From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Chris Bolton" Date: Tue, 13 Jan 2004 10:05:10 +0000 Subject: [LARTC] simple(?!?) source routing Message-Id: <003101c3d9bc$bb8795d0$0b00000a@Server2.hd> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_002E_01C3D9BC.BACA8760" List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_002E_01C3D9BC.BACA8760 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I've set up a Linux box with redhat on to act as an internet gateway and = I'm running into a few problems. Its got two adsl modems connected to = it, both connected to seperate 512kbs lines. Now I've followed the = simple source routing in the advanced routing howto to the letter but it = doesnt work. I've got it autoconnecting on startup and redhat puts ppp1 as the = default gateway, this is then setup for masquerading for the entire = network. Therefore I've tried setting up ppp0 as the deafult gateway = for only one computer (10.0.0.11), as it says at = http://lartc.org/howto/lartc.rpdb.html#LARTC.RPDB.SIMPLE I've done = everything it says there and im 99% sure I've put the right ip addreses = in etc. When Ive gone through it that computer is no longer able to = access the net (the rest of the network is unaffected). I'm pretty sure its the way ppp0 is configured, if I set it up so = 10.0.0.11 uses ppp1 instead of ppp0 (ip rule add default via = xxx.xxx.xxx.xxx dev ppp1 table chris) it works fine but obviously thers = no point in that. Hope all this makes sence to someone, it baerly does ti me. May thanks = in advance. Chris ------=_NextPart_000_002E_01C3D9BC.BACA8760 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hi,

I've set up a Linux box with = redhat on to act=20 as an internet gateway and I'm running into a few problems. Its = got two=20 adsl modems connected to it, both connected to seperate 512kbs = lines. Now=20 I've followed the simple source routing in the advanced routing howto to = the=20 letter but it doesnt work.

I've got it autoconnecting on startup = and redhat=20 puts ppp1 as the default gateway, this is then setup for masquerading = for the=20 entire network. Therefore I've tried setting up ppp0 as the = deafult=20 gateway for only one computer (10.0.0.11), as it says at http://= lartc.org/howto/lartc.rpdb.html#LARTC.RPDB.SIMPLE I've=20 done everything it says there and im 99% sure I've put the right ip = addreses in=20 etc. When Ive gone through it that computer is no longer able to = access=20 the net (the rest of the network is unaffected).

I'm pretty sure its the way ppp0 is = configured, if=20 I set it up so 10.0.0.11 uses ppp1 instead of ppp0 (ip = rule add=20 default via xxx.xxx.xxx.xxx dev ppp1 table chris) it works fine but = obviously thers no point in that.

Hope all this makes sence to someone, = it baerly=20 does ti me. May thanks in advance.

Chris

------=_NextPart_000_002E_01C3D9BC.BACA8760-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/