From: Oscar Mechanic <oscar@ufomechanic.net>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] routing in the same subnet
Date: Fri, 16 Dec 2005 20:10:24 +0000 [thread overview]
Message-ID: <1134763824.8073.67.camel@OSCARLAPLIN> (raw)
In-Reply-To: <43a30e38accb2@wp.pl>
Why would you not just bridge them? Proxy arp I have found to be a pain
and it has caused me more wierd problems with switching loops. Have a
look at brctl and ebtables if fantastic.
On Fri, 2005-12-16 at 20:43 +0100, Andreas Unterkircher wrote:
> Any ugly trick is to active proxy_arp on the interfaces of the router
> (/proc/sys/net/ipv4/conf/*/proxy_arp).
> Then the external interface will scream "i have it!" on all of the arp
> requests for the other ip addresses (as
> soon as the router has the other machines in his arp-table). if you have
> ip_forward enabled and your clients
> using the internal interface address of the router as gateway you have
> what you want.
>
> Adam Gawda schrieb:
> > Hi,
> >
> > I have IP 64.10.12.64/26 (example)
> > and there's gateway 64.10.12.65 and I want doing something like this:
> >
> > -------------------------------------64.10.12.65 GW
> >
> > --------------------------- ROUTER ----------- --------------------clients
> > eth0 64.10.12.66 eth1 64.10.12.66 from 64.10.12.67 to 126
> > 255.255.255.192 255.255.255.192 255.255.255.192
> > GW 64.10.12.65
> >
> > I want have all clients behind router (traffic shaper, firewall , etc). May I do it other method than subneting ? - because now doesn't work
> >
> >
> >
> > ----------------------------------------------------
> > Pamiętaj o wszystkich/ -im w te święta!
> > Zajrzyj na swieta.wp.pl i wygraj aparaty cyfrowe Panasonic!
> > Kliknij: http://klik.wp.pl/?adr=www.swieta.wp.pl&sidY9
> >
> >
> > _______________________________________________
> > LARTC mailing list
> > LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
> >
>
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
prev parent reply other threads:[~2005-12-16 20:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-16 18:58 [LARTC] routing in the same subnet Adam Gawda
2005-12-16 19:43 ` Andreas Unterkircher
2005-12-16 20:10 ` Oscar Mechanic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1134763824.8073.67.camel@OSCARLAPLIN \
--to=oscar@ufomechanic.net \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox