From: David McNab <david@rebirthing.co.nz>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] bandwidth limiting per ip/user
Date: Mon, 15 Mar 2004 10:34:56 +0000 [thread overview]
Message-ID: <405586D0.4080209@rebirthing.co.nz> (raw)
In-Reply-To: <bdc5b71c.2166c0a8.99e2500@mail-msgstore01.qut.edu.au>
try pyshaper - http://www.freenet.org.nz/python/pyshaper
Very easy yet very versatile
Josh Beagley wrote:
> Howdy,
>
>
> I have searched and read many other mailing list posts/usenet
> posts etc, however seem unable to find a direct answer for my
> problem....
>
> I have a 2Mbit link network, and was wanting to limit 20 ip
> addresses, in the range x.x.x.20 to x.x.x.40 to downloading
> at 40Kb/sec.
>
> I setup cbq with cbqinit on there, and tried having 2 class
> files, one for external and internal interface, and limiting
> the rate to 400Kbit and the weight to 40, and having a
> RULE=IP for each ip address...., however the machines seem to
> be sharing bandwidth, eg if to start downloading they get
> roughly 25 between them.
>
> I am unable to modify any iptables rules, why that is so is
> not relevant, however I simply do not have the ability to
> play with marking, and need an alternative such as
> rshaper/cbq/wondershaper
>
> I am currently trying to get rshaper working, and am
> wondering if that will work out to be a better solution...eg
> will it work as I am expecting if I use rshaperctl to add a
> rule for each ip?
>
> Otherwise, what other tools/suggestions could be advised?
>
> Many thanks in advance,
> Josh
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
--
Kind regards
David
--
leave this line intact so your email gets through my junk mail filter
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2004-03-15 10:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-15 10:14 [LARTC] bandwidth limiting per ip/user Josh Beagley
2004-03-15 10:34 ` David McNab [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=405586D0.4080209@rebirthing.co.nz \
--to=david@rebirthing.co.nz \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox