From: Matteo Brusa <miagi@tiscali.it>
To: lartc@vger.kernel.org
Subject: [LARTC] Shaping incoming traffic on the other interface
Date: Thu, 10 Jun 2004 12:35:21 +0000 [thread overview]
Message-ID: <40C85589.10907@tiscali.it> (raw)
Hi,
I have a typical configuration for my firewall/gateway box: single network card, with a pppoe
connection to the DSL modem.
I'm already successfully shaping the uplink (how come that the wondershaper.htb doesn't use the ceil
parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough.
I'd like to keep the traffic categories i have in the uplink: ssh, web and batch.
The goal is to discard packets of the lowest class first, then the middle, and so on.
I've implemented a simmetrical downlink version of the uplink shaping on eth0, the other interface.
However, i get this error (warning?) in the log:
pppoe[29606]: send (sendPacket): No buffer space available
It looks like the interface queue is complaining that it cannot deliver a packet (the uplink queue
being full) and therefore discarding some packet. This is not the behaviour i meant.
Anybody has ideas/suggestions/comments?
As an alternative, it would be a pretty good solution to tell the polishing filter to discard only
packets where the source port is !22. But i'd rather stay away of a ingress policer, because i had
problems with it.
Thanks in advance,
MatB
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
reply other threads:[~2004-06-10 12:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40C85589.10907@tiscali.it \
--to=miagi@tiscali.it \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox