Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Darko <darko@veze.net>
To: lartc@vger.kernel.org
Subject: [LARTC] tc filter AP device
Date: Wed, 31 Oct 2007 19:07:50 +0000	[thread overview]
Message-ID: <200710312106.14518.darko@veze.net> (raw)

Hi, 
trying to set packet classifying on wireless AP device for transfer between 
two wireless clients without success.
It seems that packet allways going thru default class.
Marking packets success only with ebtables+madwifi patch, but appropriate 
filter doesn't react on it. (examined by counter stats of ebtables and tc)
u32 match with ip dst match of one client, and even 0.0.0.0/0 didn't get any 
luck.
My questions are how can I debug process of deciding to which class packet is 
going, could "protocol ip" be responsible for unclassifying packet and is 
there some filter rule which can allways pick packet.

p.s. when source of packet is from other interface it works ok, and with 
tcpdump I can normally see communication between  clients (Ethereal shows 
Ethernet II packet Type IP).

Thanks, Darko


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

                 reply	other threads:[~2007-10-31 19:07 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200710312106.14518.darko@veze.net \
    --to=darko@veze.net \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox