From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jose Araujo <jlaraujo@mercs.homeip.net>
Date: Mon, 01 Mar 2004 22:20:36 +0000
Subject: Re: [LARTC] Filters not working
Message-Id: <4043B734.5090501@mercs.homeip.net>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

Hy.

The solution I am going to give you might seem strange, but it worked=20
with me on a project I'm working and hope to release soon.


Scott Gagon wrote:

>tc class add dev $TC_DEV parent 1: classid 1:1 htb rate ${TC_UPLINK}kbit b=
urst 6k
>
># high prio class 1:10:
>
>tc class add dev $TC_DEV parent 1:1 classid 1:10 htb rate ${TC_UPLINK}kbit=
 burst 6k prio 1
> =20
>
Remove the prio from your class configurations, it seem to cause some=20
strange problems (at least with me, but i can't use the last htb=20
version, mine is 3.1 something, can't check it now).

>Thanks so much!  I have to say, this has been a learning experience! :\
>
Hope it helps.

Jos=E9 Ara=FAjo

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/