 addr)
>> +{
>> + int ret;
>> +
>> + ret = vgic_v3_insert_redist_region(kvm, 0, addr, 0);
>> + if (ret)
>> + return ret;
>>
>> /*
>> * Register iodevs for each existing VCPU. Adding more VCPUs
>> @@ -717,10 +784,6 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u64 addr)
>> return ret;
>>
>> return 0;
>> -
>> -out:
>> - kfree(rdreg);
>> - return ret;
>> }
>>
>> int vgic_v3_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
>> diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
>> index 820012a..dbcba5f 100644
>> --- a/virt/kvm/arm/vgic/vgic-v3.c
>> +++ b/virt/kvm/arm/vgic/vgic-v3.c
>> @@ -410,6 +410,21 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
>> return 0;
>> }
>>
>> +/* return true if there is an overlap between any rdist */
>
> Checks if base+size overlaps with any existing redistributor.
>
>> +bool vgic_v3_rdist_overlap(struct kvm *kvm, gpa_t base, size_t size)
>> +{
>> + struct vgic_dist *d = &kvm->arch.vgic;
>> + struct vgic_redist_region *rdreg;
>> +
>> + list_for_each_entry(rdreg, &d->rd_regions, list) {
>> + if ((base + size <= rdreg->base) ||
>> + (rdreg->base + vgic_v3_rd_region_size(kvm, rdreg) <= base))
>> + continue;
>> + return true;
>
> can you invert the check above and return false instead of the continue?
>
> (DeMorgan's law should be handy here.)
sure
>
>> + }
>> + return false;
>> +}
>> +
>> /*
>> * Check for overlapping regions and for regions crossing the end of memory
>> * for base addresses which have already been set.
>> @@ -461,6 +476,20 @@ struct vgic_redist_region *vgic_v3_rdist_free_slot(struct list_head *rd_regions)
>> return NULL;
>> }
>>
>> +struct vgic_redist_region *vgic_v3_rdist_region_from_index(struct kvm *kvm,
>> + uint32_t index)
>> +{
>> + struct list_head *rd_regions = &kvm->arch.vgic.rd_regions;
>> + struct vgic_redist_region *rdreg;
>> +
>> + list_for_each_entry(rdreg, rd_regions, list) {
>> + if (rdreg->index == index)
>> + return rdreg;
>> + }
>
> if this ends up being a common operation, we could allocate an array of
> pointers for constant-time lookup instead. Let's hope it's not too
> common.
This is only used when reading the characteristics of a redist region
from userspace so I don't think we care.
Thanks
Eric
>
>> + return NULL;
>> +}
>> +
>> +
>> int vgic_v3_map_resources(struct kvm *kvm)
>> {
>> int ret = 0;
>> diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
>> index fea32cb..95b8345 100644
>> --- a/virt/kvm/arm/vgic/vgic.h
>> +++ b/virt/kvm/arm/vgic/vgic.h
>> @@ -262,6 +262,20 @@ vgic_v3_redist_region_full(struct vgic_redist_region *region)
>>
>> struct vgic_redist_region *vgic_v3_rdist_free_slot(struct list_head *rdregs);
>>
>> +static inline size_t
>> +vgic_v3_rd_region_size(struct kvm *kvm, struct vgic_redist_region *rdreg)
>> +{
>> + if (!rdreg->count)
>> + return atomic_read(&kvm->online_vcpus) * KVM_VGIC_V3_REDIST_SIZE;
>> + else
>> + return rdreg->count * KVM_VGIC_V3_REDIST_SIZE;
>> +}
>> +
>> +struct vgic_redist_region *vgic_v3_rdist_region_from_index(struct kvm *kvm,
>> + uint32_t index);
>> +
>> +bool vgic_v3_rdist_overlap(struct kvm *kvm, gpa_t base, size_t size);
>> +
>> int vgic_its_resolve_lpi(struct kvm *kvm, struct vgic_its *its,
>> u32 devid, u32 eventid, struct vgic_irq **irq);
>> struct vgic_its *vgic_msi_to_its(struct kvm *kvm, struct kvm_msi *msi);
>> --
>> 2.5.5
>>
>
> Thanks,
> -Christoffer
>
next prev parent reply other threads:[~2018-04-26 7:32 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-13 8:20 [PATCH v3 00/12] KVM: arm/arm64: Allow multiple GICv3 redistributor regions Eric Auger
2018-04-13 8:20 ` [PATCH v3 01/12] KVM: arm/arm64: Set dist->spis to NULL after kfree Eric Auger
2018-04-24 21:06 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 02/12] KVM: arm/arm64: Document KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION Eric Auger
2018-04-13 9:00 ` Peter Maydell
2018-04-24 16:46 ` Christoffer Dall
2018-04-24 16:50 ` Peter Maydell
2018-04-24 20:34 ` Auger Eric
2018-04-24 21:12 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 03/12] KVM: arm/arm64: Replace the single rdist region by a list Eric Auger
2018-04-24 21:06 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 04/12] KVM: arm/arm64: Helper to locate free rdist index Eric Auger
2018-04-24 21:07 ` Christoffer Dall
2018-04-26 7:47 ` Auger Eric
2018-04-13 8:20 ` [PATCH v3 05/12] KVM: arm/arm64: Revisit Redistributor TYPER last bit computation Eric Auger
2018-04-24 21:06 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 06/12] KVM: arm/arm64: Helper to register a new redistributor region Eric Auger
2018-04-24 16:47 ` Christoffer Dall
2018-04-26 7:32 ` Auger Eric [this message]
2018-04-26 10:04 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 07/12] KVM: arm/arm64: Adapt vgic_v3_check_base to multiple rdist regions Eric Auger
2018-04-24 21:07 ` Christoffer Dall
2018-04-26 8:29 ` Auger Eric
2018-04-26 10:06 ` Christoffer Dall
2018-04-26 14:52 ` Auger Eric
2018-04-13 8:20 ` [PATCH v3 08/12] KVM: arm/arm64: Check vcpu redist base before registering an iodev Eric Auger
2018-04-24 21:07 ` Christoffer Dall
2018-04-26 9:25 ` Auger Eric
2018-04-26 10:12 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 09/12] KVM: arm/arm64: Check all vcpu redistributors are set on map_resources Eric Auger
2018-04-24 21:08 ` Christoffer Dall
2018-04-26 9:56 ` Auger Eric
2018-04-26 10:16 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 10/12] KVM: arm/arm64: Add KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION Eric Auger
2018-04-24 21:08 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 11/12] KVM: arm/arm64: Implement KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION Eric Auger
2018-04-24 21:06 ` Christoffer Dall
2018-04-30 7:25 ` Auger Eric
2018-04-27 19:14 ` Christoffer Dall
2018-04-13 8:20 ` [PATCH v3 12/12] KVM: arm/arm64: Bump VGIC_V3_MAX_CPUS to 512 Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8ad17ccb-9880-ca67-8ed8-25fb9557942c@redhat.com \
--to=eric.auger@redhat.com \
--cc=andre.przywara@arm.com \
--cc=cdall@kernel.org \
--cc=christoffer.dall@arm.com \
--cc=drjones@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=peter.maydell@linaro.org \
--cc=wei@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox