From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Chris Bolton" Date: Tue, 06 Jul 2004 12:54:05 +0000 Subject: FW: FW: [LARTC] Static ip addresses/aliases previously (my mistake) htb: class 10007 isn't work cons Message-Id: <200407061256.i66CuJx62930@smtp.shellnet.co.uk> List-Id: References: <200407051616.i65GGcx94225@smtp.shellnet.co.uk> In-Reply-To: <200407051616.i65GGcx94225@smtp.shellnet.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org >>eth1 & eth2 are both connected to the EN5861 router. I've done that >>because I couldn't work out any other way to use the static IP address >>that out ISP have given us. >> > >Aha, this is a config question. You can just add as many ip addresses to each physical card as you like. I forget the exact syntax, but check man pages for "ifconfig" and look for "aliases". Right getting the hang of this now, managed to set up aliases for eth0 named eth0:0 and eth0:1 with the correct Ip addresses but how can I route with them? When I do something like ip route add default dev eth0:0 it complains that it cant find eth0:0 as its not a real adapter. I've been searching on google to no avail and have come to a bit of a full stop. Cheers. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/