From: "Simo" <simo@mix4web.de>
To: lartc@vger.kernel.org
Subject: AW: [LARTC] Traffic Shaping
Date: Mon, 07 May 2007 08:25:23 +0000 [thread overview]
Message-ID: <001a01c79081$426366a0$c72a33e0$@de> (raw)
In-Reply-To: <marc-lartc-98373940416818@msgid-missing>
[-- Attachment #1.1: Type: text/plain, Size: 2121 bytes --]
Hi Rangi,
Bandwidth ist important, but VoIP needs more than this. Voice traffic needs
low latency of packets. That's why traffic shaping maybe not lose your
problem.
in this a HFCS queuing descipline is used instead of HTB, because this can
separate between bandwidth and delay. For more Information about this can
you find here: http://linux-ip.net/articles/hfsc.en/
bye
Simo
Von: lartc-bounces@mailman.ds9a.nl [mailto:lartc-bounces@mailman.ds9a.nl] Im
Auftrag von Rangi Biddle
Gesendet: Sonntag, 6. Mai 2007 22:15
An: lartc@mailman.ds9a.nl
Betreff: [LARTC] Traffic Shaping
Dear List,
I am wanting to perform some traffic shaping as the subject of this email
suggests.
What I am wanting to do is this; I would like to have traffic shaping
performed on the following protocols: HTTP, RDP, GRE, PPTP, SIP and IAX.
Obviously I would like to have highest priority set for voice packets so
much so that the general http traffic does not impede on the voice packets.
I would like to have ample bandwidth available for RDP so that I am able to
connect to a remote site and not have too much lag but ample enough that
most tasks can be done. HTTP traffic would possibly have the lowest
priority of all the protocols that I have listed. So to clarify priority
would be something such as this:
1. IAX
2. SIP
3. GRE
4. PPTP
5. RDP
6. HTTP
I have a linux gateway that I will use for performing the traffic shaping
and is setup in the following way:
------------- ------------
---------
| ADSL | <----------> | LINUX | <----------> |
LAN |
------------- ------------
---------
I plan to have the ADSL router forward all traffic to the linux gateway
using something similar to a BIMAP rule where all incoming and outgoing
traffic is made to appear to come from the public IP address. I welcome any
and all suggestions but would possibly prefer the most elegant of solutions
J
Many thanks in advance
Rangi
[-- Attachment #1.2: Type: text/html, Size: 10768 bytes --]
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
next prev parent reply other threads:[~2007-05-07 8:25 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-04 12:22 [LARTC] traffic shaping Wouter
2001-01-04 18:17 ` Sander
2001-01-05 3:52 ` Sander
2001-01-05 11:42 ` Wouter
2001-01-05 13:56 ` Junus
2001-01-05 13:56 ` Junus
2001-01-06 9:25 ` [LARTC] Traffic shaping Bruno
2001-01-07 13:54 ` Junus
2001-12-25 12:15 ` [LARTC] Traffic Shaping Sahil Gupta - NET4U
2001-12-25 12:27 ` bert hubert
2001-12-25 12:33 ` Sahil Gupta - NET4U
2001-12-25 12:34 ` Sahil Gupta - NET4U
2001-12-25 12:42 ` bert hubert
2002-01-22 4:52 ` [LARTC] traffic shaping Antonis Lazaridis
2002-01-22 7:44 ` Martin Devera
2002-01-23 8:23 ` Martin Devera
2002-01-23 9:42 ` Antonis Lazaridis
2002-01-23 9:51 ` Martin Devera
2002-01-25 8:11 ` Antonis Lazaridis
2002-01-26 23:00 ` Martin Devera
2002-01-27 1:21 ` Re[2]: " Will Lotto
2002-01-27 8:47 ` Stef Coene
2002-02-08 5:17 ` Antonis Lazaridis
2002-02-08 17:22 ` Riaz Mahmood
2006-10-04 20:45 ` Roberto Scattini
2007-05-06 20:14 ` [LARTC] Traffic Shaping Rangi Biddle
2007-05-07 8:25 ` Simo [this message]
2007-05-07 18:06 ` Rangi Biddle
2007-05-08 3:16 ` Rangi Biddle
2007-10-24 18:37 ` [LARTC] Traffic shaping Mohammad Shakir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001a01c79081$426366a0$c72a33e0$@de' \
--to=simo@mix4web.de \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox