From: Damion de Soto <damion@snapgear.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] tbf token help
Date: Wed, 23 Jun 2004 00:01:35 +0000 [thread overview]
Message-ID: <40D8C85F.1020706@snapgear.com> (raw)
In-Reply-To: <200406211243.22474.mknific@siol.net>
Have you fully read:
http://lartc.org/howto/lartc.qdisc.classless.html#AEN691
?
most of it is explained in there.
> 1) What unit is token? Is "1 token = 1 byte" ?
> If this is so, then with rate=0.5mbit and HZ\x100 the bucket gets filled
> with 0,64kb (655 tokens) every 10ms?
1 token is one packet.
> 2) How much tokens are used for one packet (1500)?
1
> 3) And token unrelated question. Does packet droping alway ocurrs or
> it happens because of bad settings?
>
> I have applied this settings on 10mbit ethernet card:
> tc qdisc add dev eth1 root tbf rate 0.5mbit burst 5kb latency 70ms /
> peakrate 1mbit minburst 1540
>
> Result:
> qdisc tbf 8007: dev eth1 rate 512Kbit burst 5Kb/8 mpu 0b peakrate 1Mbit mtu
> 1539b/8 mpu 0b lat 68.4ms
> Sent 1284481 bytes 852 pkts (dropped 48, overlimits 1743)
Packet dropping happens when too much data is coming in.
See the explanation in the link above.
regards,
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer email: damion@snapgear.com
SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809
| Custom Embedded Solutions fax: +61 7 3891 3630
| and Security Appliances web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- Free Embedded Linux Distro at http://www.snapgear.org ---
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2004-06-23 0:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-21 10:43 [LARTC] tbf token help mknific
2004-06-23 0:01 ` Damion de Soto [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40D8C85F.1020706@snapgear.com \
--to=damion@snapgear.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox