Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Debreczeni Peter <dante@tvnet.hu>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Linux vs. Windows XP routing latency
Date: Fri, 04 Jun 2004 14:37:50 +0000	[thread overview]
Message-ID: <40C0893E.2050903@tvnet.hu> (raw)
In-Reply-To: <20040602150137.4746.qmail@hc-online.com.ar>


> From dmesg:
> 
> via-rhine.c:v1.10-LK1.1.17  March-1-2003  Written by Donald Becker
>   http://www.scyld.com/network/via-rhine.html
> eth0: VIA VT6102 Rhine-II at 0xdc00, 00:0a:e6:a1:d9:01, IRQ 5.
> eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
> eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
> 
> What is a duplex mismatch?
> 

when two side of a link use different duplex setting
did you tried with another NIC card , via isn`t a fine
chip i think
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

  parent reply	other threads:[~2004-06-04 14:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-02 15:01 [LARTC] Linux vs. Windows XP routing latency donsapo
2004-06-02 21:36 ` Peter Surda
2004-06-04  8:13 ` donsapo
2004-06-04 14:37 ` Debreczeni Peter [this message]
2004-06-05 13:06 ` Ed Wildgoose
2004-06-07  6:34 ` Ronny Aasen
2004-06-07  7:39 ` Paulo Andre
2004-06-18  0:01 ` Andy Furniss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40C0893E.2050903@tvnet.hu \
    --to=dante@tvnet.hu \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox