Re: [LARTC] RE: Promisc routing

["Roy" <roy@xxx.lt>]

Thanks,

but I I already found iptables promic chain patch.
Probably it will by  a bit simpler to use, and will  less space.
( need this for LinuxAP which ROM is only 1MB)

Probably I will install ebtables on my server.

By default linux aready have about as many limitations as windows.



----- Original Message ----- 
From: "Bart De Schuymer" <bdschuym@pandora.be>
To: "Sumit Pandya" <sumit@elitecore.com>; <lartc@mailman.ds9a.nl>
Cc: <roy@xxx.lt>
Sent: Saturday, August 28, 2004 12:12 PM
Subject: Re: [LARTC] RE: Promisc routing


> On Saturday 28 August 2004 09:16, Sumit Pandya wrote:
> > > From: '"'Roy'"' <roy@xxx.lt>
> > >
> > > I want to set interface to promisc mode and do all routing
> with iptables.
> > > Is it somehow possible? as I see now kernel do not pass
> everything to
> > > ipables.
> > >
> > > Basicaly I want to ignore ethernet addess and use only ip
> for routing.
> > >
> > > I suppose this may require writting special kernel driver
> or it
> > > is possible
> > > in other way?
> >
> > Probably you need only a kernel patched with ebtables/br-nf
> and use
> > iptables extensions ROUTE, TTL/ttl, TOS/tos, MARK/mark,
> multiport, mport,
> > etc.
> 
> See http://ebtables.sourceforge.net/examples.html#easy '"'Making a
> brouter'"' and 
> '"'Using the redirect target'"'.
> 
> cheers,
> Bart
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> 
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/